View Source

This page mainly describes the template design steps of option1 for the E2E Network Slicing use case for Guilin release.

Template design for Option1 is as folllows:

Developer Wiki > Template Design for Option 1 > Option1_templates_design.PNG

Sample Service Templates for Option 1:

Create Service Category

Login SDC HOME page with Admin Role，create the following categories:

CST，ServiceProfile，AN SliceProfile，AN NF Slice Profile, CN SliceProfile，TN SliceProfile，NST， TN BH NSST, TN MH NSST, TN FH NSST, TN Network Requirement，AN NF NSST，CN NSST, AN NSST.

1.Create CN_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'CN_NSST' as the name to indicate the meaning of the service.
Select ‘CN NSST’ as Category.
Provide 'ONAP_internal' as Service Role

2. NSST should be composed of network service(NS). For NS helm artifacts, CBA package and other design time activities, please follow below link:

https://wiki.onap.org/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS

E2E Network Slicing Meeting Notes for Oct 12, 2020 – Design Time Demo (32:00 - 58:00)

3. In Composition section, drag the elements of ‘Fiveg’(NS) from the Elements palette to the service canvas.

4. In Properties Assignment section,define Service properties.

a. Click

b. Input name and select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

c. Set property values as shown bellow.

Developer Wiki > Template Design for Option 1 > image2021-1-13_19-56-53.png

5. Distribute the service model and check the results.

2.Create TN_Network_Req_T

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'TN_Network_Req_T' as the name to indicate the meaning of the service.
Select ‘TN Network Requirement’ as Category.
Provide 'ONAP_internal' as Service Role

2. In Properties Assignment section, define the following service properties.

Developer Wiki > Template Design for Option 1 > image2021-1-13_15-46-44.png

3. Distribute the service model and check the results.

3.Create TN_Network_Req_AR（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

Suggest 'TN_Network_Req_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

Developer Wiki > Template Design for Option 1 > image2021-1-13_16-4-4.png

4.Create TN_BH_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'TN_BH_NSST' as the name to indicate the meaning of the service.
Select ‘TN BH NSST’ as Category.
Provide 'ONAP_internal' as Service Role

2. In Composition section，search 'TN_Network_Req_AR', drag the element from the Elements palette to the service canvas.

3.In Properties Assignment section, define the following service properties.

Developer Wiki > Template Design for Option 1 > image2021-1-13_17-53-28.png

4. Distribute the service model and check the results.

5.Create TN_FH_AR（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

Suggest 'TN_FH_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

Developer Wiki > Template Design for Option 1 > image2021-1-13_16-4-4.png

6.Create TN_MH_AR（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

Suggest 'TN_MH_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

Developer Wiki > Template Design for Option 1 > image2021-1-13_16-4-4.png

7.Create TN_MH_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'TN_MH_NSST' as the name to indicate the meaning of the service.
Select ‘TN MH NSST’ as Category.
Provide 'TRANSPORT' as Service Type.
Provide 'TN_MH' as Service Role.

2. In Composition section，search 'TN_MH_AR', drag the element from the Elements palette to the service canvas.

8.Create TN_FH_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'TN_FH_NSST' as the name to indicate the meaning of the service.
Select ‘TN FH NSST’ as Category.
Provide 'TRANSPORT' as Service Type.
Provide 'TN_FH' as Service Role.

2. In Composition section，search 'TN_FH_AR', drag the element from the Elements palette to the service canvas.

9.Create NrtRIC_resource

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

Suggest 'NrtRIC_resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name.
Provide '1' as Vendor Release.

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

Rename ExtCP2 as 'EP_E2'.

10.Create CUCP_Resource

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

Suggest 'CUCP_Resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name
Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

Rename ExtCP2 as 'EP_NG_c'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.

11.Create CUUP_Resource

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

Suggest 'CUUP_Resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name
Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

Rename ExtCP2 as 'EP_NG_u'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.

12.Create DU_Resource

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

Suggest 'DU_Resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name
Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

Rename ExtCP2 as 'EP_E2'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FH'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.

13.Create RAN_NF Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'RAN_NF_NSST' as the name to indicate the meaning of the service.
Select ‘AN NF NSST’ as Category.
Provide 'RAN' as Service Type.
Provide 'AN_NF' as Service Role.

2. In Composition section，drag the elements of ‘NrtRIC_resource’，‘CUCP_Resource’，‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click

b. Input name and select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

Developer Wiki > Template Design for Option 1 > image2021-1-13_19-32-29.png

4. Distribute the service model and check the results.

14.Create TESTRANTOPNSST(TOP RAN Service Template)

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'TESTRANTOPNSST' as the name to indicate the meaning of the service.
Select ‘AN NSST’ as Category.
Provide 'RAN' as Service Type.
Provide 'ONAP_internal' as Service Role.

2. In Composition section，drag the elements of ‘RAN_NF_NSST’，‘TN_MH_NSST’，‘TN_FH_NSST’ from the Elements palette to the service canvas.

3.In Properties Assignment section,define Service properties.

a. Click

b. Input name and select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

Developer Wiki > Template Design for Option 1 > image2021-1-13_19-32-29.png

4. Distribute the service model and check the results.

15.Create CN_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of CN_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

16.Create Tn_BH_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_BH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

17.Create AN_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TESTRANTOPNSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

18.Create NSTO1 Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'NSTO1' as the name to indicate the meaning of the service.
Select ‘NST’ as Category.
Suggest 'ONAP_internal' as Service Role

2. In Composition section，drag the elements of ‘AN_AR’，‘Tn_BH_AR’，‘CN_AR’ from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click

Add the property "latency" as a separate property of type integer and provide the value as 45

Set property values as shown bellow.

Developer Wiki > Template Design for Option 1 > image2021-1-14_0-23-35.png

4. Distribute the service model and check the results.

19.Create Slice_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

Suggest 'Slice_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Select 'providing_service_invariant_uuid' and 'providing_service_uuid' and click Declare Input.

Developer Wiki > Template Design for Option 1 > image2021-1-14_0-30-54.png

20.Create TN_SliceProfile Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'TN_SliceProfile' as the name to indicate the meaning of the service.
Select ‘TN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Add some properties as the picture shown bellow.

Developer Wiki > Template Design for Option 1 > image2021-1-14_10-15-35.png

b. Select all properties and click Declare Input.

c. Click 'Slice_AR 0'in the right pane

d. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

21.Create CN_SliceProfile Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'CN_SliceProfile' as the name to indicate the meaning of the service.
Select ‘CN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. Properties Assignment section, define Service properties.

a. Click

b. Input name and select ‘org.openecomp.datatypes.SliceProfile’ as type.

c. Add some properties as shown bellow.

Developer Wiki > Template Design for Option 1 > image2021-1-14_20-9-15.png

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

22.Create SliceProfile_AN_NF_O1 Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'SliceProfile_AN_NF_O1' as the name to indicate the meaning of the service.
Select ‘AN NF SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click

b. Input name and select ‘org.openecomp.datatypes.SliceProfile’ as type.

c. Add some properties as shown bellow.

Developer Wiki > Template Design for Option 1 > image2021-1-14_10-3-47.png

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

Developer Wiki > Template Design for Option 1 > image2021-1-14_17-5-25.png

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

Developer Wiki > Template Design for Option 1 > image2021-1-14_20-2-38.png

4. Distribute the service model and check the results.

23.Create SliceProfile_AN_O1 Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'SliceProfile_AN_O1' as the name to indicate the meaning of the service.
Select ‘AN SliceProfile’ as Category.

2. In Composition section，drag the elements of ‘SliceProfile_AN_NF_O1’，‘TN_SliceProfile’ from the Elements palette to the service canvas.

24.Create ServiceProfile_O1 Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'ServiceProfile_O1' as the name to indicate the meaning of the service.
Select ‘ServiceProfile’ as Category.

2. In Composition section，search 'Slice_AR', ’SliceProfile_CN‘，‘SliceProfile_AN_O1’，‘SliceProfile_TN’，drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click

b. Input name and select ‘org.openecomp.datatypes.ServiceProfile’ as type.

c. Select some attributes of ServiceProfile as bellow picture shows and click Declare Input .

Developer Wiki > Template Design for Option 1 > image2021-1-14_17-46-23.png

d. Add input for activityFactor param with a value(i.e. 20)

4. Distribute the service model and check the results.

25.Create CST_O1 Service Template

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

Suggest 'CST_O1' as the name to indicate the meaning of the service.
Select ‘CST’ as Category.
Fill in the "Service Type" field with the value "embb"

2. In Composition section，search 'ServiceProfile_O1', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click

b. Input name and select ‘org.openecomp.datatypes.CSProperties’ as type.

c. Select all attributes of ServiceProfile except 'sNSSAI' and click Declare Input .

Developer Wiki > Template Design for Option 1 > image2021-1-14_17-57-45.png

4. Distribute the service model and check the results.

A&AI Configuration:

If the service distribution to A&AI failed, like the picture shows bellow：

Developer Wiki > Template Design for Option 1 > image2020-5-18_15-59-31.png

Add 'ServiceProfile' and 'NSTAR' model to A&AI through postman.(ServiceProfile/NSTAR Model Id and Invariant Id can be find on SDC page.)

model-invariant-id is SERVICE_INVARIANT_ID
model-version-id is SERVICE_MODEL_UUID
model-type is SERVICE_TYPE
model-name is SERVICE_NAME

curl --user AAI:AAI -X PUT -H "X-FromAppId:AAI" -H "X-TransactionId:get_aai_subscr" -H "Accept:application/json" -H "Content-Type:application/json" -k "https://{worker-vm-ip}:30233/aai/v21/service-design-and-creation/models/model/bfd35bbf-4469-44d2-aa13-eb531b2d4e7a" -d '{
"model-invariant-id": "bfd35bbf-4469-44d2-aa13-eb531b2d4e7a",
"model-type": "Service",
"model-vers": {
"model-ver": [
{
"model-version-id": "fd4ca61e-2147-4693-ad2c-2786889b51a5",
"model-name": "NSTO1",
"model-version": "1.0"
}
]
}
}'

NOTE: If any service template composed of Allotted Resource(AR) fails to distribute in AAI, then add created Allotted Resource Configuration to AAI as given above.