...
Description | Notes | Decision | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1 | Priority of async calls | In Istanbul, async calls are required only in pass-through cases. NCMP does not have to handle these requests | |||||||||
2 | Will we use the data node wrapper on GET rest operations? | Currently, we wrap the response of GET operations using the data node wrapper. | we should mainly support yang-data/json controlled by "accept-header" | ||||||||
3 | In the URI will we distinguish between data and operations (RFC calls) as part of the path? | e.g. http://localhost:8080/ncmp/v1/data http://localhost:8080/ncmp/v1/operation | This only applies to pass-through yes, we will distinguish between data and operation | ||||||||
4 | Which query parameters will NCMP support? | Parent data resource identifier can handle any path using the same query parameter
| |||||||||
5 | Yml should include return types and examples of the payload | Legacy and new API documentation needs to include output examples. Task created, see
| |||||||||
6 | camel case or dash in URI | We will use a dash for param names e.g. cm-handle (although it has since been agreed we use 'ch' in this particular case) | |||||||||
7 | Insert /resource-path in front of the resource path to prevent ambiguous paths | <OP>/ncmp/<v{v-number}>/ch/<cm-handle>/<data|operations|{ncmp-operation}>/ds/{datastore}/[rp:]{resource-path}?{query} | Optionally insert the resource path ('rp:') if it clashes with the current | ||||||||
8 | Granularity of update scenarios (and priority) |
| Priority is pass-through only so it depends on the RETSConf protocol that is supported. In Jakarta or if required by other projects more fine-grained 'operation' datastore update options can be implemented | ||||||||
9 | Fallback option for datastore in release I | No, explicit datastore options will be used in Istanbul | |||||||||
10 | fields is a rest conf option, investigate is it fully supported by onap | Supported in pass-through for ONAP DMI plugin but depending on the support by the actual target. The intention is to increase support 'fields' in future requirements following RFC-8040 for operational datastore etc. | |||||||||
11 | Agree on URI syntax | Proposed syntax by CPS team <OP>/ncmp/<v{v-number}>/ch/<cm-handle>/<data|operations|{ncmp-operation}>/ds/{datastore}/[rp:]{resource-path}?{query} | review completed and proposed URI agreed | ||||||||
12 | Will we combine query capabilities with update capabilities? | We have decided not to combine query capabilities with update capabilities | |||||||||
13 | Description of header limitations | HTTP Header Limitations LIMITATION NOTE: server implementations put size limits on the headers meaning header contents should be designed carefully : | |||||||||
14 | Will NCMP support paths for pass-through:running | The plugin will not do transformation or validation of paths in the case of pass-through:running | |||||||||
15 | Specification of path per cm handle | DMI Plugin can take cps paths or restconf paths and it needs to specify that per cm handle when cm handle is created | |||||||||
16 | What is the default path for NCMP | In NCMP default will always be cps path and depending on the adapter we can change it as needed per cm handle | |||||||||
17 | Fields parameter for ncmp/operational? | The fields parameter is ignored in ncmp/operational (in Istanbul release) | |||||||||
18 | Is specifying the datastore mandatory? | Datastore is mandatory in Istanbul release | |||||||||
19 | Register a DMI plugin with NCMP | DMI plugin is a part of cm handle registration. The rest endpoint on NCMP can be multiple calls | |||||||||
20 | Retrieve list of modules (names) for a cmHandle | Retrieve a list of module names for cm handle - this will be used by ncmp to get the models. - assuming ncmp model discovery is complete and it is stored in cps core, this will come from cached information | |||||||||
21 | Where will sync be implemented? | Implement sync in the dmi plugin and then have ncmp be able to pass on the request. This is not a bulk operation | |||||||||
22 | Config-true only support (filter out config-false data) | Use datastore 'running' to select this but filtering not supported in I for cached data | |||||||||
23 | Enable NCMP to convert cpsPath to mutliple options(RESTConf, netConf, leave as cpsPath) | When other DMI-Plugins are realized they might need a different conversion then the default from cspPath to RESTConf. This could be configured by using a known property for each cm-handle | Not required in Istanbul. But DB model can easily be updated to cater for this when needed | ||||||||
24 | Datastore conversion in NCMP or DMI-Plugin | DMI-Plugin will know best how to convert. This will also reduce future impacts on NCMP for new options. | NCMP will do now conversion of datastore names | ||||||||
25 | What datastore/s (name/s) is/are supported by NCMP to referred to the cached data. 'Operational' or 'running' | 'operational' would imply RO and config=false data is included. 'To also support 'running' using the same data a filter would have to be applied | see supported datastore in I : Datastores103416823 | ||||||||
26 | Consider fallback option when user specifies ncmp/operational but data is NOT synced | NCMP will forward requests for un-synced cmHandles to the DMI Plugin (Including required transformation of resource path etc.) | |||||||||
27 | Support for &fields parameter when using cached data |
| &Fields parameter will be ignored for 'cached' data in Istanbul timeframe long term expectation is to have support following RESTConf/ODL behavior as much as possible | ||||||||
28 | Support for &fields parameter when forwarding to plugin for non-synced cmHandles |
| A spike
|
...
# | Req/usecase | REST Method | URI / Payload | Request/Response Example | Status | Release I | ||||
---|---|---|---|---|---|---|---|---|---|---|
1 | Async read of a data resource getting | GET | {ncmp-root}/ncmp/v1/ch/<cm-handle>/{dataresource-identifier}?fields={fields}&topic={topicId} Note 'topic' and 'fields' are only supported in passthrough mode at this time (ONAP Release I). If not passthrough then an exception is thrown from NCMP at this time. | Scenario : Read the GNBCUCPFunction for cm-handle "335ff" as passthrough Method : GET URI : {ncmp-root}/ncmp/v1/data/ch/335ff/data/ds/GNBCUCPFunction?fields=pLMNId;gNBId;gNBIdLength;syncStatus&topic=anr-app:anr24234234:v2 OR {ncmp-root}/ncmp/v1/data/ch/335ff/data/ds/ncmp-datastores:passthrough-running?fields=_3gpp-common-managed-element:ManagedElement/_3gpp-nr-nrm-gnbcucpfunction:GNBCUCPFunction(pLMNId;gNBId;gNBIdLength)&topic=anr-app:anr24234234:v2 Header : Response : Event Response: { | passthrough-running is supported in Istanbul using
Note 'topic' and 'fields' are only supported in passthrough mode at this time (ONAP Release I). If not passthrough then an exception is thrown from NCMP at this time. Always return the yang-data+json in the "data" event payload | yes | ||||
2 | Read of a data resource getting specific | GET | {ncmp-root}/ncmp/v1/data/ch/<cm-handlehandle>/data/{data-resource-identifier}?fields={fields} | Scenario : Method: GET URI : {ncmp-root}/ncmp/v1/data/ch/335ff/data Header : Response: HTTP/1.1 200 OK | passthrough-running is supported in Istanbul using
| |||||
3 | Read a data resource directly from Synchronous call | GET | {ncmp-root}/ncmp/v1/data/ch/{data-resource-identifier}?fields={fields} Accept: application/yang-data+json | Scenario : Read the Method : GET URI :{ncmp-root}/ncmp/v1/data/ch/335ff/data Header : Response: HTTP/1.1 200 OK { | passthrough-running is supported in Istanbul using
| Yes | ||||
4 | Create a data resource for a cmhandle | POST | cmp-root}/ncmp/v1/data/ch/<cm-handle>/data/{parent-data-resource-identifier} { | Scenario : Create Method : POST URI : {ncmp-root}/ncmp/v1/data/ch/34l5k32/data/ Header : Body : | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul | |||||
5 | Update a data resource for a cmhandle with plain-patch update | PATCH | {ncmp-root}/ncmp/v1/data/ch/<cmhandle>/data/{data-resource-identifier} { Content: application/yang-data+json Behaves as a merge - merge with existing if it exists or create if it does not exist. | Scenario : Method : PATCH URI :{ncmp-root}/ncmp/v1/data/ch/34l5k32/data/ Header : Body : { NOTE : If not passthrough then ALL attributes MUST be supplied for the patch at this time. Otherwise, other attributes are removed from CPS. | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul this will be treated as a merge | |||||
6 | Update a data resource with multiple edits for a cmhandle with yang-patch update | PATCH | {ncmp-root}/ncmp/v1/data/ch/<cm-handle>/data/{data-resource-identifier} { Content: application/yang-data+json If using yang-patch content then ds/ncmp-datastore-passthrough-running mus be used by rad apps until full | Scenario : Update _3gpp-common-managed-element:ManagedElement=Kista-001/_3gpp-nr-nrm-gnbdufunction:GNBDUFunction=1 with multiple operations on the tree Method : PATCH Header : Body : { | ||||||
7 | Delete a data resource for a cmhandle | DELETE | {ncmp-root}/ncmp/v1/data/ch/<cm-handle>/data/{data-resource-identifier} | Scenario: Delete Method : DELETE URI : {ncmp-root}/ncmp/v1/data/ch/34l5k32/data/ | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul for delete | |||||
8 | Get all cmhandles that support a given module | GET | {ncmp-root}/ncmp/v1/data/ch?module={module-name} Content: application/json | Scenario : Get the all cmhandles that support a given module Response: | ||||||
9 | Get model info for CMHandle | GET | {ncmp-root}/ncmp/v1/data/ch/{cm-handle}/data/ietf-yang-library:modules-set | Scenario : Get the model data for CMHandle Method : GET URI :{ncmp-root}/ncmp/v1/data/ch/2334dedf/data/ietf-yang-library:modules-set Header : Response: { | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul for delete | |||||
10 | Execute a yang action | POST | {ncmp-root}/ncmp/v1/data/ch/<cm-handle>/data/ds/ncmp-datastores:passthrough-running/{data-resource-identifier}/{action} Note : If the "action" statement | Method : POST URI : {ncmp-root}/ncmp/v1/data/ch/3445fff/data/ds/ncmp-datastores:passthrough-operational/ Header : Body : | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul | |||||
11 | Execute an rpc operation | POST | {ncmp-root}/ncmp/v1/operations/ch//operations /ds/ncmp-datastores :passthrough-operational/{module-name}:{action} { Note : If there is no "input" | Method : POST URI : {ncmp-root}/ncmp/v1/operations/ch/3445fff/ds/ncmp-datastores:passthrough-operational/_3gpp-common-managed-element:resetDevice (dummy action) Header : Body : Response : | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul | |||||
12 | Read descendant data resources with | GET | {ncmp-root}/ncmp/v1/ch/<cm-handle>/{data-resource-identifier}?fields={fields-expression} options
| Scenario : Read all NRCellDU MOs with attributes userLabel and id under the _3gpp-nr-nrm-gnbdufunction:GNBDUFunction MO Method : GET URI :{ncmp-root}/ncmp/v1/data/ch/3445fff/data/ManagedElement[@id=Kista-001] Header : Response : HTTP/1.1 200 OK { _3gpp-nr-nrm-nrcelldu:NRCellDU=1 { _3gpp-nr-nrm-nrcelldu:NRCellDU=4 { _3gpp-nr-nrm-nrcelldu:NRCellDU=5 { | passthrough-running is supported in Istanbul using
| |||||
13 | Read data resources to a given depth | POST | {ncmp-root}/ncmp/v1/ch/<cm-handle>{data-resource-identifier}?depth={level}
| Method : POST URI : {ncmp-root}/ncmp/v1/ch/3445fff/ManagedElement[@id=Kista-001]/GNBDUFunction[@id=1]?depth=4 Header : Body: Response : HTTP/1.1 200 OK _3gpp-nr-nrm-nrsectorcarrier: _3gpp-nr-nrm-nrsectorcarrier:NRSectorCarrier=3{ _3gpp-nr-nrm-nrsectorcarrier:NRSectorCarrier=4 { _3gpp-nr-nrm-nrcelldu:NRCellDU=1 { _3gpp-nr-nrm-nrcelldu:NRCellDU=4 { _3gpp-nr-nrm-nrcelldu:NRCellDU=5 { | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul | |||||
14 | Replace a data resource for a cmhandle | PUT | ncmp-root}/ncmp/v1/data/ch/<cm-handle>/data/{data-resource-identifier} { <yang-data-resource-identifier> } | Scenario : Replace _3gpp-nr-nrm-nrsectorcarrier:NRSectorCarrier=4 txDirection Method : PUT URI : {ncmp-root}/ncmp/v1/data/ch/34l5k32/data/ManagedElement[@id=Kista-001] Header : Body : { | passthrough-running is supported in Istanbul using
ncmp-datastores:running is not supported in Istanbul | |||||
15 | Async Requests | GET/ POST/ PATCH /PUT/ DELETE | {ncmp-root}/ncmp/v1/ch/<cmhandle>/data/ds/ncmp-datastores:passthrough-running/ {xpath}?topic=<dmaap-topic-Identifier> **Async communication channel is DMaaP Immediate response with a requestId is sent to the caller and the CRUD request is executed asynchronously where data is returned via the provided topic identifier. | Scenario : Async request to NCMP Method : GET/POST/PATCH/PUT/DELETE URI : {ncmp-root}/ncmp/v1/data/ch/de3455/data/ManagedElement[@id=Kista-001]/GNBDUFunction[@id=1]?topic=5G:SectorCarrierOrchestrator-0012391:12 Body : // Include body where required Response : response data is published on the topic identified by <topicIdentifier> keyed on request. Event Successful Reponse : |
...