...

{
  "description": "Application configuration",
  "config": {    
    "controller": [
      {
        "name": "controller1",
        "baseUrl": "http://sdnc_controller:8181",
        "userName": "admin",
        "password": "Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U"
      }
    ],
    "ric": [
      {
        "name": "ric1",
        "baseUrl": "http://ric1:8085/", 
        "managedElementIds": [
        ]
      },
      {
        "name": "ric2",
        "baseUrl": "http://ric2:8085/",       
        "managedElementIds": [
          "kista_3",
          "kista_4"
        ]
      },
       {
        "name": "ric3",
        "baseUrl": "http://ric3:8085/",
        "controller": "controller1", 
        "managedElementIds": [
          "kista_5",
          "kista_6"
        ]
      },
       {
        "name": "ric4",
        "baseUrl": "http://ric4:8085/",
        "controller": "controller1", 
        "managedElementIds": [
          "kista_7",
          "kista_8",
          "kista_9",
          "kista_10",
          "kista_11"
         ]
      }
    ]
  }
}

...

• Add proxy URL to properties file odlsli/src/main/properties/a1-adapter-api-dg.properties variable a1Mediator.proxy.url
  • This file is part of CCSDK/distribution project
  • After adding this information in the file, the distribution repo from CCSDK must be rebuild, follow by the SDNC/oam repo.
  • URL format must be protocol://host:port for example http://proxy:8443 

Running the functions

Run A1-enabled Controller

To view the A1 policy operations, you need to run the SDNC docker image. This image has few other docker image dependencies but not all are important for A1 policy testing. To bring up the sdnc container for A1 Policy Management testing a number of the not needed services can be removed from the docker compose file.

...

http://localhost:8282/apidoc/explorer/index.html
Username/password: admin/Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U

Run OSC Near-RT-RIC/A1 Simulator Docker Containers

• Start docker containers for each ric defined in oran/a1-policy-management/config/application_configuration.json in the step for "Configuration Policy Management Service" (in this example for ric1 and ric2) and providing A1 interface version OSC_2.1.0 with the following commands (use separate shells):

  Code Block
  language bash
  $ docker run -p 8085:8085 -p 8185:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric1 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0 $ docker run -p 8086:8085 -p 8186:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric2 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0 $ docker run -p 8087:8085 -p 8187:8185 -e A1_VERSION=STD_2.0.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric3 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0 $ docker run -p 8088:8085 -p 8188:8185 -e A1_VERSION=STD_2.0.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric4 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0

  
  

• Create a policy type json to load into the A1 simulators (running version OSC.2.1.0)

  Code Block
  language bash title pt1.json
  { "name": "pt1", "description": "pt1 policy type", "policy_type_id": 1, "create_schema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "OSC_Type1_1.0.0", "description": "Type 1 policy type", "type": "object", "properties": { "scope": { "type": "object", "properties": { "ueId": { "type": "string" }, "qosId": { "type": "string" } }, "additionalProperties": false, "required": [ "ueId", "qosId" ] }, "qosObjectives": { "type": "object", "properties": { "priorityLevel": { "type": "number" } }, "additionalProperties": false, "required": [ "priorityLevel" ] } }, "additionalProperties": false, "required": [ "scope", "qosObjectives" ] } }

  
  

• Put the example policy type into the started A1 simulator instances by running these curl commands (in this example to ric1 exposed to port 8085 and ric2 exposed to port 8086):

  Code Block
  language bash
  $ curl -X PUT -v "http://localhost:8085/a1-p/policytypes/1" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @pt1.json $ curl -X PUT -v "http://localhost:8086/a1-p/policytypes/1" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @pt1.json

  
  

• Create a policy type json to load into the A1 simulators (running version STD.2.0.0)

  Code Block
  language bash title std_qos2_0.0.1.json
  { "policySchema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "STD_QOS2_0.1.0", "description": "STD QOS2 policy type", "type": "object", "properties": { "scope": { "type": "object", "properties": { "ueId": { "type": "string" }, "qosId": { "type": "string" } }, "additionalProperties": false, "required": [ "ueId", "qosId" ] }, "qosObjectives": { "type": "object", "properties": { "priorityLevel": { "type": "number" } }, "additionalProperties": false, "required": [ "priorityLevel" ] } } }, "statusSchema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "STD_QOS_0.2.0", "description": "STD QOS policy type status", "type": "object", "properties": { "enforceStatus": { "type": "string" }, "enforceReason": { "type": "string" }, "additionalProperties": false, "required": [ "enforceStatus" ] } } }

  
  

• Put the example policy type into the started A1 simulator instances by running these curl commands (in this example to ric3 exposed to port 8087 and ric4 exposed to port 8088):

  Code Block
  language bash
  $ curl -X PUT -v "http://localhost:8087/policytype?id=STD_QOS2_0.1.0" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @std_qos2_0.0.1.json $ curl -X PUT -v "http://localhost:8088/policytype?id=STD_QOS2_0.1.0" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @std_qos2_0.0.1.json

  
  

Run ONAP A1 Policy Management Service Docker Container

• Run docker container using this command once the A1-enabled Controller and simulators have been fully started and optionally set the logging level to trace (the curl command will not work until the container is fully up and running).
  The configuration, application_configuration.json, of the controller and rics must be mounted as a volume to the container.

  Code Block
  language bash
  $ docker run -p 8081:8081 --network=nonrtric-docker-net --name=policy-agent-container --volume <Absolute path to application_configuration.json created above>:/opt/app/policy-agent/data/application_configuration.json onap/ccsdk-oran-a1policymanagementservice:1.2.2-SNAPSHOT

  
  

  Code Block
  language bash
  $ curl -X POST  http://localhost:8081/actuator/loggers/org.onap.ccsdk.oran.a1policymanagementservice -H "Content-Type:application/json" -d {\"configuredLevel\":\"trace\"}

  
  

• Once the Policy Management Service is up and running, it establishes connections to all configured Near-RT RICs (ric1 and ric2) via the A1 Controller.

• If the policy-agent-container is configured to log at trace level, the following logs entries should appear indicating that connection to the configured RICs has been established successfully via A1 Controller.

...

For troubleshooting/verification purposes you can view/access the policy-agent swagger API from url: http://localhost:8081/swagger-ui.html

Run OSC Non-RT RIC Control Panel Docker Container

Control panel use two docker images, one is the Control Panel API Gateway and the NonRTRIC Control Panel.

...

$ docker run -p 8080:8080 --network=nonrtric-docker-net nexus3.o-ran-sc.org:10002/o-ran-sc/nonrtric-controlpanel:2.3.0

Open NONRTRIC / A1 Policy Control Panel UI

The Control Panel UI can be accessed by pointing the web-browser to this URL: 

...