...
| Attribute | Qualifier | Cardinality | Content | Description |
|---|---|---|---|---|
| loadbalancerIP | M | 0..1 | String | When present, this attribute specifies the name of the deployment artifact input parameter through which the orchestrator can configure the loadbalancerIP parameter of the K8s service or ingress controller that the ExtCpd represents. |
| externalIPs | M | 0..N | String | When present, this attribute specifies the name of the deployment artifact input parameter through which the orchestrator can configure the extermalIPs parameter of the K8s service or ingress controller, or the pod network interface annotation, that the ExtCpd represents. The param name and provided IP address(es) value will be passed to the deployment tool when deploying the DeploymentArtifacts. Note 1 |
| nadNames | M | 0..N | String Note 2, Note 3 | These attributes specifies, for an ExtCpd respesenting a secondary network interface, the name(s) of the deployment artifact input parameter(s) through which the orchestrator can provide the names of the network attachment definitions (NADs) the orchestrator has created as base for the network interface the ExtCpd represents. It is expected that the NADs themselves have been created prior to the deployment of the deployment artifacts. |
| nadNamespace | M | 0..1 | String | Specifies, for an asdExtCpd ExtCpd respesenting a secondary network interface, the name of the deployment artifact input parameter through which the orchestrator can provide the namespace where the NADs are located. Attribute may be omitted if the namespace is same as the application namespace. |
Note 1: When the asdExt Cpd ExtCpd represent a networkRedundant/mated-pair of sriov interfaces, there are references to 2 or 3 related NADs needed to be passed, while for other interface types only one NAD reference is needed to be passed.
...
Note 3: A direct attached (passthrough) network interface, such as an sriov interface, attaches to a network via only one of the two switch planes in the infrastructure.
When using a direct attached network interface one therefore commonly in a pod uses a mated pair of sriov network attachments, where each interface attaches same network but via different switchplane.
The application uses the mated pair of network interfaces as a single logical “swith-path-redundant” network interface – and this is represented by a single ExtCpd.
Also there is a case where a third “bond” attachment interface is used in the pod, bonding the two direct interfaces so that the application do not need to handle the redundancy issues – application just uses the bond interface.
In this case all three attachments are together making up a logical “switch-path-redundant” network interface represented by a single ExtCpd. When three NADs are used in the ExtCpd the NAD implementing the bond attachment interface is provided through the parameter indicated in the third place in the nadNames attribute.
enhancedClusterCapabilities Information Element
...