Before starting to make sure you have a working development environment.
You can follow the Setting Up Your Development Environment Page.
Table Of Contents:
The computer must have the following software packages installed:
Create a sdc folder and run the following command
git clone http://gerrit.onap.org/r/sdc |
Ensure Maven settings.xml contains ONAP and OpenDaylight nexus repositories. See Setting Up Your Development Environment#MavenExamplesettings.xml |
Now all you need to is to build the project:
cd c:\dvlp\sdc mvn clean install |
SDC is deployed using a HEAT template that bootstraps a VM machine on the Rackspace cloud. Assuming that the deployment runs as expected then the following System setup, prerequisites and requirements should automatically be put in place.
This document describes the manual processes required to perform any one of the automated steps, if the deployment did not run to completion as expected.
The document deals with several key topics:
Operating system requirements
SDC application requirements
The manual system setup consists of :
Installing the Docker service
Check Ubuntu uname:
uname -r
The output needs to be grater then 3.13.0-91-generic:
For example: root@vm1-asdc:/data# uname -r 4.4.0-51-generic |
Install the Docker service:
A. Login to the new machine as root and run:
apt-get update apt-get install apt-transport-https ca-certificates (Press Y) apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D echo "deb https://apt.dockerproject.org/repo ubuntu-trusty main" | tee /etc/apt/sources.list.d/docker.list apt-get update apt-cache policy docker-engine apt-get -y install linux-image-extra-$(uname -r) linux-image-extra-virtual apt-get -y install docker-engine service docker start |
B. Verify that Java is installed:
java -version
C. If Java is not installed then run:
apt-get install default-jre apt-get update |
A system restart is required; reboot the server.
Updating Ubuntu to the latest version available on the Rackspace repository
Login to the Rackspace server:
The output for a successful login will be displayed; check the version, for example:
Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.4.0-51-generic x86_64) |
Upgrade UBUNTU (only if version is below 16.04.1 LTS):
Run: do-release-upgrade (press y, press enter twice, y, select “install the package maintainer's version”, y, y - for reboot)
this will update Ubuntu from 14.04.1 LTS to 16.04.1 LTS |
Allocating a volume for data
vi /etc/fstab, add this line:
/dev/xvdb1 /data ext4 errors=remount-ro,noatime,barrier=0 0 1 |
Check that the volume is mounted:
df -h | grep data |
The expected result should be in the form:
/dev/xvdb1 99G 528M 93G 1% /data |
Set connection to Docker hub repository
This section deals with connecting to the OpenECOMP SDC Docker repository and checking that the Docker Service is up and running.
To set the connection to the Docker hub repository:
This section runs a script to start the Dockers and boot the system. The script takes the latest Dockers from the Docker repository. The boot process takes approximately 1 minute.
Starting the SDC application
The SDC application is executed using several Dockers
To start the dockers:
Run the script in the format usage as described:
Usage: /data/scripts/docker_run.sh -e <environment name> -r <release> -p <docker-hub-port>
Note: the use of spaces and dashes in the script format is mandatory. |
Example usage as for the Orange environment:
/data/scripts/docker_run.sh -e Orange -r 1610.2.12 -p 51220 |
A Health check to verify that OpenECOMP SDC is up and running is conducted as part of the docker_run.sh script. The expected output would look similar to that provided:
root@vm1-asdc:~# /data/scripts/docker_health.sh
{
"cluster_name" : "ASDC-ES-OS-ETE-DFW",
"status" : "green",
"timed_out" : false,
"number_of_nodes" : 1,
"number_of_data_nodes" : 1,
"active_primary_shards" : 1,
"active_shards" : 1,
"relocating_shards" : 0,
"initializing_shards" : 0,
"unassigned_shards" : 0,
"delayed_unassigned_shards" : 0,
"number_of_pending_tasks" : 0,
"number_of_in_flight_fetch" : 0,
"task_max_waiting_in_queue_millis" : 0,
"active_shards_percent_as_number" : 100.0
}
BE health-Check:
{
"sdcVersion": "1610.2.12",
"siteMode": "unknown",
"componentsInfo": [
{
"healthCheckComponent": "BE",
"healthCheckStatus": "UP",
"version": "1610.2.12",
"description": "OK"
},
{
"healthCheckComponent": "ES",
"healthCheckStatus": "UP",
"description": "OK"
},
{
"healthCheckComponent": "TITAN",
"healthCheckStatus": "UP",
"description": "OK"
},
{
"healthCheckComponent": "DE",
"healthCheckStatus": "UP",
"description": "OK"
}
]
}
FE health-Check:
{
"sdcVersion": "1610.2.12",
"siteMode": "unknown",
"componentsInfo": [
{
"healthCheckComponent": "BE",
"healthCheckStatus": "UP",
"version": "1610.2.12",
"description": "OK"
},
{
"healthCheckComponent": "ES",
"healthCheckStatus": "UP",
"description": "OK"
},
{
"healthCheckComponent": "TITAN",
"healthCheckStatus": "UP",
"description": "OK"
},
{
"healthCheckComponent": "DE",
"healthCheckStatus": "UP",
"description": "OK"
},
{
"healthCheckComponent": "FE",
"healthCheckStatus": "UP",
"version": "1610.2.12",
"description": "OK"
}
]
}
[{"firstName":"Carlos","lastName":"Santana","userId":"cs0008","email":"designer@sdc.com","role":"DESIGNER","lastLoginTime":1483900163928,"status":"ACTIVE","fullName":"Carlos Santana"}] |
This section describes the process for creating an SDC consumer that allows OpenECOMP components to communicate with SDC.
Creating SDC consumers
In order to integrate with other OpenECOMP components, consumers are configured per component. This operation is performed as an integral part of executing the Backend Docker.
The following users are predefined:
For the purposes of this document, the manual consumer configuration process is described.
To create new SDC consumers:
Run the following commands from the Docker, providing consumer specific values for the parameters that are inside <>:
Consumers creation, Run From Docker (Change the marked in yellow):
consumerName=<Consumer user name> (For example: appc )
user_pass=<Consumer password> (For example: appcos )
IP=localhost <OR Docker IP>
enc_pass=`java -cp /tmp/security-utils-*.jar org.openecomp.sdc.security.Passwords $user_pass |tr '[]' ' '|awk '{print $1}'`
salt=`echo $enc_pass |awk -F: '{print $1}'
pass=`echo $enc_pass |awk -F: '{print $2}'
curl -X POST -i -H "Accept: application/json; charset=UTF-8" -H "Content-Type: application/json" -H "USER_ID: jh0003" http://$IP:8080/sdc2/rest/v1/consumers/ -d '{"consumerName": '$consumerName', "consumerSalt": '$salt',"consumerPassword": '$pass'}' |
Note: Repeat the consumer creation process for each consumer, providing Consumer specific consumerName and user_pass |
For Eample:
consumerName=appc
user_pass=appcos
enc_pass=`java -cp /tmp/security-utils-1702.0.11.jar org.openecomp.sdc.security.Passwords $user_pass |tr '[]' ' '|awk '{print $1}'`
salt=`echo $enc_pass |awk -F: '{print $1}'`
pass=`echo $enc_pass |awk -F: '{print $2}'`
curl -X POST -i -H "Accept: application/json; charset=UTF-8" -H "Content-Type: application/json" -H "USER_ID: jh0003" http://localhost:8080/sdc2/rest/v1/consumers/ -d '{"consumerName": '$consumerName', "consumerSalt": '$salt',"consumerPassword": '$pass'}' |
Check that the consumer was successfully created in SDC:
curl -X GET -i -H "Accept: application/json; charset=UTF-8" -H "Content-Type: application/json" -H "USER_ID: jh0003" http://localhost:8080/sdc2/rest/v1/consumers/<consumerName>
HTTP/1.1 200 OK
Set-Cookie: JSESSIONID=1ahpyqpjjgfblahos4f03qun9;Path=/
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Content-Type: application/json;charset=UTF-8
X-ECOMP-RequestID: 6e47cbde-44e8-4b82-8f17-c6a731bf0081
Vary: Accept-Encoding, User-Agent
Content-Length: 268
Server: Jetty(9.3.12.v20160915)
{"consumerName":"vid","consumerPassword":"3936abc03d50693c90ec68a4a60427d6bdde8b085d60314333c9e58a270ff6f3","consumerSalt":"eaa62d9681d8f803ac05db342e3c9cc0","consumerLastAuthenticationTime":0,"consumerDetailsLastupdatedtime":1481211500749,"lastModfierAtuid":"jh0003"} |