...
- If any of the weave pods face a problem and gets stuck at "ImagePullBackOff " state, you can try running the " sudo kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')" " again.
- Sometimes, you need to delete the problematic pod, to let it terminate and start fresh. Use "kubectl delete po/<pod-name> -n <name-space> " to delete a pod.
- To "Unjoin" a worker node "kubectl delete node <node-name> (go through the "Undeploy APPC" process at the end if you have an APPC cluster running)
Install
...
ONAP uses Helm, a package manager for kubernetes.
...
"make" ( Learn more about ubuntu-make here : https://
...
wiki.
...
ubuntu.
...
com/ubuntu-make)
Code Block |
---|
#######################
# Install make from kubernetes directory.
#######################
$ sudo apt install make
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-62 linux-headers-4.4.0-62-generic linux-image-4.4.0-62-generic snap-confine
Use 'sudo apt autoremove' to remove them.
Suggested packages:
make-doc
The following NEW packages will be installed:
make
0 upgraded, 1 newly installed, 0 to remove and 72 not upgraded.
Need to get 151 kB of archives.
After this operation, 365 kB of additional disk space will be used.
Get:1 http://nova.clouds.archive.ubuntu.com/ubuntu xenial/main amd64 make amd64 4.1-6 [151 kB]
Fetched 151 kB in 0s (208 kB/s)
Selecting previously unselected package make.
(Reading database ... 121778 files and directories currently installed.)
Preparing to unpack .../archives/make_4.1-6_amd64.deb ...
Unpacking make (4.1-6) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up make (4.1-6) ...
|
Install Helm and Tiller on the Kubernetes Master Node (k8s-master)
ONAP uses Helm, a package manager for kubernetes.
Install helm (client side). The following instructions were taken from https://docs.helm.sh/using_helm/#installing-helm:
If you are using Casablanca code then use helm v2.9.1
Code Block | ||
---|---|---|
| ||
# As a root user, download helm and install it
curl https://raw.githubusercontent.com/kubernetes/helm/master/scripts/get > get_helm.sh
chmod 700 get_helm.sh
./get_helm.sh -v v2.8.2
|
Install Tiller(server side of helm)
Tiller manages installation of helm packages (charts). Tiller requires ServiceAccount setup in Kubernetes before being initialized. The following snippet will do that for you:
(Chrome as broswer is preferred. IE may add extra "CR LF" to each line, which causes problems).
Code Block | ||
---|---|---|
| ||
# id
ubuntu
# As a ubuntu user, create a yaml file to define the helm service account and cluster role binding.
cat > tiller-serviceaccount.yaml << EOF
apiVersion: v1
kind: ServiceAccount
metadata:
name: tiller
namespace: kube-system
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: tiller-clusterrolebinding
subjects:
- kind: ServiceAccount
name: tiller
namespace: kube-system
roleRef:
kind: ClusterRole
name: cluster-admin
apiGroup: ""
EOF
# Create a ServiceAccount and ClusterRoleBinding based on the created file.
sudo kubectl create -f tiller-serviceaccount.yaml
# Verify
|
If you are using Casablanca code then use helm v2.9.1
Code Block | ||
---|---|---|
| ||
# As a root user, download helm and install it
curl https://raw.githubusercontent.com/kubernetes/helm/master/scripts/get > get_helm.sh
chmod 700 get_helm.sh
./get_helm.sh -v v2.8.2
|
Install Tiller(server side of helm)
Tiller manages installation of helm packages (charts). Tiller requires ServiceAccount setup in Kubernetes before being initialized. The following snippet will do that for you:
(Chrome as broswer is preferred. IE may add extra "CR LF" to each line, which causes problems).
Code Block | ||
---|---|---|
| ||
# id
ubuntu
# As a ubuntu user, create a yaml file to define the helm service account and cluster role binding.
cat > tiller-serviceaccount.yaml << EOF
apiVersion: v1
kind: ServiceAccount
metadata:
name: tiller
namespace: kube-system
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: tiller-clusterrolebinding
subjects:
- kind: ServiceAccount
name: tiller
namespace: kube-system
roleRef:
kind: ClusterRole
name: cluster-admin
apiGroup: ""
EOF
# Create a ServiceAccount and ClusterRoleBinding based on the created file.
sudo kubectl create -f tiller-serviceaccount.yaml
# Verify
which helm
helm version |
Initialize helm....This command installs Tiller. It also discovers Kubernetes clusters by reading $KUBECONFIG (default '~/.kube/config') and using the default context.
...
Code Block |
---|
#Note that all components are changed to enabled:false except appc, robot, and mysql. Here we set number of APPC replicas to 3. $ cat ~/oom/kubernetes/onap/values.yaml # Copyright © 2017 Amdocs, Bell Canada # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. ################################################################# # Global configuration overrides. # # These overrides will affect all helm charts (ie. applications) # that are listed below and are 'enabled'. ################################################################# global: # Change to an unused port prefix range to prevent port conflicts # with other instances running within the same k8s cluster nodePortPrefix: 302 # ONAP Repository # Uncomment the following to enable the use of a single docker # repository but ONLY if your repository mirrors all ONAP # docker images. This includes all images from dockerhub and # any other repository that hosts images for ONAP components. #repository: nexus3.onap.org:10001 repositoryCred: user: docker password: docker # readiness check - temporary repo until images migrated to nexus3 readinessRepository: oomk8s # logging agent - temporary repo until images migrated to nexus3 loggingRepository: docker.elastic.co # image pull policy pullPolicy: Always # default mount path root directory referenced # by persistent volumes and log files persistence: mountPath: /dockerdata-nfs # flag to enable debugging - application support required debugEnabled: false # Repository for creation of nexus3.onap.org secret repository: nexus3.onap.org:10001 ################################################################# # Enable/disable and configure helm charts (ie. applications) # to customize the ONAP deployment. ################################################################# aaf: enabled: false aai: enabled: false appc: enabled: true replicaCount: 3 config: openStackType: OpenStackProvider openStackName: OpenStack openStackKeyStoneUrl: http://localhost:8181/apidoc/explorer/index.html openStackServiceTenantName: default openStackDomain: default openStackUserName: admin openStackEncryptedPassword: admin clamp: enabled: false cli: enabled: false consul: enabled: false dcaegen2: enabled: false dmaap: enabled: false esr: enabled: false log: enabled: false sniro-emulator: enabled: false oof: enabled: false msb openStackEncryptedPassword: admin clamp: enabled: false multicloudcli: enabled: false policyconsul: enabled: false portaldcaegen2: enabled: false robotdmaap: enabled: truefalse sdcesr: enabled: false sdnclog: enabled: false replicaCount: 1sniro-emulator: configenabled: enableClustering: false mysqloof: disableNfsProvisionerenabled: true replicaCount: 1 so: false msb: enabled: false replicaCountmulticloud: 1 livenessenabled: # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container false policy: enabled: true # so server configuration configfalse portal: # message router configuration dmaapTopic: "AUTO" # openstack configuration openStackUserName: "vnf_user" openStackRegion: "RegionOne" openStackKeyStoneUrl: "http://1.2.3.4:5000" openStackServiceTenantName: "service" openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e" # configure embedded mariadb mariadbenabled: false robot: enabled: true sdc: enabled: false sdnc: enabled: false replicaCount: 1 config: enableClustering: false mysql: configdisableNfsProvisioner: true mariadbRootPasswordreplicaCount: password1 uuiso: enabled: false vfc: enabledreplicaCount: false1 vid liveness: # necessary enabled: false vnfsdk: enabled: false |
Note: If you set number of appc replicas in onap/values.yaml, it will overrides the setting you are about to do in the next step.
Run below command to setup a local Helm repository to serve up the local ONAP charts:
Code Block |
---|
#Press "Enter" after running the command to get the prompt back
$ nohup helm serve &
[1] 2316
$ Regenerating index. This may take a moment.
Now serving you on 127.0.0.1:8879
# Verify
$ helm repo list
NAME URL
stable https://kubernetes-charts.storage.googleapis.com
local http://127.0.0.1:8879
|
If you don't find the local repo, add it manually.
Note the IP(localhost) and port number that is listed in above response (8879 here) and use it in "helm repo add" command as follows:
Code Block |
---|
$ helm repo add local http://127.0.0.1:8879
"local" has been added to your repositories
|
Install "make" ( Learn more about ubuntu-make here : https://wiki.ubuntu.com/ubuntu-make) and build a local Helm repository (from the kubernetes directory):
to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
enabled: true
# so server configuration
config:
# message router configuration
dmaapTopic: "AUTO"
# openstack configuration
openStackUserName: "vnf_user"
openStackRegion: "RegionOne"
openStackKeyStoneUrl: "http://1.2.3.4:5000"
openStackServiceTenantName: "service"
openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
# configure embedded mariadb
mariadb:
config:
mariadbRootPassword: password
uui:
enabled: false
vfc:
enabled: false
vid:
enabled: false
vnfsdk:
enabled: false
|
Note: If you set number of appc replicas in onap/values.yaml, it will overrides the setting you are about to do in the next step.
Run below command to setup a local Helm repository to serve up the local ONAP charts:
Code Block |
---|
#Press "Enter" after running the command to get the prompt back
$ nohup helm serve &
[1] 2316
$ Regenerating index. This may take a moment.
Now serving you on 127.0.0.1:8879
# Verify
$ helm repo list
NAME URL
stable https://kubernetes-charts.storage.googleapis.com
local http://127.0.0.1:8879
|
If you don't find the local repo, add it manually.
Note the IP(localhost) and port number that is listed in above response (8879 here) and use it in "helm repo add" command as follows:
Code Block |
---|
$ helm repo add local http://127.0.0.1:8879
"local" has been added to your repositories
|
build a local Helm repository (from the kubernetes directory):
Code Block |
---|
Code Block |
#######################
# Install make from kubernetes directory.
#######################
$ sudo apt install make
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-62 linux-headers-4.4.0-62-generic linux-image-4.4.0-62-generic snap-confine
Use 'sudo apt autoremove' to remove them.
Suggested packages:
make-doc
The following NEW packages will be installed:
make
0 upgraded, 1 newly installed, 0 to remove and 72 not upgraded.
Need to get 151 kB of archives.
After this operation, 365 kB of additional disk space will be used.
Get:1 http://nova.clouds.archive.ubuntu.com/ubuntu xenial/main amd64 make amd64 4.1-6 [151 kB]
Fetched 151 kB in 0s (208 kB/s)
Selecting previously unselected package make.
(Reading database ... 121778 files and directories currently installed.)
Preparing to unpack .../archives/make_4.1-6_amd64.deb ...
Unpacking make (4.1-6) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up make (4.1-6) ...
#######################
# Build local helm repo
#######################
$ make all
[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'
[common]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting common
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/common-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[dgbuilder]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting dgbuilder
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/dgbuilder-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[postgres]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting postgres
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/postgres-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[mysql]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting mysql
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mysql-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
make[2]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[vid]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting vid
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vid-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[so]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting so
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/so-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[cli]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting cli
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/cli-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[aaf]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting aaf
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/aaf-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[log]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting log
[INFO] Chart.yaml: icon is recommended
[WARNING] templates/: directory not found
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/log-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[esr]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting esr
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/esr-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[mock]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting mock
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mock-0.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[multicloud]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting multicloud
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/multicloud-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[mso]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting mso
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mso-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[dcaegen2]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting dcaegen2
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/dcaegen2-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[vnfsdk]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting vnfsdk
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vnfsdk-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[policy]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting policy
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/policy-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[consul]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting consul
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/consul-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[clamp]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting clamp
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/clamp-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[appc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 3 charts
Downloading common from repo http://127.0.0.1:8879
Downloading mysql from repo http://127.0.0.1:8879
Downloading dgbuilder from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting appc
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/appc-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[sdc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting sdc
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/sdc-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[portal]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting portal
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/portal-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[aai]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting aai
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/aai-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[robot]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting robot
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/robot-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[msb]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting msb
[INFO] Chart.yaml: icon is recommended
[WARNING] templates/: directory not found
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/msb-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[vfc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting vfc
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vfc-0.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[message-router]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting message-router
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/message-router-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[uui]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting uui
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/uui-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[sdnc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 3 charts
Downloading common from repo http://127.0.0.1:8879
Downloading mysql from repo http://127.0.0.1:8879
Downloading dgbuilder from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting sdnc
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/sdnc-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
[onap]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 24 charts
Downloading aaf from repo http://127.0.0.1:8879
Downloading aai from repo http://127.0.0.1:8879
Downloading appc from repo http://127.0.0.1:8879
Downloading clamp from repo http://127.0.0.1:8879
Downloading cli from repo http://127.0.0.1:8879
Downloading common from repo http://127.0.0.1:8879
Downloading consul from repo http://127.0.0.1:8879
Downloading dcaegen2 from repo http://127.0.0.1:8879
Downloading esr from repo http://127.0.0.1:8879
Downloading log from repo http://127.0.0.1:8879
Downloading message-router from repo http://127.0.0.1:8879
Downloading mock from repo http://127.0.0.1:8879
Downloading msb from repo http://127.0.0.1:8879
Downloading multicloud from repo http://127.0.0.1:8879
Downloading policy from repo http://127.0.0.1:8879
Downloading portal from repo http://127.0.0.1:8879
Downloading robot from repo http://127.0.0.1:8879
Downloading sdc from repo http://127.0.0.1:8879
Downloading sdnc from repo http://127.0.0.1:8879
Downloading so from repo http://127.0.0.1:8879
Downloading uui from repo http://127.0.0.1:8879
Downloading vfc from repo http://127.0.0.1:8879
Downloading vid from repo http://127.0.0.1:8879
Downloading vnfsdk from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting onap
Lint OK
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/onap-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
|
...