Page History

Test Case Id	Description	Pre-conditions	Test Steps	Expected Results
1	Perform healthcheck for the Policy components using Healthcheck API Drools PDP XACML PDP PAP BRMSGateway	Policy docker image ready and policy components (Drools, XACML, PAP, BRMS Gateway) should be up and running Server and authentication details should be configured at $POLICY_HOME/config/feature-healthcheck.properties	API – healthcheck Method - GET Endpoint: http://<host>:8081/healthcheck	All the policy components should return health status as “true”
2	Create config Policy for the following use cases VoLTE vFW vDNS vCPE	Policy components up and running	API – CreateConfig Method – PUT Endpoint: https://<host>:8081/Pdp/createPolicy	Config Policy should be created in Policy Engine (PAP)
3	Push Config policy to the PDP Engines for the following use cases VoLTE vFW vDNS vCPE	Policy components up and running	API - pushPolicy Method - PUT Endpoint: https:// <host>:8081/Pdp/pushPolicy	Config Policy should be pushed to the PDP group
4	Create Operational policy for the following use cases VoLTE vFW vDNS vCPE	Policy components up and running	API - createPolicy Method – PUT Endpoint: https://<host>:8081/Pdp/createPolicy	Operational Policy should be created in Policy Engine (PAP)
5	Push operational Policy to the PDP Engines for each use case VoLTE vFW vDNS vCPE	Policy components up and running	API - pushPolicy Method - PUT Endpoint: https:// <host>:8081/Pdp/pushPolicy	Operational Policy should be pushed to the PDP group
6	Retrieve the configs for the following use cases VoLTE vFW vDNS vCPE	Policy components up and running	API – getConfig Method – POST Endpoint: https://<host>:8081/Pdp/getConfig	Both Config and Operational Policies configured for each use case should be retrieved successfully
7	Import/Load Use case template for the following use cases (VoLTE, vCPE, vFW, vDNS)	Policy components should be up and running	API – policyEngineImport Method – POST Endpoint: https://<host>:8081/pdp/policyEngineImport	Policy service models should be imported for the specified use cases. We should be able to create policy from here.
8	Load the Drools Controller Configurations
9	Simulate DCAE Control loop event for each use case with higher or lower threshold values VoLTE vFW vDNS vCPE	Policy components up and running Simulator should be available	Invoke the Simulator API to trigger a DCAE control loop event	DCAE event should be triggered to Policy for each use case depending on the threshold configured
10	Simulate APPC Response for Use Case VFW & vCPE	Policy components up and running Simulator should be available	Invoke APPC simulator API with Policy data or Trigger a DCAE control loop event for vFW/vCPE	Valid Response from AppC Simulator API
11	Simulate VF-C Response for Use Case VOLTE	Policy components up and running Simulator should be available	Invoke VF-C simulator API with Policy data or Trigger a DCAE control loop event for VOLTE	Valid Response from VF-C Simulator API
12	Simulate SO Response for VDNS	Policy components up and running Simulator should be available	Invoke SO simulator API with Policy data or Trigger a DCAE control loop event for vDNS	Valid Response from SO Simulator API
13	Simulate A&AI Response for VDNS	Policy components up and running Simulator should be available	Invoke A&AI simulator API with Policy data or Trigger a DCAE control loop event for vDNS	Valid Response from A&AI Simulator API

...

vFirewall Use Case

Code Block

title	DCAE Control Loop Event (TCA) - vFirewall
linenumbers	true
collapse	true

{
            "closedLoopControlName": "CL-FRWL-LOW-TRAFFIC-SIG-d925ed73-8231-4d02-9545-db4e101f88f8",
            "version": "1.0.2",
            "requestID": "0138afac-b032-4e4b-bd30-88260f444888",
            "closedLoopAlarmStart": 1478189220547,
            "closedLoopEventClient": "tca.instance00001",
            "target_type": "VNF",
            "target": "generic-vnf.vnf-id",
            "AAI": {
                        "generic-vnf.vnf-id" : "vpp-testVNF Load Balancer (?)"
#
# IF DCAE is making a call to A&AI, can it populate the service ID??
# It would potentially save one call for POLICY
#
            },
            "from": "DCAE",
            "policyScope": "resource=vFirewall;type=configuration",
            "policyName": "configuration.dcae.microservice.tca.xml",
            "policyVersion": "v0.0.1",
            "closedLoopEventStatus": "ONSET"
}

Code Block

*TODO Show the API call to A&AI


Policy is getting the event from the Load Balancer. but the API call MUST go to the vpg VNF.


In R0 previously Policy pattern/match replaced the name. But that will not work with the introduction of CLAMP and the use of Policy YAML to specify the policy.


Policy needs to look up the service and then the VNF ID in order to make the call to APPC.

Code Block
*TODO show the returned response from A&AI

Code Block
*TODO show the ModifyConfig API call to APPC

Code Block
*TODO show the APPC response messages

vDNS Use Case

Code Block

title	DCAE Control Loop Event (TCA) - vDNS
linenumbers	true
collapse	true

{
                "closedLoopEventClient": "DCAE_INSTANCE_ID.dcae-tca",
                "policyVersion": "1.0.0.5",
                "policyName": "vLoadBalancer",
                "policyScope": "resource=SampleResource,service=SampleService,type=SampleType,closedLoopControlName=SampleClosedLoop",
                "target_type": "VM",
                "AAI": {
                    "vserver.vserver-name": "dfw1lb01lb01"
                },
                "closedLoopAlarmStart": 1484677482204798,
                "closedLoopEventStatus": "ONSET",
                "closedLoopControlName": "CL-DNS-LOW-TRAFFIC-SIG-d925ed73-8231-4d02-9545-db4e101f88f8",
                "version": "1.0.2",
                "target": "vserver.vserver-name",
                "requestID": "97964e10-686e-4790-8c45-bdfa61df770f",
                "from": "DCAE"
}

Code Block
*TODO Show the API call to A&AI This is the NAMED QUERY used in R0

Code Block
*TODO show the returned response from A&AI

Code Block
*TODO show the API call to SO This format should not have changed from R0

Code Block
*TODO show the SO API response message

VOLTE Use Case

Code Block

title	DCAE Control Loop Event (HOLMES) - VOLTE
linenumbers	true
collapse	true

{
                "closedLoopEventClient": "DCAE.HolmesInstance",
                "policyVersion": "1.0.0.5",
                "policyName": "vVOLTE",
                "policyScope": "resource=volte,service=VolteSErvice,type=SampleType,closedLoopControlName=VolteControlLoopCL-VOLTE-SIG-d925ed73-8231-4d02-9545-db4e101f88f8",
                "target_type": "VM",
                "AAI": {
								# the value "dfw1lb01lb01" comes from VES sourceName field
                                "vserver.vserver-name": "dfw1lb01lb01",
#
# WE ARE TRYING TO DETERMINE IF HOLMES CAN POPULATE SOME OF THESE VALUES
#
 								"service-instance.service-instance-id" : "TBD - Can Holmes provide this?",
								"generic-vnf.vnf-id" : "TBD",
								"vserver.vserver-id" : "TBD"
                },
                "closedLoopAlarmStart": 1484677482204798,
                "closedLoopEventStatus": "ONSET",
                "closedLoopControlName": "CL-VOLTE-SIG-d925ed73-8231-4d02-9545-db4e101f88f8",
                "version": "1.0.2",
                "target": "vserver.vserver-name",
                "requestID": "97964e10-686e-4790-8c45-bdfa61df770f",
                "from": "DCAE"
}

Code Block

* TODO Sample A&AI call to retrieve these values:


 								"service-instance.service-instance-id" : "TBD - Can Holmes provide this?",
								"generic-vnf.vnf-id" : "TBD",
								"vserver.vserver-id" : "TBD"
 
May require 2 calls. We are also hoping Holmes could prepopulate this if that team is going to retrieve topology details from A&AI anyway.

Code Block
* TODO - A&AI response(s)

Code Block
*TODO Call to VFC details

Code Block
*TODO response from VFC

vCPE Use Case

Code Block

title	DCAE Control Loop Event (TCA) - vCPE
linenumbers	true
collapse	true

{
            "closedLoopControlName": "CL-VCPE-UNIQUE-ID-1",
            "version": "1.0.2",
            "requestID": "0abc0000-b032-4e4b-bd30-88260f444888",
            "closedLoopAlarmStart": 1478189220547,
            "closedLoopEventClient": "tca.instance00001",
            "target_type": "VNF",
            "target": "generic-vnf.vnf-id",
            "AAI": {
                        "generic-vnf.vnf-id" : "????"
            },
            "from": "DCAE",
            "policyScope": "resource=theVNF;type=operational;closedLoopControlName=CL-VCPE-UNIQUE-ID-1",
            "policyName": "configuration.dcae.microservice.tca.xml",
            "policyVersion": "v0.0.1",
            "closedLoopEventStatus": "ONSET"
}

Code Block
*TODO Call to A&AI to retrieve values for APPC Restart

Code Block
*TODO response from A&AI

Code Block
*TODO request to APPC

Code Block
*TODO responses from APPC

Space shortcuts

Page tree

Versions Compared

Old Version 10

New Version 11

Key

vFirewall Use Case

vDNS Use Case

VOLTE Use Case

vCPE Use Case