This page shows how the Policy Design and API Flow to/from the PAP and PDPs works to support Model Driven Control Loops in Dublin.
The figure below shows the Artifacts (Blue) in the ONAP Policy Framework, the Activities (Yellow) that manipulate them, and important components (Pink) that interact with them.
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
Please see the TOSCA Policy Primer page for an introduction to TOSCA policy concepts.
TOSCA defines a PolicyType, the definition of a type of policy that can be applied to a service. In the Policy Framework, we must handle and manage these TOSCA definitions and tie them to real implementations of policies that can run on PDPs.
The diagram above outlines how this is achieved. Each TOSCA PolicyType must have a corresponding PolicyTypeImpl in the Policy Framework. Once the Policy artifact exists, it can be used together with the PolicyTypeImpl artifact to create a PolicyImpl artifact. A PolicyImpl artifact is an executable policy implementation that can run on a PDP.
The TOSCA PolicyType artifact defines the external characteristics of the policy; defining its properties, the types of entities it acts on, and its triggers. A PolicyTypeImpl artifact is an XACML, Drools, or APEX implementation of that policy definition. PolicyType and PolicyTypeImpl artifacts may be preloaded, may be loaded manually, or may be created using the Lifecycle API. Alternatively, PolicyType definitions may be loaded over the Lifecycle API for preloaded PolicyTypeImpl artifacts. A TOSCA PolicyType artifact can be used by clients (such as CLAMP or CLI tools) to create, parse, serialize, and/or deserialize an actual Policy.
The TOSCA Policy artifact is used internally by the Policy Framework, or is input by CLAMP or other systems. This artifact specifies the values of the properties for the policy and specifies the specific entities the policy acts on. Policy Design uses the TOSCA Policy artifact and the PolicyTypeImpl artifact to create an executable PolicyImpl artifact.
Policy Type Design manages TOSCA PolicyType artifacts and their PolicyTypeImpl implementations.
TOSCA PolicyType may ultimately be defined by the modeling team but for now are defined by the Policy Framework project. Various editors and GUIs are available for creating PolicyTypeImpl implementations. However, systematic integration of PolicyTypeImpl implementation is outside the scope of the ONAP Dublin release.
The PolicyType definitions and implementations listed below are preloaded and are always available for use in the Policy Framework.
Policy Type | Description |
---|
onap.policies.Monitoring | Overarching model that supports Policy driven DCAE microservice components used in a Control Loops |
onap.policies.controlloop.Operational | Used to support actor/action operational policies for control loops |
onap.policies.controlloop.Guard | Control Loop guard policies for policing control loops |
onap.policies.controlloop.Coordination | Control Loop Coordination policies to assist in coordinating multiple control loops at runtime |
This is a base Policy Type that supports Policy driven DCAE microservice components used in a Control Loops. The implementation of this Policy Type is developed using the XACML PDP to support question/answer Policy Decisions during runtime for the DCAE Policy Handler.
tosca_definitions_version: tosca_simple_yaml_1_0_0
policy_types:
- onap.policies.Monitoring:
derived_from: tosca.policies.Root
version: 1.0.0
description: a base policy type for all policies that govern monitoring provision
tosca_definitions_version: tosca_simple_yaml_1_0_0
policy_types:
- onap.policies.Monitoring:
derived_from: tosca.policies.Root
version: 1.0.0
description: a base policy type for all policies that govern monitoring provision
- onap.policies.monitoring.MyDCAEComponent:
derived_from: onap.policies.Monitoring
version: 1.0.0
properties:
mydcaecomponent_policy:
type: map
description: The Policy Body I need
entry_schema:
type: onap.datatypes.monitoring.mydatatype
data_types:
- onap.datatypes.monitoring.MyDataType:
derived_from: tosca.datatypes.Root
properties:
my_property_1:
type: string
description: A description of this property
constraints:
- valid_values:
- value example 1
- value example 2
tosca_definitions_version: tosca_simple_yaml_1_0_0
policy_types:
onap.policies.Monitoring:
derived_from: tosca.policies.Root
description: a base policy type for all policies that governs monitoring provisioning
onap.policy.monitoring.cdap.tca.hi.lo.app:
derived_from: onap.policies.Monitoring
version: 1.0.0
properties:
tca_policy:
type: map
description: TCA Policy JSON
entry_schema:
type: onap.datatypes.monitoring.tca_policy
data_types:
onap.datatypes.monitoring.metricsPerEventName:
derived_from: tosca.datatypes.Root
properties:
controlLoopSchemaType:
type: string
required: true
description: Specifies Control Loop Schema Type for the event Name e.g. VNF, VM
constraints:
- valid_values:
- VM
- VNF
eventName:
type: string
required: true
description: Event name to which thresholds need to be applied
policyName:
type: string
required: true
description: TCA Policy Scope Name
policyScope:
type: string
required: true
description: TCA Policy Scope
policyVersion:
type: string
required: true
description: TCA Policy Scope Version
thresholds:
type: list
required: true
description: Thresholds associated with eventName
entry_schema:
type: onap.datatypes.monitoring.thresholds
onap.datatypes.monitoring.tca_policy:
derived_from: tosca.datatypes.Root
properties:
domain:
type: string
required: true
description: Domain name to which TCA needs to be applied
default: measurementsForVfScaling
constraints:
- equal: measurementsForVfScaling
metricsPerEventName:
type: list
required: true
description: Contains eventName and threshold details that need to be applied to given eventName
entry_schema:
type: onap.datatypes.monitoring.metricsPerEventName
onap.datatypes.monitoring.thresholds:
derived_from: tosca.datatypes.Root
properties:
closedLoopControlName:
type: string
required: true
description: Closed Loop Control Name associated with the threshold
closedLoopEventStatus:
type: string
required: true
description: Closed Loop Event Status of the threshold
constraints:
- valid_values:
- ONSET
- ABATED
direction:
type: string
required: true
description: Direction of the threshold
constraints:
- valid_values:
- LESS
- LESS_OR_EQUAL
- GREATER
- GREATER_OR_EQUAL
- EQUAL
fieldPath:
type: string
required: true
description: Json field Path as per CEF message which needs to be analyzed for TCA
constraints:
- valid_values:
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedTotalPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedOctetsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedUnicastPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedMulticastPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedDiscardedPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedErrorPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedTotalPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedOctetsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedUnicastPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedMulticastPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedDiscardedPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedErrorPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedTotalPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedOctetsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedUnicastPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedMulticastPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedBroadcastPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedDiscardedPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedErrorPacketsDelta
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedTotalPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedOctetsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedUnicastPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedMulticastPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedBroadcastPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedDiscardedPacketsAccumulated
- $.event.measurementsForVfScalingFields.vNicPerformanceArray[*].transmittedErrorPacketsAccumulated
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].cpuIdle
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].cpuUsageInterrupt
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].cpuUsageNice
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].cpuUsageSoftIrq
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].cpuUsageSteal
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].cpuUsageSystem
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].cpuWait
- $.event.measurementsForVfScalingFields.cpuUsageArray[*].percentUsage
- $.event.measurementsForVfScalingFields.meanRequestLatency
- $.event.measurementsForVfScalingFields.memoryUsageArray[*].memoryBuffered
- $.event.measurementsForVfScalingFields.memoryUsageArray[*].memoryCached
- $.event.measurementsForVfScalingFields.memoryUsageArray[*].memoryConfigured
- $.event.measurementsForVfScalingFields.memoryUsageArray[*].memoryFree
- $.event.measurementsForVfScalingFields.memoryUsageArray[*].memoryUsed
- $.event.measurementsForVfScalingFields.additionalMeasurements[*].arrayOfFields[0].value
severity:
type: string
required: true
description: Threshold Event Severity
constraints:
- valid_values:
- CRITICAL
- MAJOR
- MINOR
- WARNING
- NORMAL
thresholdValue:
type: integer
required: true
description: Threshold value for the field Path inside CEF message
version:
type: string
required: true
description: Version number associated with the threshold
This policy type is used to support actor/action operational policies for control loops. There are two types of implementations for this policy type
- Existing Drools implementations that supports runtime Control Loop actions taken on components such as SO/APPC/VFC/SDNC/SDNR
- New implementations using APEX to support Control Loops.
For Dublin, this policy type will ONLY be used for the Policy Framework to distinguish the policy type as operational. The contents are still TBD for El Alto.
tosca_definitions_version: tosca_simple_yaml_1_0_0
policy_types:
onap.policies.controlloop.Operational:
derived_from: tosca.policies.Root
version: 1.0.0
description: Operational Policy for Control Loops
Applications should use the following Content-Type when creating onap.policies.controlloop.Operational policies:
Content-Type: "application/yaml; vnd.onap.operational"
For Dublin Drools will still support the Casablanca YAML definition of an Operational Policy for Control Loops.
Please use the Casablanca version of the YAML Operational Policy format defined https://git.onap.org/policy/drools-applications/tree/controlloop/common/policy-yaml/README-v2.0.0.md.
The operational Policy Type schema for for APEX will extend the base operational Policy Type schema. This Policy Type allows parameters specific to the APEX PDP to be specified as a TOSCA policy.
tosca_definitions_version: tosca_simple_yaml_1_0_0
# Note: The full APEX PolicyType definition will be developed during the Dublin
# timeframe of the ONAP project
policy_types:
onap.policies.controlloop.Operational:
derived_from: tosca.policies.Root
version: 1.0.0
description: Operational Policy for Control Loops
onap.policies.controloop.operational.Apex:
derived_from: onap.policies.controlloop.Operational
version: 1.0.0
description: Operational Policy for Control Loops using the APEX PDP
properties:
# Some of these properties may be redundant in a Kubernetes deployment
engine_service:
type: onap.datatypes.policies.controlloop.operational.apex.EngineService
description: APEX Engine Service Parameters
inputs:
type: map
description: Inputs for handling events coming into the APEX engine
entry_schema:
type: onap.datatypes.policies.controlloop.operational.apex.EventHandler
outputs:
type: map
description: Outputs for handling events going out of the APEX engine
entry_schema:
type: onap.datatypes.policies.controlloop.operational.apex.EventHandler
environment:
type: list
description: Envioronmental parameters for the APEX engine
entry_schema:
type: onap.datatypes.policies.controlloop.operational.apex.Environment
data_types:
onap.datatypes.policies.controlloop.operational.apex.EngineService:
derived_from: tosca.datatypes.Root
properties:
name:
type: string
description: Specifies the engine name
required: false
default: "ApexEngineService"
version:
type: string
description: Specifies the engine version in double dotted format
required: false
default: "1.0.0"
id:
type: int
description: Specifies the engine id
required: true
instance_count:
type: int
description: Specifies the number of engine threads that should be run
required: true
deployment_port:
type: int
description: Specifies the port to connect to for engine administration
required: false
default: 1
policy_model_file_name:
type: string
description: The name of the file from which to read the APEX policy model
required: false
default: ""
policy_type_impl:
type: string
description: The policy type implementation from which to read the APEX policy model
required: false
default: ""
periodic_event_period:
type: string
description: The time interval in milliseconds for the periodic scanning
event, 0 means "don't scan"
required: false
default: 0
engine:
type: onap.datatypes.policies.controlloop.operational.apex.engineservice.Engine
description: The parameters for all engines in the APEX engine service
required: true
onap.datatypes.policies.controlloop.operational.apex.EventHandler:
derived_from: tosca.datatypes.Root
properties:
name:
type: string
description: Specifies the event handler name, if not specified this is set to
the key name
required: false
carrier_technology:
type: onap.datatypes.policies.controlloop.operational.apex.CarrierTechnology
description: Specifies the carrier technology of the event handler (such
as REST/Web Socket/Kafka)
required: true
event_protocol:
type: onap.datatypes.policies.controlloop.operational.apex.EventProtocol
description: Specifies the event protocol of events for the event handler
(such as Yaml/JSON/XML/POJO)
required: true
event_name:
type: string
description: Specifies the event name for events on this event handler, if
not specified, the event name is read from or written to the event being
received or sent
required: false
event_name_filter:
type: string
description: Specifies a filter as a regular expression, events that do
not match the filter are dropped, the default is to let all events
through
required: false
synchronous_mode:
type: bool
description: Specifies the event handler is syncronous (receive event and
send response)
required: false
default: false
synchronous_peer:
type: string
description: The peer event handler (output for input or input for output)
of this event handler in synchronous mode, this parameter is mandatory if
the event handler is in synchronous mode
required: false
default: ""
synchronous_timeout:
type: int
description: The timeout in milliseconds for responses to be issued by
APEX torequests, this parameter is mandatory if the event handler is in
synchronous mode
required: false
default: ""
requestor_mode:
type: bool
description: Specifies the event handler is in requestor mode (send event
and wait for response mode)
required: false
default: false
requestor_peer:
type: string
description: The peer event handler (output for input or input for output)
of this event handler in requestor mode, this parameter is mandatory if
the event handler is in requestor mode
required: false
default: ""
requestor_timeout:
type: int
description: The timeout in milliseconds for wait for responses to
requests, this parameter is mandatory if the event handler is in
requestor mode
required: false
default: ""
onap.datatypes.policies.controlloop.operational.apex.CarrierTechnology:
derived_from: tosca.datatypes.Root
properties:
label:
type: string
description: The label (name) of the carrier technology (such as REST,
Kafka, WebSocket)
required: true
plugin_parameter_class_name:
type: string
description: The class name of the class that overrides default handling
of event input or output for this carrier technology, defaults to the supplied
input or output class
required: false
onap.datatypes.policies.controlloop.operational.apex.EventProtocol:
derived_from: tosca.datatypes.Root
properties:
label:
type: string
description: The label (name) of the event protocol (such as Yaml,
JSON, XML, or POJO)
required: true
event_protocol_plugin_class:
type: string
description: The class name of the class that overrides default handling
of the event protocol for this carrier technology, defaults to the
supplied event protocol class
required: false
onap.datatypes.policies.controlloop.operational.apex.Environmental:
derived_from: tosca.datatypes.Root
properties:
name:
type: string
description: The name of the environment variable
required: true
value:
type: string
description: The value of the environment variable
required: true
onap.datatypes.policies.controlloop.operational.apex.engineservice.Engine:
derived_from: tosca.datatypes.Root
properties:
context:
type: onap.datatypes.policies.controlloop.operational.apex.engineservice.engine.Context
description: The properties for handling context in APEX engines,
defaults to using Java maps for context
required: false
executors:
type: map
description: The plugins for policy executors used in engines such as
javascript, MVEL, Jython
required: true
entry_schema:
description: The plugin class path for this policy executor
type: string
onap.datatypes.policies.controlloop.operational.apex.engineservice.engine.Context:
derived_from: tosca.datatypes.Root
properties:
distributor:
type: onap.datatypes.policies.controlloop.operational.apex.Plugin
description: The plugin to be used for distributing context between
APEX PDPs at runtime
required: false
schemas:
type: map
description: The plugins for context schemas available in APEX PDPs
such as Java and Avro
required: false
entry_schema:
type: onap.datatypes.policies.controlloop.operational.apex.Plugin
locking:
type: onap.datatypes.policies.controlloop.operational.apex.plugin
description: The plugin to be used for locking context in and
between APEX PDPs at runtime
required: false
persistence:
type: onap.datatypes.policies.controlloop.operational.apex.Plugin
description: The plugin to be used for persisting context for APEX PDPs
at runtime
required: false
onap.datatypes.policies.controlloop.operational.apex.Plugin:
derived_from: tosca.datatypes.Root
properties:
name:
type: string
description: The name of the executor such as Javascript, Jython or MVEL
required: true
plugin_class_name:
type: string
description: The class path of the plugin class for this executor
This policy type is the the type definition for Control Loop guard policies for frequency limiting, blacklisting and min/max guards to help protect runtime Control Loop Actions from doing harm to the network. This policy type is developed using the XACML PDP to support question/answer Policy Decisions during runtime for the Drools and APEX onap.controlloop.Operational policy type implementations.
The base schema is defined as below:
tosca_definitions_version: tosca_simple_yaml_1_0_0
policy_types:
- onap.policies.controlloop.Guard:
derived_from: tosca.policies.Root
version: 1.0.0
description: Guard Policies for Control Loop Operational Policies
As with onap.policies.Monitoring policy type, the PolicyTypeImpl implementation of the onap.policies.controlloop.Guard Policy Type is generic to support definition of TOSCA PolicyType artifacts in the Policy Framework using the Policy Type Design API.
For Dublin, only the following derived below are preloaded in the Policy Framework. However, the creation of policies will still support the payload from Casablanca.
ContentType: "application/json; vnd.onap.guard"
Accepts: "application/json"
#
# Request BODY
#
{
"policy-id" : "guard.frequency.scaleout",
"contents" : {
"actor": "SO",
"recipe": "scaleOut",
"targets": ".*",
"clname": "ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3",
"limit": "1",
"timeWindow": "10",
"timeUnits": "minute",
"guardActiveStart": "00:00:01-05:00",
"guardActiveEnd": "23:59:59-05:00"
}
}
#
# Request RESPONSE
#
{
"guard.frequency.scaleout": {
"type": "onap.policies.controlloop.guard.FrequencyLimiter",
"version": "1.0.0",
"metadata": {
"policy-id": "guard.frequency.scaleout",
"policy-version": 1
}
}
}
This is WIP for El Alto for the proposed policy type.
tosca_definitions_version: tosca_simple_yaml_1_0_0
policy_types:
- onap.policies.controlloop.Guard:
derived_from: tosca.policies.Root
version: 1.0.0
description: Guard Policies for Control Loop Operational Policies
- onap.policies.controlloop.guard.FrequencyLimiter:
derived_from: onap.policies.controlloop.Guard
version: 1.0.0
description: Supports limiting the frequency of actions being taken by a Actor.
properties:
frequency_policy:
type: map
description:
entry_schema:
type: onap.datatypes.guard.FrequencyLimiter
data_types:
- onap.datatypes.guard.FrequencyLimiter:
derived_from: tosca.datatypes.Root
properties:
actor:
type: string
description: Specifies the Actor
required: true
recipe:
type: string
description: Specified the Recipe
required: true
time_window:
type: scalar-unit.time
description: The time window to count the actions against.
required: true
limit:
type: integer
description: The limit
required: true
constraints:
- greater_than: 0
time_range:
type: tosca.datatypes.TimeInterval
description: An optional range of time during the day the frequency is valid for.
required: false
controlLoopName:
type: string
description: An optional specific control loop to apply this guard to.
required: false
target:
type: string
description: An optional specific VNF to apply this guard to.
required: false
tosca_definitions_version: tosca_simple_yaml_1_0_0
policy_types:
- onap.policies.controlloop.Guard:
derived_from: tosca.policies.Root
version: 1.0.0
description: Guard Policies for Control Loop Operational Policies
- onap.policies.controlloop.guard.Blacklist:
derived_from: onap.policies.controlloop.Guard
version: 1.0.0
description: Supports blacklist of VNF's from performing control loop actions on.
properties:
blacklist_policy:
type: map
description:
entry_schema:
type: onap.datatypes.guard.Blacklist
data_types:
- onap.datatypes.guard.Blacklist:
derived_from: tosca.datatypes.Root
properties:
actor:
type: string
description: Specifies the Actor
required: true
recipe:
type: string
description: Specified the Recipe
required: true
time_range:
type: tosca.datatypes.TimeInterval
description: An optional range of time during the day the blacklist is valid for.
required: false
controlLoopName:
type: string
description: An optional specific control loop to apply this guard to.
required: false
blacklist:
type: list
description: List of VNF's
required: true
policy_types:
- onap.policies.controlloop.Guard:
derived_from: tosca.policies.Root
version: 1.0.0
description: Guard Policies for Control Loop Operational Policies
- onap.policies.controlloop.guard.MinMax:
derived_from: onap.policies.controlloop.Guard
version: 1.0.0
description: Supports Min/Max number of VF Modules
properties:
minmax_policy:
type: map
description:
entry_schema:
type: onap.datatypes.guard.MinMax
data_types:
- onap.datatypes.guard.MinMax:
derived_from: tosca.datatypes.Root
properties:
actor:
type: string
description: Specifies the Actor
required: true
recipe:
type: string
description: Specified the Recipe
required: true
time_range:
type: tosca.datatypes.TimeInterval
description: An optional range of time during the day the Min/Max limit is valid for.
required: false
controlLoopName:
type: string
description: An optional specific control loop to apply this guard to.
required: false
min_vf_module_instances:
type: integer
required: true
description: The minimum instances of this VF-Module
max_vf_module_instances:
type: integer
required: false
description: The maximum instances of this VF-Module
This policy type defines policies to assist in coordinating multiple control loops during runtime. This policy type is developed using XACML PDP to support question/answer policy decisions at runtime for the onap.policies.controlloop.operational policy types.
The unit of execution and scaling in the Policy Framework is a PolicyImpl entity. A PolicyImpl entity runs on a PDP. As is explained above a PolicyImpl entity is a PolicyTypeImpl implementation parameterized with a TOSCA Policy.
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
In order to achieve horizontal scalability, we group the PDPs running instances of a given PolicyImpl entity logically together into a PDPSubGroup. The number of PDPs in a PDPSubGroup can then be scaled up and down using Kubernetes. In other words, all PDPs in a subgroup run the same PolicyImpl, that is the same policy template implementation (in XACML, Drools, or APEX) with the same parameters.
The figure above shows the layout of PDPGroup and PDPSubGroup entities. The figure shows examples of PDP groups for Control Loop and Monitoring policies on the right.
The health of PDPs is monitored by the PAP in order to alert operations teams managing policy. The PAP manages the life cycle of policies running on PDPs.
The table below shows the methods in which PolicyImpl entities can be deployed to PDP Subgroups
Method | Description | Advantages | Disadvantages |
---|
Cold Deployment | The PolicyImpl (PolicyTypeImpl and TOSCA Policy) are predeployed on the PDP. The PDP is fully configured and ready to execute when started. PDPs register with the PAP when they start, providing the PolicyImpl they have been predeployed with. | No run time configuration required and run time administration is simple. | Very restrictive, no run time configuration of PDPs is possible. |
Warm Deployment | The PolicyTypeImpl entity is predeployed on the PDP. A TOSCA Policy may be loaded at startup. The PDP may be configured or reconfigured with a new or updated TOSCA Policy at run time. PDPs register with the PAP when they start, providing the PolicyImpl they have been predeployed with if any. The PAP may update the TOSCA Policy on a PDP at any time after registration. | The configuration, parameters, and PDP group of PDPs may be changed at run time by loading or updating a Lifecycle management of TOSCA Policy entities is supported, allowing features such as PolicyImpl Safe Mode and PolicyImpl retirement. | Administration and management is required. The configuration and life cycle of the TOSCA policies can change at run time and must be administered and managed. |
Hot Deployment | The PolicyImpl (PolicyTypeImpl and TOSCA Policy) are deployed at run time. The PolicyImpl (PolicyTypeImpl and TOSCA Policy) may be loaded at startup. The PDP may be configured or reconfigured with a new or updated PolicyTypeImpl and/or TOSCA Policy at run time. PDPs register with the PAP when they start, providing the PolicyImpl they have been predeployed with if any. The PAP may update the TOSCA Policy and PolicyTypeImpl on a PDP at any time after registration. | The policy logic, rules, configuration, parameters, and PDP group of PDPs may be changed at run time by loading or updating a TOSCA Policy and PolicyTypeImpl into the PDP. Lifecycle management of TOSCA Policy entities and PolicyTypeImpl entites is supported, allowing features such as PolicyImpl Safe Mode and PolicyImpl retirement. | Administration and management is more complex. The PolicyImpl itself and its configuration and life cycle as well as the life cycle of the TOSCA policies can change at run time and must be administered and managed. |
The Policy Framework supports the APIs documented in the subsections below. The APIs in this section are supported for use by external components.
The purpose of this API is to support CRUD of TOSCA PolicyType entities. This API is provided by the PolicyDevelopment component of the Policy Framework, see The ONAP Policy Framework architecture.
The API allows applications to create, update, delete, and query PolicyType entities so that they become available for use in ONAP by applications such as CLAMP. Some Policy Type entities are preloaded in the Policy Framework. The TOSCA fields below are valid on API calls:
Field | GET | POST | DELETE | Comment |
---|
(name) | M | M | M | The definition of the reference to the Policy Type, GET allows ranges to be specified |
version | O | M | C | GET allows ranges to be specified, must be specified if more than one version of the Policy Type exists |
description | R | O | N/A | Desciption of the Policy Type |
derived_from | R | C | N/A | Must be specified when a Policy Type is derived from another Policy Type such as in the case of derived Monitoring Policy Types |
metadata | R | O | N/A | Metadata for the Policy Type |
properties | R | M | N/A | This field holds the specification of the specific Policy Type in ONAP |
targets | R | O | N/A | A list of node types and/or group types to which the Policy Type can be applied |
triggers | R | O | N/A | Specification of policy triggers, not currently supported in ONAP |
Note: On this and subsequent tables, use the following legend: M-Mandatory, O-Optional, R-Read-only, C-Conditional. Conditional means the field is mandatory when some other field is present.
Note: Preloaded policy types may only be queried over this API, modification or deletion of preloaded policy type implementations is disabled.
Note: Policy types that are in use (referenced by defined Policies) may not be deleted
Note: The group types of targets in TOSCA are groups of TOSCA nodes, not PDP groups; the target concept in TOSCA is equivalent to the Policy Enforcement Point (PEP) concept
The API allows applications (such as CLAMP and Integration) to query the PolicyType entities that are available for Policy creation using a GET operation.
policy_types:
- onap.policies.Monitoring:
version: 1.0.0
description: A base policy type for all policies that govern monitoring provision
derived_from: tosca.policies.Root
properties:
# Omitted for brevity, see Section 1
- onap.policies.controlloop.Operational:
version: 1.0.0
description: Operational Policy for Control Loops
derived_from: tosca.policies.Root
properties:
# Omitted for brevity, see Section 1
- onap.policies.controloop.operational.Drools:
version: 1.0.0
description: Operational Policy for Control Loops using the Drools PDP
derived_from: onap.policies.controlloop.Operational
properties:
# Omitted for brevity, see Section 1
- onap.policies.controloop.operational.Apex:
version: 1.0.0
description: Operational Policy for Control Loops using the APEX PDP
derived_from: onap.policies.controlloop.Operational
properties:
# Omitted for brevity, see Section 1
- onap.policies.controlloop.Guard:
version: 1.0.0
description: Operational Policy for Control Loops
derived_from: tosca.policies.Root
properties:
# Omitted for brevity, see Section 1
- onap.policies.controlloop.guard.FrequencyLimiter:
version: 1.0.0
description: Supports limiting the frequency of actions being taken by a Actor.
derived_from: onap.policies.controlloop.Guard
properties:
# Omitted for brevity, see Section 1
- onap.policies.controlloop.guard.Blacklist:
version: 1.0.0
description: Supports blacklist of VNF's from performing control loop actions on.
derived_from: onap.policies.controlloop.Guard
properties:
# Omitted for brevity, see Section 1
- onap.policies.controlloop.guard.MinMax:
version: 1.0.0
description: Supports Min/Max number of VF Modules
derived_from: onap.policies.controlloop.Guard
properties:
# Omitted for brevity, see Section 1
- onap.policies.controlloop.coordination.TBD: (STRETCH GOALS)
version: 1.0.0
description: Control Loop Coordination policy types
derived_from: onap.policies.controlloop.Coordination
properties:
# Omitted for brevity, see Section 1
data_types:
# Any bespoke data types referenced by policy type definitions
The table below shows some more examples of GET operations
Example | Description |
---|
https:{url}:{port}/policy/api/v1/policytypes | Get all Policy Type entities in the system |
eg. https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app | Get a specific policy type and all the available versions.
|
eg. https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0 | Get the specific Policy Type with the specified name and version |
The API allows applications and users (such as a DCAE microservice component developer) to create or update a Policy Type using a POST operation. This API allows new Policy Types to be created or existing Policy Types to be modified. POST operations with a new Policy Type name or a new version of an existing Policy Type name are used to create a new Policy Type. POST operations with an existing Policy Type name and version are used to update an existing Policy Type. Many Policy Types can be created or updated in a single POST operation by specifying more than one Policy Type on the TOSCA policy_types list.
For example, the POST operation below with the TOSCA body below is used to create a new Policy type for a DCAE microservice.
https:{url}:{port}/policy/api/v1/policytypes POST
policy_types:
- onap.policies.monitoring.cdap.tca.hi.lo.app:
version: 1.0.0
derived_from: onap.policies.Monitoring
description: A DCAE TCA high/low policy type
properties:
tca_policy:
type: map
description: TCA Policy JSON
default:'{<JSON omitted for brevity>}'
entry_schema:
type: onap.datatypes.monitoring.tca_policy
data_types:
<omitted for brevity>
Following creation of a DCAE TCA policy type operation, the GET call for Monitoring policies will list the new policy type.
https:{url}:{port}/policy/api/v1/policytypes GET
policy_types:
- onap.policies.Monitoring:
version: 1.0.0
derived_from: tosca.policies.Root
description: A base policy type for all policies that govern monitoring provision
- onap.policies.monitoring.cdap.tca.hi.lo.app:
version: 1.0.0
derived_from: onap.policies.Monitoring
description: A DCAE TCA high/low policy type
- onap.policies.controlloop.Operational:
version: 1.0.0
description: Operational Policy for Control Loops
derived_from: tosca.policies.Root
- onap.policies.controloop.operational.Drools:
version: 1.0.0
description: Operational Policy for Control Loops using the Drools PDP
derived_from: onap.policies.controlloop.Operational
- onap.policies.controloop.operational.Apex:
version: 1.0.0
description: Operational Policy for Control Loops using the APEX PDP
derived_from: onap.policies.controlloop.Operational
- onap.policies.controlloop.Guard:
version: 1.0.0
description: Operational Policy for Control Loops
derived_from: tosca.policies.Root
- onap.policies.controlloop.guard.FrequencyLimiter:
version: 1.0.0
description: Supports limiting the frequency of actions being taken by a Actor.
derived_from: onap.policies.controlloop.Guard
- onap.policies.controlloop.guard.Blacklist:
version: 1.0.0
description: Supports blacklist of VNF's from performing control loop actions on.
derived_from: onap.policies.controlloop.Guard
- onap.policies.controlloop.guard.MinMax:
version: 1.0.0
description: Supports Min/Max number of VF Modules
derived_from: onap.policies.controlloop.Guard
- onap.policies.controlloop.coordination.TBD: (STRETCH GOALS)
version: 1.0.0
description: Control Loop Coordination policy types
derived_from: onap.policies.controlloop.Coordination
Now the onap.policies.Monitoring.cdap.tca.hi.lo.app Policy Type is available to CLAMP for creating concrete policies. See the Yaml contribution on the Model driven Control Loop Design page for a full listing of the DCAE TCA policy type used in the example above.
The API also allows Policy Types to be deleted with a DELETE operation. The format of the delete operation is as below:
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0 DELETE
Note: Predefined policy types cannot be deleted
Note: Policy types that are in use (Parameterized by a TOSCA Policy) may not be deleted, the parameterizing TOSCA policies must be deleted first
Note: The version parameter may be omitted on the DELETE operation if there is only one version of the policy type in the system
The purpose of this API is to support CRUD of TOSCA Policy entities from TOSCA compliant PolicyType definitions. TOSCA Policy entities become the parameters for PolicyTypeImpl entities, producing PolicyImpl entities that can run on PDPs. This API is provided by the PolicyDevelopment component of the Policy Framework, see The ONAP Policy Framework architecture.
This API allows applications (such as CLAMP and Integration) to create, update, delete, and query Policy entities. The below are valid on API calls:
Field | GET | POST | DELETE | Comment |
---|
(name) | M | M | M | The definition of the reference to the Policy, GET allows ranges to be specified |
type | O | M | O | The Policy Type of the policy, see section 3.1 |
description | R | O | O |
|
metadata | R | O | N/A |
|
properties | R | M | N/A | This field holds the specification of the specific Policy in ONAP |
targets | R | O | N/A | A list of nodes and/or groups to which the Policy can be applied |
Note: Policies that are deployed (used on deployed PolicyImpl entities) may not be deleted
Note: This API is NOT used by DCAE for a decision on what policy the DCAE PolicyHandler should retrieve and enforce
Note: The groups of targets in TOSCA are groups of TOSCA nodes, not PDP groups; the target concept in TOSCA is equivalent to the Policy Enforcement Point (PEP) concept
YAML is used for illustrative purposes in the examples in this section. JSON (application/json) will be used as the content type in the implementation of this API.
The API allows applications (such as CLAMP and Integration) to query the Policy entities that are available for deployment using a GET operation.
Note: This operation simply returns TOSCA policies that are defined in the Policy Framework, it does NOT make a decision.
The table below shows some more examples of GET operations
Example | Description |
---|
eg.
| Get all Policies for a specific Policy Type and version |
https://{url}:{port}/policy/api/v1/policytypes/{policy type id}/versions/{version}/policies/{policy name}/versions/{version} eg. https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies/onap.scaleout.tca/versions/1.0.0 GET | Gets a specific Policy version |
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies/onap.scaleout.tca/versions/latest GET | Returns the latest version of a Policy |
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies/onap.scaleout.tca/deployed GET | Returns the version of the Policy that has been deployed on one or more PDP groups. |
https://{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.2.3/policies/CL-LBAL-LOW-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241AB1A/versions/1.0.2 GET | Returns a specific version of a monitoring policy |
The API allows applications and users (such as CLAMP and Integration) to create or update a Policy using a POST operation. This API allows new Policies to be created or existing Policies to be modified. POST operations with a new Policy name are used to create a new Policy. POST operations with an existing Policy name are used to update an existing Policy. Many Policies can be created or updated in a single POST operation by specifying more than one Policy on the TOSCA policies list.
While designing a control loop using CLAMP, a Control Loop Designer uses the Policy Type for a specific DCAE mS component (See Section 3.1.1) to create a specific Policy. CLAMP then uses this API operation to submit the Policy to the Policy Framework.
For example, the POST operation below with the TOSCA body new scaleout Policy for the onap.policies.monitoring.cdap.tca.hi.lo.app microservice. The name of the policy "onap.scaleout.tca" is up to the user to determine themselves.
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.Monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies POST
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies POST
Content-Type: application/yaml
Accept: application/yaml
#Request Body
policies:
-
onap.scaleout.tca:
type: onap.policies.monitoring.cdap.tca.hi.lo.app
version: 1.0.0
metadata:
policy-id: onap.scaleout.tca # SHOULD MATCH THE TOSCA policy-name field above. DCAE needs this - convenience.
description: The scaleout policy for vDNS # GOOD FOR CLAMP GUI
properties:
domain: measurementsForVfScaling
metricsPerEventName:
-
eventName: vLoadBalancer
controlLoopSchemaType: VNF
policyScope: "type=configuration"
policyName: "onap.scaleout.tca"
policyVersion: "v0.0.1"
thresholds:
- closedLoopControlName: "CL-LBAL-LOW-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241AB1A"
closedLoopEventStatus: ONSET
version: "1.0.2"
fieldPath: "$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated"
thresholdValue: 500
direction: LESS_OR_EQUAL
severity: MAJOR
-
closedLoopControlName: "CL-LBAL-LOW-TRAFFIC-SIG-0C5920A6-B564-8035-C878-0E814352BC2B"
closedLoopEventStatus: ONSET
version: "1.0.2"
fieldPath: "$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated"
thresholdValue: 5000
direction: GREATER_OR_EQUAL
severity: CRITICAL
#Response Body
policies:
- onap.scaleout.tca:
type: onap.policies.monitoring.cdap.tca.hi.lo.app
version: 1.0.0
metadata:
#
# version is managed by Policy Lifecycle and returned
# back to the caller.
#
policy-version: 1
#
# These were passed in, and should not be changed. Will
# be passed back.
#
policy-id: onap.scaleout.tca
properties:
domain: measurementsForVfScaling
metricsPerEventName:
-
eventName: vLoadBalancer
controlLoopSchemaType: VNF
policyScope: "type=configuration"
<OMITTED FOR BREVITY>
Given a return code of success and a "metadata" section that indicates versioning information. The "metadata" section conforms exactly to how SDC implements lifecycle management versioning for first class normatives in the TOSCA Models. The policy platform will implement lifecycle identically to SDC to ensure conformity for policy . The new metadata fields return versioning details.
The new policy will be listed and will have a "metadata" section as shown below:
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies GET
policies:
- onap.scaleout.tca:
type: onap.policies.monitoring.cdap.tca.hi.lo.app
version: 1.0.0
metadata:
policy-id: onap.scaleout.tca
policy-version: 1
- my.other.policy:
type: onap.policies.monitoring.cdap.tca.hi.lo.app
version: 1.0.0
metadata:
invariantUUID: 20ad46cc-6b16-4404-9895-93d2baaa8d25
UUID: 4f715117-08b9-4221-9d63-f3fa86919742
version: 5
name: my.other.policy
scope: foo=bar;field2=value2
description: The policy for some other use case
- yet.another.policy:
type: onap.policies.monitoring.cdap.tca.hi.lo.app
version: 1.0.0
metadata:
invariantUUID: 20ad46cc-6b16-4404-9895-93d2baaa8d25
UUID: 4f715117-08b9-4221-9d63-f3fa86919742
version: 3
name: yet.another.policy
scope: foo=bar;
description: The policy for yet another use case
The contents of the new policy can be retrieved using the ID:
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies/onap.scaleout.tca GET
policies:
-
onap.scaleout.tca:
type: onap.policies.monitoring.cdap.tca.hi.lo.app
version: 1.0.0
metadata:
invariantUUID: 20ad46cc-6b16-4404-9895-93d2baaa8d25
UUID: 4f715117-08b9-4221-9d63-f3fa86919742
version: 1
name: onap.scaleout.tca
scope: foo=bar;
description: The scaleout policy for vDNS
properties:
domain: measurementsForVfScaling
<OMMITTED FOR BREVITY>
3.2.2.2 Operational Policy Create/Update
While designing an operational policy, the designer uses the Policy Type for the operational policy (See Section 3.1.1) to create a specific Policy and submits the Policy to the Policy Framework.
This URL will be fixed for CLAMP in Dublin and the payload will match updated version of Casablanca YAML that supports VFModules.
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.controloop.operational/versions/1.0.0/policies POST
Content-Type: application/yaml; legacy-version
FUTURE: Content-Type: application/yaml; tosca
NOTE: The controlLoopName will be assumed to be the policy-id
tosca_definitions_version: tosca_simple_yaml_1_0_0
topology_template:
policies:
-
operational.scaleout:
type: onap.policies.controlloop.Operational
version: 1.0.0
metadata:
policy-id: operational.scaleout
properties:
controlLoop:
version: 2.0.0
controlLoopName: ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3
trigger_policy: unique-policy-id-1-scale-up
timeout: 1200
abatement: false
policies:
- id: unique-policy-id-1-scale-up
name: Create a new VF Module
description:
actor: SO
recipe: VF Module Create
target:
type: VNF
payload:
requestParameters: '{"usePreload":true,"userParams":[]}'
configurationParameters: '[{"ip-addr":"$.vf-module-topology.vf-module-parameters.param[9]","oam-ip-addr":"$.vf-module-topology.vf-module-parameters.param[16]","enabled":"$.vf-module-topology.vf-module-parameters.param[23]"}]'
retry: 0
timeout: 1200
success: final_success
failure: final_failure
failure_timeout: final_failure_timeout
failure_retries: final_failure_retries
failure_exception: final_failure_exception
failure_guard: final_failure_guard
tosca_definitions_version: tosca_simple_yaml_1_0_0
topology_template:
policies:
-
operational.scaleout:
type: onap.policies.controlloop.Operational
version: 1.0.0
metadata:
policy-id: operational.scaleout
policy-version: 1
properties:
controlLoop:
version: 2.0.0
controlLoopName: ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3
trigger_policy: unique-policy-id-1-scale-up
timeout: 1200
abatement: false
policies:
- id: unique-policy-id-1-scale-up
name: Create a new VF Module
description:
actor: SO
recipe: VF Module Create
target:
type: VNF
payload:
requestParameters: '{"usePreload":true,"userParams":[]}'
configurationParameters: '[{"ip-addr":"$.vf-module-topology.vf-module-parameters.param[9]","oam-ip-addr":"$.vf-module-topology.vf-module-parameters.param[16]","enabled":"$.vf-module-topology.vf-module-parameters.param[23]"}]'
retry: 0
timeout: 1200
success: final_success
failure: final_failure
failure_timeout: final_failure_timeout
failure_retries: final_failure_retries
failure_exception: final_failure_exception
failure_guard: final_failure_guard
TBD Jorge Hernandez
The POST operation below with the TOSCA body below is used to create a new Sample Domain test polict for the APEX Sample Domain operational policy type.
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.controloop.operational.apex/versions/1.0.0/policies POST
policies:
- onap.policy.operational.apex.sampledomain.Test:
type: onap.policies.controloop.operational.Apex
properties:
engine_service:
name: "MyApexEngine"
version: "0.0.1"
id: 45
instance_count: 4
deployment_port: 12561
policy_type_impl: "onap.policies.controlloop.operational.apex.sampledomain.Impl"
engine:
executors:
JAVASCRIPT: "org.onap.policy.apex.plugins.executor.javascript.JavascriptExecutorParameters"
inputs:
first_consumer:
carrier_technology:
label: "RESTCLIENT",
plugin_parameter_class_name: "org.onap.policy.apex.plugins.event.carrier.restclient.RestClientCarrierTechnologyParameters",
parameters:
url: "https://localhost:32801/EventGenerator/GetEvents"
event_protocol:
label: "JSON"
outputs:
first_producer:
carrier_technology:
label: "RESTCLIENT",
plugin_parameter_class_name: "org.onap.policy.apex.plugins.event.carrier.restclient.RestClientCarrierTechnologyParameters",
parameters:
url: "https://localhost:32801/EventGenerator/PostEvent"
event_protocol:
label: "JSON"
TBD Pamela Dragosh Similar to Operational Policies
TBD Similar to Operational Policies, stretch for Dublin
The API also allows Policies to be deleted with a DELETE operation. The format of the delete operation is as below:
Example | Description |
---|
https:{url}:{port}/policy/api/v1/policytypes/onap.policies.monitoring.cdap.tca.hi.lo.app/versions/1.0.0/policies/onap.scaleout.tca DELETE | Deletes a Policy - all versions will be deleted. NOTE: The API call will fail if the policy has been deployed in one or more PDP Group. They must be undeployed first from all PDP Groups. |
The purpose of this API is to support CRUD of PDP groups and subgroups and to support the deployment and life cycles of PolicyImpl entities (TOSCA Policy and PolicyTypeImpl entities) on PDP sub groups and PDPs. See Section 2 for details on policy deployment on PDP groups and subgroups. This API is provided by the PolicyAdministration component (PAP) of the Policy Framework, see The ONAP Policy Framework architecture.
PDP groups and subgroups may be prefedined in the system. Predefined groups and subgroups may not be modified or deleted over this API. However, the policies running on predefined groups or subgroups as well as the instance counts and properties may be modified.
A PDP may be preconfigured with its PDP group, PDP subgroup, and policies. The PDP sends this information to the PAP when it starts. If the PDP group, subgroup, or any policy is unknown to the PAP, the PAP locks the PDP in state PASSIVE.
The fields below are valid on API calls:
Field | GET | POST | DELETE | Comment |
---|
name | M | M | M | The name of the PDP group |
version | O | M | C | The version of the PDP group |
state | R | N/A | N/A | The administrative state of the PDP group: PASSIVE, SAFE, TEST, or ACTIVE |
description | R | O | N/A | The PDP group description |
properties | R | O | N/A | Specific properties for a PDP group |
pdp_subgroups | R | M | N/A | A list of PDP subgroups for a PDP group |
| pdp_type | R | M | N/A | The PDP type of this PDP subgroup, currently xacml, drools, or apex |
| supported_policy_types | R | N/A | N/A | A list of the policy types supported by the PDPs in this PDP subgroup |
| policies | R | M | N/A | The list of policies running on the PDPs in this PDP subgroup |
|
| (name) | R | M | N/A | The name of a TOSCA policy running in this PDP subgroup |
|
| policy_type | R | N/A | N/A | The TOSCA policy type of the policy |
|
| policy_type_version | R | N/A | N/A | The version of the TOSCA policy type of the policy |
|
| policy_type_impl | R | C | N/A | The policy type implementation (XACML, Drools Rules, or APEX Model) that implements the policy |
| instance_count | R | N/A | N/A | The number of PDP instances running in a PDP subgroup |
| min_instance_count | O | N/A | N/A | The minumum number of PDP instances to run in a PDP subgroup |
| properties | O | N/A | N/A | Deployment configuration or other properties for the PDP subgroup |
| deployment_info | R | N/A | N/A | Information on the deployment for a PDP subgroup |
| instances | R | N/A | N/A | A list of PDP instances running in a PDP subgroup |
|
| instance | R | N/A | N/A | The instance ID of a PDP running in a Kuberenetes Pod |
|
| state | R | N/A | N/A | The administrative state of the PDP: PASSIVE, SAFE, TEST, or ACTIVE |
|
| healthy | R | N/A | N/A | The result of the latest health check on the PDP: HEALTHY/NOT_HEALTHY/TEST_IN_PROGRESS |
|
| message | O | N/A | N/A | A status message for the PDP if any |
|
| deployment_instance_info | R | N/A | N/A | Information on the node running the PDP |
Note: In the Dublin release, the policy_type_impl of all policy types in a PDP subgroup must be the same.
YAML is used for illustrative purposes in the examples in this section. JSON (application/json) will be used as the content type in the implementation of this API.
This operation allows the PDP groups and subgroups to be listed together with the policies that are deployed on each PDP group and subgroup.
https:{url}:{port}/policy/pap/v1/pdps GET
pdp_groups:
- name: onap.pdpgroup.controlloop.Operational
version: 1.0.0
state: active
description: ONAP Control Loop Operational and Guard policies
properties:
# PDP group level properties if any
pdp_subgroups:
pdp_type: drools
supported_policy_types:
- onap.controllloop.operational.drools.vCPE
- onap.controllloop.operational.drools.vFW
policies:
- onap.controllloop.operational.drools.vCPE.eastRegion:
policy_type: onap.controllloop.operational.drools.vCPE
policy_type_version: 1.0.0
policy_type_impl: onap.controllloop.operational.drools.impl
- onap.controllloop.operational.drools.vFW.eastRegion:
policy_type: onap.controllloop.operational.drools.vFW
policy_type_version: 1.0.0
policy_type_impl: onap.controllloop.operational.drools.impl
min_instance_count: 3
instance_count: 3
properties:
# The properties below are for illustration only
instance_spawn_load_threshold: 70%
instance_kill_load_threshold: 50%
instance_geo_redundancy: true
deployment_info:
service_endpoint: https://<the drools service endpoint for this PDP group>
deployment: A deployment identifier
# Other deployment info
instances:
- instance: drools_1
state: active
healthy: yes
deployment_instance_info:
node_address: drools_1_pod
# Other deployment instance info
- instance: drools_2
state: active
healthy: yes
deployment_instance_info:
node_address: drools_2_pod
# Other deployment instance info
- instance: drools_3
state: active
healthy: yes
deployment_instance_info:
node_address: drools_3_pod
# Other deployment instance info
- pdp_type: apex
supported_policy_types:
- onap.controllloop.operational.apex.BBS
- onap.controllloop.operational.apex.SampleDomain
policies:
- onap.controllloop.operational.apex.BBS.eastRegion:
policy_type: onap.controllloop.operational.apex.BBS
policy_type_version: 1.0.0
policy_type_impl: onap.controllloop.operational.apex.impl
- onap.controllloop.operational.apex.sampledomain.eastRegion:
policy_type: onap.controllloop.operational.apex.SampleDomain
policy_type_version: 1.0.0
policy_type_impl: onap.controllloop.operational.apex.impl
min_instance_count: 2
instance_count: 3
properties:
# The properties below are for illustration only
instance_spawn_load_threshold: 80%
instance_kill_load_threshold: 60%
instance_geo_redundancy: true
deployment_info:
service_endpoint: https://<the apex service endpoint for this PDP group>
deployment: A deployment identifier
# Other deployment info
instances:
- instance: apex_1
state: active
healthy: yes
deployment_instance_info:
node_address: apex_1_podgroup
# Other deployment instance info
- instance: apex_2
deployment_instance_info:
node_address: apex_2_pod
# Other deployment instance infoCreation
- instance: apex_3
state: active
healthy: yes
deployment_instance_info:
node_address: apex_3_pod
# Other deployment instance info
- pdp_type: xacml
supported_policy_types:
- onap.policies.controlloop.guard.FrequencyLimiter
- onap.policies.controlloop.guard.BlackList
- onap.policies.controlloop.guard.MinMax
policies:
- onap.policies.controlloop.guard.frequencylimiter.EastRegion:
policy_type: onap.policies.controlloop.guard.FrequencyLimiter
policy_type_version: 1.0.0
policy_type_impl: onap.controllloop.guard.impl
- onap.policies.controlloop.guard.blackList.EastRegion:
policy_type: onap.policies.controlloop.guard.BlackList
policy_type_version: 1.0.0
policy_type_impl: onap.controllloop.guard.impl
- onap.policies.controlloop.Guard.MinMax.EastRegion:
policy_type: onap.policies.controlloop.guard.MinMax
policy_type_version: 1.0.0
policy_type_impl: onap.controllloop.guard.impl
min_instance_count: 2
instance_count: 2
properties:
# The properties below are for illustration only
instance_geo_redundancy: true
deployment_info:
service_endpoint: https://<the XACML service endpoint for this PDP group>
deployment: A deployment identifier
# Other deployment info
instances:
- instance: xacml_1
state: active
healthy: yes
deployment_instance_info:
node_address: xacml_1_pod
# Other deployment instance info
- instance: xacml_2
state: active
healthy: yes
deployment_instance_info:
node_address: xacml_2_pod
# Other deployment instance info
- name: onap.pdpgroup.monitoring
version: 2.1.3
state: active
description: DCAE mS Configuration Policies
properties:
# PDP group level properties if any
pdp_subgroups:
- pdp_type: xacml
supported_policy_types:
- onap.policies.monitoring.cdap.tca.hi.lo.app
policies:
- onap.scaleout.tca:
policy_type: onap.policies.monitoring.cdap.tca.hi.lo.app
policy_type_version: 1.0.0
policy_type_impl: onap.policies.monitoring.impl
min_instance_count: 2
instance_count: 2
properties:
# The properties below are for illustration only
instance_geo_redundancy: true
deployment_info:
service_endpoint: https://<the XACML service endpoint for this PDP group>
deployment: A deployment identifier
# Other deployment info
instances:
- instance: xacml_1
state: active
healthy: yes
deployment_instance_info:
node_address: xacml_1_pod
# Other deployment instance info
- instance: xacml_2
state: active
healthy: yes
deployment_instance_info:
node_address: xacml_2_pod
# Other deployment instance info
The table below shows some more examples of GET operations
Example | Description |
---|
https:{url}:{port}/policy/pap/v1/pdps
| Get all PDP Groups and subgroups in the system |
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.controlloop
| Get PDP Groups and subgroups that match the supplied name filter
|
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.monitoring/versions/2.1.3 | Get the PDP group with the specified name and version, a version of latest gets the latest version |
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.monitoring/subgroups/xacml | Get the PDP subgroup informtation for the specified subgroup |
This operation allows the PDP groups and subgroups to be created and deployed together with their policies. A POST operation is used to create a new PDP group name or a new PDP group version. A POST operation is also used to update an existing PDP group, but the PDP group must be in state PASSIVE or the operation is rejected. Many PDP groups can be created or updated in a single POST operation by specifying more than one PDP group in the POST operation body.
https:{url}:{port}/policy/pap/v1/pdps POST
pdp_groups:
- name: onap.pdpgroup.controlloop.operational
version: 1.0.0
description: ONAP Control Loop Operational and Guard policies
pdp_subgroups:
- pdp_type: drools
policies:
- onap.controllloop.operational.drools.vcpe.EastRegion
- onap.controllloop.operational.drools.vfw.EastRegion
min_instance_count: 3group
properties:
# The properties below are for illustration only
instance_spawn_load_threshold: 70%
instance_kill_load_threshold: 50%
instance_geo_redundancy: true
- pdp_type: apex
policies:
- onap.controllloop.operational.apex.bbs.EastRegion
- onap.controllloop.operational.apex.sampledomain.EastRegion
min_instance_count: 2
properties:
# The properties below are for illustration only
instance_spawn_load_threshold: 80%
instance_kill_load_threshold: 60%
instance_geo_redundancy: true
- pdp_type: xacml
policies:
- onap.policies.controlloop.guard.frequencylimiter.EastRegion
- onap.policies.controlloop.guard.blacklist.EastRegion
- onap.policies.controlloop.guard.minmax.EastRegion
min_instance_count: 2
properties:
# The properties below are for illustration only
instance_geo_redundancy: true
- name: onap.pdpgroup.monitoring
version: 2.1.3
description: DCAE mS Configuration Policies
properties:
# PDP group level properties if any
pdp_subgroups:
- pdp_type: xacml
policies:
- onap.scaleout.tca
min_instance_count: 2
properties:
# The properties below are for illustration only
instance_geo_redundancy: true
Other systems such as CLAMP can use this API to deploy policies using a POST operation with the body below where only mandatory fields are specified.
https:{url}:{port}/policy/pap/v1/pdps POST
pdp_groups:
- name: onap.pdpgroup.Monitoring
version: 2.1.3
description: DCAE mS Configuration Policies
pdp_subgroups:
- pdp_type: xacml
policies:
- onap.scaleout.tca
https:{url}:{port}/policy/pap/v1/pdps POST ???
Content-Type: application/json; HERE OR NOT???
{
"policies" : [
{
"policy-id": "onap.scaleout.tca",
"policy-version": 1
},
{
"policy-id": "ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3"
},
{
"policy-id": "guard.frequency.ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3"
},
{
"policy-id": "guard.minmax.ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3"
}
]
}
NEED Equivalent for UNDEPLOY - maybe just specify above.
The API also allows PDP groups to be deleted with a DELETE operation. DELETE operations are only permitted on PDP groups in PASSIVE state. In cases where more than one version of a PDP group exist, the version parameter must be specified on the DELETE operation. The format of the delete operation is as below:
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.monitoring/versions/2.1.3 DELETE
The state of PDP groups is managed by the API. PDP groups can be in states PASSIVE, TEST, SAFE, or ACTIVE. For a full description of PDP group states, see The ONAP Policy Framework architecture page. The state of a PDP group is changed with a PUT operation.
The following PUT operation changes a PDP group to ACTIVE:
https:{url}:{port}/policy/pap/v1/pdps/groups/name=onap.pdpgroup.monitoring/versions/2.1.3&state=active
There are a number of rules for state management:
- Only one version of a PDP group may be ACTIVE at any time
- If a PDP group with a certain version is ACTIVE and a later version of the same PDP group is activated, then the system upgrades the PDP group
- If a PDP group with a certain version is ACTIVE and an earlier version of the same PDP group is activated, then the system downgrades the PDP group
- There is no restriction on the number of PASSIVE versions of a PDP group that can exist in the system
- <Rules on SAFE/TEST> ? Pamela Dragosh
This operation allows statistics for PDP groups, PDP subgroups, and individual PDPs to be retrieved.
https:{url}:{port}/policy/pap/v1/pdps/statistics GET
report_timestamp: 2019-02-11T15:23:50+00:00
pdp_group_count: 2
pdp_groups:
- name: onap.pdpgroup.controlloop.Operational
state: active
create_timestamp: 2019-02-11T15:23:50+00:00
update_timestamp: 2019-02-12T15:23:50+00:00
state_change_timestamp: 2019-02-13T15:23:50+00:00
pdp_subgroups:
- pdp_type: drools
instance_count: 3
deployed_policy_count: 2
policy_execution_count: 123
policy_execution_ok_count: 121
policy_execution_fail_count: 2
instances:
- instance: drools_1
start_timestamp: 2019-02-13T15:23:50+00:00
policy_execution_count: 50
policy_execution_ok_count: 49
policy_execution_fail_count: 1
- instance: drools_2
start_timestamp: 2019-02-13T15:30:50+00:00
policy_execution_count: 50
policy_execution_ok_count: 49
policy_execution_fail_count: 1
- instance: drools_3
start_timestamp: 2019-02-13T15:33:50+00:00
policy_execution_count: 23
policy_execution_ok_count: 23
policy_execution_fail_count: 0
The table below shows some more examples of GET operations for statistics
Example | Description |
---|
https:{url}:{port}/policy//v1/pdps/statistics
| Get statistics for all PDP Groups and subgroups in the system |
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.controlloop/statistics
| Get statistics for all PDP Groups and subgroups that match the supplied name filter
|
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.monitoring/versions/2.1.3/statistics | Get statistics for all the PDP group with the specified name and version |
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.monitoring/subgroups/xacml/statistics | Get statistics for the specified subgroup |
A PDP group health check allows ordering of health checks on PDP groups and on individual PDPs. As health checks may be long lived operations, Health checks are scheduled for execution by this operation. Users check the result of a health check test by issuing a PDP Group Query operation (see Section 3.3.1) and checking the healthy field of PDPs.
https:{url}:{port}/policy/pap/v1/pdps/healthcheck PUT
The operation returns a HTTP status code of 202: Accepted if the health check request has been accepted by the PAP. The PAP then orders execution of the health check on the PDPs. The health check result is retrieved with a subsequent GET operation.
The table below shows some more examples of PUT operations for ordering health checks
Example | Description |
---|
https:{url}:{port}/policy/pap/v1/pdps/healthcheck PUT
| Order a health check on all PDP Groups and subgroups in the system |
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.controlloop/healthcheck PUT
| Order a health check on all PDP Groups and subgroups that match the supplied name filter
|
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.monitoring/versions/2.1.3/healthcheck PUT
| Order a health check on all the PDP group with the specified name and version |
https:{url}:{port}/policy/pap/v1/pdps/groups/onap.pdpgroup.monitoring/subgroups/xacml/healthcheck PUT
| Order a health check on the specified subgroup |
Policy decisions are required by ONAP components to support the policy-driven ONAP architecture. Policy Decisions are implemented using the XACML PDP. The calling application must provide attributes in order for the XACML PDP to return a correct decision.
The schema for the decision API is defined below.
*** some sections/fields are optional, we need to mark these ***
{
"$schema": "https://json-schema.org/draft-06/schema#",
"$ref": "#/definitions/ONAPPolicyDecisionAPISchema",
"definitions": {
"ONAPPolicyDecisionAPISchema": {
"title": "ONAP Policy Decision API Schema",
"type": "object",
"properties": {
"pep": {
"$ref": "#/definitions/Pep"
},
"action": {
"type": "string"
},
"resource": {
"type": "array",
"items": {
"$ref": "#/definitions/Resource"
}
}
},
"required": [
"action",
"pep",
"resource"
]
},
"Pep": {
"type": "object",
"properties": {
"name": {
"type": "string"
},
"instance": {
"type": "string"
}
},
"required": [
"name"
],
"title": "Pep"
},
"Resource": {
"type": "object",
"additionalProperties": false,
"properties": {
"policy-metadata": {
"$ref": "#/definitions/PolicyMetadata"
},
"service-metadata": {
"$ref": "#/definitions/aaiMetadata"
},
"resource-metadata": {
"$ref": "#/definitions/aaiMetadata"
},
"closedLoopControlName": {
"type": "array",
"items": {
"type": "string"
}
}
},
"required": [],
"title": "Resource"
},
"PolicyMetadata": {
"type": "object",
"additionalProperties": false,
"properties": {
"policy-id": {
"type": "string"
},
"policy-type": {
"type": "string"
}
},
"required": [],
"title": "PolicyMetadata"
},
"aaiMetadata": {
"type": "object",
"additionalProperties": false,
"properties": {
"model-invariant-id": {
"type": "string",
"format": "uuid"
},
"model-version-id": {
"type": "string",
"format": "uuid"
},
"name": {
"type": "string"
}
},
"required": [],
"title": "Service and Resource A&AI metadata"
}
}
}
Decision API queries are implemented with a POST operation with a JSON body that specifies the filter for the policies to be returned. The JSON body must comply with the schema sepcified in Section 3.4.1.
Field | R/O | Type | Description |
---|
ONAPName | R | String | Name of the ONAP component that is making the request. |
ONAPInstance | O | String | Optional instance identification for that ONAP component. |
action | R | String | The action that the ONAP component is performing on a resource. eg. "configure" → DCAE uS onap.Monitoring policy Decisions to configure uS "naming" "placement" "guard" |
These sub metadata structures are used to refine which resource the ONAP component is performing an action upon. At least one is required in order for Policy to return a Decision. Multiple structures may be utilized to help refine a Decision. |
policy-type-name |
| String | The policy type name. This may be a regular expression. |
policy-id |
| String | The policy id. This may be a regular expression or an exact value. |
|
|
|
|
|
|
|
|
|
|
|
|
The simple draft example below shows the JSON body of a query in which all the deployed policies for a specific policy type are returned.
{
"ONAPName": "DCAE",
"ONAPInstance": "policy-handler-0",
"action": "configure",
"resource": [
{
"policy-metadata": {
"policy-type": "onap.policies.monitoring.cdap.tca.hi.lo.app"
}
}
]
}
The query above gives a response similar to the example shown below.
{
"onap.scaleout.tca": {
"type": "onap.policies.monitoring.cdap.tca.hi.lo.app",
"version": "1.0.0",
"metadata": {
"policy-id": "onap.scaleout.tca",
"policy-version": 1
},
"properties": {
"domain": "measurementsForVfScaling",
"metricsPerEventName": [
{
"eventName": "vLoadBalancer",
"controlLoopSchemaType": "VNF",
"policyScope": "resource=vLoadBalancer;type=configuration",
"policyName": "onap.scaleout.tca",
"policyVersion": "v0.0.1",
"thresholds": [
{
"closedLoopControlName": "CL-LBAL-LOW-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241AB1A",
"closedLoopEventStatus": "ONSET",
"version": "1.0.2",
"fieldPath": "$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated",
"thresholdValue": 500,
"direction": "LESS_OR_EQUAL",
"severity": "MAJOR"
},
{
"closedLoopControlName": "CL-LBAL-LOW-TRAFFIC-SIG-0C5920A6-B564-8035-C878-0E814352BC2B",
"closedLoopEventStatus": "ONSET",
"version": "1.0.2",
"fieldPath": "$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated",
"thresholdValue": 5000,
"direction": "GREATER_OR_EQUAL",
"severity": "CRITICAL"
}
]
}
]
}
}
}
The draft example below shows the JSON body of a query in which all possible query fields are specified. This is the most fine-grained query one can create.
{
"pep": {
"name": "DCAE",
"instance": "policy-handler-0"
},
"action": "configure",
"resource": [
{
"policy-metadata": {
"policy-id": "onap.scaleout.tca",
"policy-type": "onap.policies.monitoring.cdap.tca.hi.lo.app"
}
},
{
"service-metadata": {
"model-invariant-id": "ebacca8b-9fb8-498a-8a2b-24757f5236a9",
"model-version-id": "e9129f70-1657-4e6d-955c-2651aba4cc28",
"name": "vLoadBalancerMS"
}
},
{
"resource-metadata": {
"model-invariant-id": "20ad46cc-6b16-4404-9895-93d2baaa8d25",
"model-version-id": "4f715117-08b9-4221-9d63-f3fa86919742",
"name": "vLoadBalancerMS"
}
},
{
"controlloop-metadata": {
"closedLoopControlName": "CL-FRWL-LOW-TRAFFIC-SIG-d925ed73-8231-4d02-9545-db4e101f88f8"
}
}
]
}
The Policy Framework uses the internal APIs documented in the subsections below. The APIs in this section are used for internal communication in the Policy Framework. The APIs are NOT supported for use by components outside the Policy Framework and are subject to revision and change at any time.
This section describes the API between the PAP and PDPs. The APIs in this section are implemented using DMaaP API messaging. There are four messages on the API:
- PDP_STATUS: PDP→PAP, used by PDPs to report to the PAP
- PDP_UPDATE: PAP→PDP, used by the PAP to update the policies running on PDPs, triggers a PDP_STATUS message with the result of the PDP_UPDATE operation
- PDP_STATE_CHANGE: PAP→PDP, used by the PAP to change the state of PDPs, triggers a PDP_STATUS message with the result of the PDP_STATE_CHANGE operation
- PDP_HEALTH_CHECK: PAP→PDP, used by the PAP to order a heakth check on PDPs, triggers a PDP_STATUS message with the result of the PDP_HEALTH_CHECK operation
The fields below are valid on API calls:
Field | PDP STATUS | PDP UPDATE | PDP STATE CHANGE | PDP HEALTH CHECK | Comment |
---|
(message_name) | M | M | M | M | pdp_status, pdp_update, pdp_state_change, or pdp_health_check |
name | M | M | C | C | The name of the PDP, for state changes and health checks, the PDP group and subgroup can be used to specify the scope of the operation |
version | M | N/A | N/A | N/A | The version of the PDP |
pdp_type | M | M | N/A | N/A | The type of the PDP, currently xacml, drools, or apex |
state | M | N/A | M | N/A | The administrative state of the PDP group: PASSIVE, SAFE, TEST, ACTIVE, or TERMINATED |
healthy | M | N/A | N/A | N/A | The result of the latest health check on the PDP: HEALTHY/NOT_HEALTHY/TEST_IN_PROGRESS |
description | O | O | N/A | N/A | The description of the PDP |
pdp_group | O | M | C | C | The PDP group to which the PDP belongs, the PDP group and subgroup can be used to specify the scope of the operation |
pdp_subgroup | O | M | C | C | The PDP subgroup to which the PDP belongs, the PDP group and subgroup can be used to specify the scope of the operation |
supported_policy_types | M | N/A | N/A | N/A | A list of the policy types supported by the PDP |
policies | O | M | N/A | N/A | The list of policies running on the PDP |
| (name) | O | M | N/A | N/A | The name of a TOSCA policy running on the PDP |
| policy_type | O | M | N/A | N/A | The TOSCA policy type of the policyWhen a PDP starts, it commences periodic sending of PDP_STATUS messages on DMaaP. The PAP receives these messages and acts in whatever manner is appropriate. |
| policy_type_version | O | M | N/A | N/A | The version of the TOSCA policy type of the policy |
| properties | O | M | N/A | N/A | The properties of the policy for the XACML, Drools, or APEX PDP, see section 3.2 for details |
instance | M | N/A | N/A | N/A | The instance ID of the PDP running in a Kuberenetes Pod |
deployment_instance_info | M | N/A | N/A | N/A | Information on the node running the PDP |
properties | O | O | N/A | N/A | Other properties specific to the PDP |
statistics | M | N/A | N/A | N/A | Statistics on policy execution in the PDP |
| policy_download_count | M | N/A | N/A | N/A | The number of policies downloaded into the PDP |
| policy_download_success_count | M | N/A | N/A | N/A | The number of policies successfully downloaded into the PDP |
| policy_download_fail_count | M | N/A | N/A | N/A | The number of policies downloaded into the PDP where the download failed |
| policy_executed_count | M | N/A | N/A | N/A | The number of policy executions on the PDP |
| policy_executed_success_count | M | N/A | N/A | N/A | The number of policy executions on the PDP that completed successfully |
| policy_executed_fail_count | M | N/A | N/A | N/A | The number of policy executions on the PDP that failed |
response | O | N/A | N/A | N/A | The response to the last operation that the PAP executed on the PDP |
| response_to | M | N/A | N/A | N/A | The PAP to PDP message to which this is a response |
| response_status | M | N/A | N/A | N/A | SUCCESS or FAIL |
| response_message | O | N/A | N/A | N/A | Message giving further information on the successful or failed operation |
YAML is used for illustrative purposes in the examples in this section. JSON (application/json) is used as the content type in the implementation of this API.
Note: The PAP checks that the set of policy types supported in all PDPs in a PDP subgroup are identical and will not add a PDP to a PDP subgroup that has a different set of supported policy types
Note: The PA checks that the set of policy loaded on all PDPs in a PDP subgroup are are identical and will not add a PDP to a PDP subgroup that has a different set of loaded policies
The purpose of this API is for PDPs to provide heartbeat, status. health, and statistical information to Policy Administration. There is a single PDP_STATUS message on this API. PDPs send this message to the PAP using the POLICY_PDP_PAP DMaaP topic. The PAP listens on this topic for messages.
When a PDP starts, it commences periodic sending of PDP_STATUS messages on DMaaP. The PAP receives these messages and acts in whatever manner is appropriate. PDP_UPDATE, PDP_STATE_CHANGE, and PDP_HEALTH_CHECK operations trigger a PDP_STATUS message as a response.
The PDP_STATUS message is used for PDP heartbeat monitoring. A PDP sends a PDP_STATUS message with a state of TERMINATED when it terminates normally. If a PDP_STATUS message is not received from a PDP in a certain configurable time, then the PAP assumes the PDP has failed.
A PDP may be preconfigured with its PDP group, PDP subgroup, and policies. If the PDP group, subgroup, or any policy sent to the PAP in a PDP_STATUS message is unknown to the PAP, the PAP locks the PDP in state PASSIVE.
pdp_status:
name: xacml_1
version: 1.2.3
pdp_type: xacml
state: active
healthy: true
description: XACML PDP running control loop policies
pdp_group: onap.pdpgroup.controlloop.operational
pdp_subgroup: xacml
supported_policy_types:
- onap.policies.controlloop.guard.FrequencyLimiter
- onap.policies.controlloop.guard.BlackList
- onap.policies.controlloop.guard.MinMax
policies:
- onap.policies.controlloop.guard.frequencylimiter.EastRegion:
policy_type: onap.policies.controlloop.guard.FrequencyLimiter
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
- onap.policies.controlloop.guard.blacklist.eastRegion:
policy_type: onap.policies.controlloop.guard.BlackList
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
- onap.policies.controlloop.guard.minmax.eastRegion:
policy_type: onap.policies.controlloop.guard.MinMax
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
instance: xacml_1
deployment_instance_info:
node_address: xacml_1_pod
# Other deployment instance info
statistics:
policy_download_count: 0
policy_download_success_count: 0
policy_download_fail_count: 0
policy_executed_count: 123
policy_executed_success_count: 122
policy_executed_fail_count: 1
pdp_status:
name: drools_2
version: 2.3.4
pdp_type: drools
state: safe
healthy: true
description: Drools PDP running control loop policies
pdp_group: onap.pdpgroup.controlloop.operational
pdp_subgroup: drools
supported_policy_types:
- onap.controllloop.operational.drools.vCPE
- onap.controllloop.operational.drools.vFW
policies:
- onap.controllloop.operational.drools.vcpe.EastRegion:
policy_type: onap.controllloop.operational.drools.vCPE
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
- onap.controllloop.operational.drools.vfw.EastRegion:
policy_type: onap.controllloop.operational.drools.vFW
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
instance: drools_2
deployment_instance_info:
node_address: drools_2_pod
# Other deployment instance info
statistics:
policy_download_count: 3
policy_download_success_count: 3
policy_download_fail_count: 0
policy_executed_count: 123
policy_executed_success_count: 122
policy_executed_fail_count: 1
response:
response_to: PDP_HEALTH_CHECK
response_status: SUCCESS
pdp_status:
name: apex_3
version: 2.2.1
pdp_type: apex
state: test
healthy: true
description: APEX PDP running control loop policies
pdp_group: onap.pdpgroup.controlloop.operational
pdp_subgroup: apex
supported_policy_types:
- onap.controllloop.operational.apex.BBS
- onap.controllloop.operational.apex.SampleDomain
policies:
- onap.controllloop.operational.apex.bbs.EastRegion:
policy_type: onap.controllloop.operational.apex.BBS
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
- onap.controllloop.operational.apex.sampledomain.EastRegion:
policy_type: onap.controllloop.operational.apex.SampleDomain
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
instance: apex_3
deployment_instance_info:node_address
node_address: apex_3_pod
# Other deployment instance info
statistics:
policy_download_count: 2
policy_download_success_count: 2
policy_download_fail_count: 0
policy_executed_count: 123
policy_executed_success_count: 122
policy_executed_fail_count: 1
response:
response_to: PDP_UPDATE
response_status: FAIL
response_message: policies specified in update message incompatible with running policy state
pdp_status:
name: xacml_1
version: 1.2.3
pdp_type: xacml
state: active
healthy: true
description: XACML PDP running monitoring policies
pdp_group: onap.pdpgroup.Monitoring
pdp_subgroup: xacml
supported_policy_types:
- onap.monitoring.cdap.tca.hi.lo.app
policies:
- onap.scaleout.tca:message
policy_type: onap.policies.monitoring.cdap.tca.hi.lo.app
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
instance: xacml_1
deployment_instance_info:
node_address: xacml_1_pod
# Other deployment instance info
statistics:
policy_download_count: 0
policy_download_success_count: 0
policy_download_fail_count: 0
policy_executed_count: 123
policy_executed_success_count: 122
policy_executed_fail_count: 1
The purpose of this API is for the PAP to load and update policies on PDPs and to change the state of PDPs. It also allows the PAP to order health checks to run on PDPs. The PAP sends PDP_UPDATE, PDP_ STATE_CHANGE, and PDP_HEALTH_CHECK messages to PDPs using the POLICY_PAP_PDP DMaaP topic. PDPs listens on this topic for messages.
The PAP can set the scope of STATE_CHANGE, and PDP_HEALTH_CHECK messages:
- PDP Group: If a PDP group is specified in a message, then the PDPs in that PDP group respond to the message and all other PDPs ignore it.
- PDP Group and subgroup: If a PDP group and subgroup are specified in a message, then only the PDPs of that subgroup in the PDP group respond to the message and all other PDPs ignore it.
- Single PDP: If the name of a PDP is specified in a message, then only that PDP responds to the message and all other PDPs ignore it.
Note: PDP_UPDATE messages must be issued individually to PDPs because the PDP_UPDATE operation can change the PDP group to which a PDP belongs.
The PDP_UPDATE operation allows the PAP to modify the PDP group to which a PDP belongs and the policies in a PDP. Only PDPs in state PASSIVE accept this operation. The PAP must change the state of PDPs in state ACTIVE, TEST, or SAFE to state PASSIVE before issuing a PDP_UPDATE operation on a PDP.
The following examples illustrate how the operation is used.
pdp_update:
name: xacml_1
pdp_type: xacml
description: XACML PDP running control loop policies, Upgraded
pdp_group: onap.pdpgroup.controlloop.operational
pdp_subgroup: xacml
policies:
- onap.policies.controlloop.guard.frequencylimiter.EastRegion:
policy_type: onap.policies.controlloop.guard.FrequencyLimiter
policy_type_version: 1.0.1
properties:
# Omitted for brevity, see Section 3.2
- onap.policies.controlloop.guard.blackList.EastRegion:
policy_type: onap.policies.controlloop.guard.BlackList
policy_type_version: 1.0.1
properties:
# Omitted for brevity, see Section 3.2
- onap.policies.controlloop.guard.minmax.EastRegion:
policy_type: onap.policies.controlloop.guard.MinMax
policy_type_version: 1.0.1
properties:
# Omitted for brevity, see Section 3.2
pdp_update:
name: drools_2
pdp_type: drools
description: Drools PDP running control loop policies, extra policy added
pdp_group: onap.pdpgroup.controlloop.operational
pdp_subgroup: drools
policies:
- onap.controllloop.operational.drools.vcpe.EastRegion:
policy_type: onap.controllloop.operational.drools.vCPE
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
- onap.controllloop.operational.drools.vfw.EastRegion:
policy_type: onap.controllloop.operational.drools.vFW
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
- onap.controllloop.operational.drools.vfw.WestRegion:
policy_type: onap.controllloop.operational.drools.vFW
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
pdp_update:
name: apex_3
pdp_type: apex
description: APEX PDP updated to remove a control loop policy
pdp_group: onap.pdpgroup.controlloop.operational
pdp_subgroup: apex
policies:
- onap.controllloop.operational.apex.bbs.EastRegion:
policy_type: onap.controllloop.operational.apex.BBS
policy_type_version: 1.0.0
properties:
# Omitted for brevity, see Section 3.2
The PDP_STATE_CHANGE operation allows the PAP to order state changes on PDPs in PDP groups and subgroups. The following examples illustrate how the operation is used.
pdp_state_change:
state: active
pdp_group: onap.pdpgroup.controlloop.Operational
pdp_subgroup: drools
pdp_state_change:
state: safe
pdp_group: onap.pdpgroup.Monitoring
pdp_state_change:
state: test
name: apex_3
The PDP_HEALTH_CHECK operation allows the PAP to order health checks on PDPs in PDP groups and subgroups. The following examples illustrate how the operation is used.
pdp_health_check:
pdp_group: onap.pdpgroup.controlloop.Operational
pdp_subgroup: drools
pdp_health_check:
pdp_group: onap.pdpgroup.Monitoring
pdp_health_check:
name: apex_3
The policy Framework must have implementations for all Policy Type entities that may be specified in TOSCA. Policy type implementations are native policies for the various PDPs supported in the Policy Framework. They may be predefined and preloaded into the Policy Framework. In addition, they may also be added, modified, queried, or deleted using this API during runtime.
The API supports CRUD of PolicyTypeImpl policy type implementations, where the XACML, Drools, and APEX policy type implementations are supplied as strings. This API is provided by the PolicyDevelopment component of the Policy Framework, see The ONAP Policy Framework architecture.
Note that client-side editing support for TOSCA PolicyType definitions or for PolicyTypeImpl implementations in XACML, Drools, or APEX is outside the current scope of the API.
Note: Preloaded policy type implementations may only be queried over this API, modification or deletion of preloaded policy type implementations is disabled.
Note: Policy type implementations that are in use (referenced by defined Policies) may not be deleted.
The fields below are valid on API calls:
Field | GET | POST | DELETE | Comment |
---|
name | M | M | M | The name of the Policy Type implementation |
version | O | M | C | The version of the Policy Type implementation |
policy_type | R | M | N/A | The TOSCA policy type that this policy type implementation implements |
pdp_type | R | M | N/A | The PDP type of this policy type implementation, currently xacml, drools, or apex |
description | R | O | N/A | The description of the policy type implementation |
writable | R | N/A | N/A | Writable flag, false for predefined policy type implementations, true for policy type implementations defined over the API |
policy_body | R | M | N/A | The body (source) of the policy type implementation |
properties | R | O | N/A | Specific properties for the policy type implementation |
This operation allows the PDP groups and subgroups to be listed together with the policies that are deployed on each PDP group and subgroup.
https:{url}:{port}/policy/api/v1/native/onap.policies.controlloop.operational/impls GET
policy_type_impls:
- name: onap.policies.controlloop.operational.drools.Impl
version: 1.0.0
policy_type: onap.policies.controlloop.Operational
pdp_type: drools
description: Implementation of the drools control loop policies
writable: false
- name: onap.policies.controlloop.operational.apex.bbs.Impl
version: 1.0.0
policy_type: onap.policies.controlloop.operational.Apex
pdp_type: apex
description: Implementation of the APEX BBS control loop policy
writable: true
policy_body: "<policy body>"
- name: onap.policies.controlloop.operational.apex.sampledomain.Impl
version: 1.0.0
policy_type: onap.policies.controlloop.operational.Apex
pdp_type: apex
description: Implementation of the SampleDomain test APEX policy
writable: true
policy_body: "<policy body>"
The table below shows some more examples of GET operations
Example | Description |
---|
https:{url}:{port}/policy/api/v1/native/{policy type id}/impls eg. https:{url}:{port}/policy/api/v1/native/onap.policies.monitoring/impls https:{url}:{port}/policy/api/v1/native/onap.policies.controlloop.operational.apex/impls | Get all Policy Type implementations for the given policy type |
https:{url}:{port}/policy/api/v1/native/{policy type id}/impls/{policy type impl id} eg. https:{url}:{port}/policy/api/v1/native/onap.policies.controlloop.operational/impls/onap.policies.controlloop.operational.drools.impl https:{url}:{port}/policy/api/v1/native/onap.policies.controlloop.operational.apex/impls/onap.policies.controlloop.operational.apex.sampledomain.impl | Get all Policy Type implementation versions that match the policy type and policy type implementation IDs specified |
https:{url}:{port}/policy/api/v1/native/{policy type id}/impls/{policy type impl id}/versions/{version id} eg. https:{url}:{port}/policy/api/v1/native/onap.policies.controlloop.operational/impls/onap.policies.controlloop.operational.drools.impl/versions/1.2.3 https:{url}:{port}/policy/api/v1/native/onap.policies.controlloop.operational.apex/impls/onap.policies.controlloop.operational.apex.sampledomain.impl/versions/latest | Get the specific Policy Type implementation with the specified name and version, if the version ID is specified a latest, the latest version is returned |
The API allows users (such as a policy editor or DevOps system) to create or update a Policy Type implementation using a POST operation. This API allows new Policy Type implementations to be created or existing Policy Type implementations to be modified. POST operations with a new name or a new version of an existing name are used to create a new Policy Type implementation. POST operations with an existing name and version are used to update an existing Policy Type implementations. Many implementations can be created or updated in a single POST operation by specifying more than one Policy Type implementation on the policy_type_impls list.
For example, the POST operation below with the YAML body below is used to create a new APEX Policy type implementation.
https:{url}:{port}/policy/api/v1/native/onap.policies.controlloop.operational.apex/impls POST
policy_type_impls:
- onap.policies.controlloop.operational.apex.bbs.Impl:
version: 1.0.0
policy_type: onap.policies.controlloop.operational.Apex
pdp_type: apex
description: Implementation of the APEX BBS control loop policy
policy_body: "<policy body>"
- onap.policies.controlloop.operational.apex.sampledomain.Impl:
version: 1.0.0
policy_type: onap.policies.controlloop.operational.Apex
pdp_type: apex
description: Implementation of the APEX SampleDomain control loop policy
policy_body: "<policy body>
Once this call is made, the Policy Type query in Section 3.1.2.1 returns a result with the new Policy Type implementation defined.
The API also allows Policy Type implementations to be deleted with a DELETE operation. The format of the delete operation is as below:
https:{url}:{port}/api/v1/native/onap.policies.controlloop.operational.apex/impls/onap.policies.apex.bbs.impl/versions/1.0.0 DELETE
Note: Predefined policy type implementations cannot be deleted
Note: Policy type implementations that are in use (Parameterized by a TOSCA Policy) may not be deleted, the parameterizing TOSCA policies must be deleted first
Note: The version parameter may be omitted on the DELETE operation if there is only one version of the policy type implementation in the system