...
V00001: WindRiver OpenStack VIM Resource Registration
| Test Case Id | V00001 |
| Test Case Name | WindRiver OpenStack VIM Resource Registration |
| Description | WindRiver OpenStack VIM Resource Registration |
| Release | Amsterdam |
| Preconditions | - The WindRiver OpenStack VIM is configured with tenant information and provider networks
- The WindRiver OpenStack VIM services (console, auth, neutron, image, glance, etc) are accessible from ONAP by IP
|
| Testing Steps | - Add VIM from ONAP GUI with VIM location information, tenant authentication information
- VIM default service url can be configured based on real VIM settings
|
| Expected Results | - VIM resource is registered successfully
- Tenant authentication information is stored correctly
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab |
|
| Tester Name |
|
...
V00002: VMWare OpenStack VIM Resource Registration
| Test Case Id | V00002 |
| Test Case Name | VMWare OpenStack VIM Resource Registration |
| Description | VMWare OpenStack VIM Resource Registration |
| Release | Amsterdam |
| Preconditions | - The VMWare OpenStack VIM is configured with tenant information and provider networks
- The VMWare OpenStack VIM services (console, auth, neutron, image, glance, etc) are accessible from ONAP by IP
|
| Testing Steps | - Add VIM from ONAP GUI with VIM location information, tenant authentication information
- VIM default service url can be configured based on real VIM settings
|
| Expected Results | - VIM resource is registered successfully
- Tenant authentication information is stored correctly
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab |
|
| Tester Name |
|
...
V00003: Data Center Gateway Controller Resource Registration
| Test Case Id | V00003 |
| Test Case Name | Data Center Gateway Controller Resource Registration |
| Description | This is part of WAN setup testing. Each data center has its own gateway and controlled by local SDN controller |
| Release | Amsterdam |
| Preconditions | - Each DC gateway has been manually installed and configured correctly
- Each DC gateway local controller has been manually installed and configured correctly
|
| Testing Steps | - Register each DC gateway local controller from ONAP ESR GUI with the needed information (location, IP, port, authentication information, etc)
|
| Expected Results | - The DC local controller is registered successfully
- The DC local controller information is stored correctly
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Tester Name |
|
...
V00004: SDN WAN Controller Resource Registration
| Test Case Id | V00004 |
| Test Case Name | SDN WAN Controller Resource Registration |
| Description | This is part of WAN setup testing. There are at least two PEs in the network, controlled by one SDN WAN controller |
| Release | Amsterdam |
| Preconditions | - Each PE router has been manually installed and configured correctly
- SDN WAN controller has been manually installed and configured correctly
|
| Testing Steps | - Register SDN WAN controller from ONAP ESR GUI with the needed information (IP, port, authentication information, etc)
|
| Expected Results | - The SDN WAN controller is registered successfully
- SDN WAN controller information is stored correctly
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Tester Name |
|
V00005: SVNFM Resource Registration
| Test Case Id | V00005 |
| Test Case Name | SVNFM |
Resource | Registration |
| Description | This is part of service creating testing. |
| Release | Amsterdam |
| Preconditions | - SVNFM ready
|
| Testing Steps | - Register SVNFM from ONAP ESR GUI with the needed information (IP, port, authentication information, etc)
|
| Expected Results | - The SVNFM is registered successfully
- SVNFM information is stored correctly
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Tester Name |
|
V00006: EMS Resource Registration
| Test Case Id | V00006 |
| Test Case Name |
EMS Resource | EMS Registration |
| Description | This is part of service close loop testing. |
| Release | Amsterdam |
| Preconditions | - VNF vendor's EMS ready
|
| Testing Steps | - Register EMS from ONAP ESR GUI with the needed information (IP, port, authentication information, etc)
|
| Expected Results | - The EMS is registered successfully
- EMS information is stored correctly
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Tester Name |
|
V00007: VoLTE VNFs Onboarding
...
| Test Case Id | V00010 |
| Test Case Name | WAN Service Creation |
| Description | This test creates WAN service |
| Release | Amsterdam |
| Preconditions | - All PNFs (PE, DC gateway) resources have been onboarded
- All required network connection types (VLAN, MPLS L3 VPN, VXLAN, etc) are defined by SDC
|
| Testing Steps | - In SDC create WAN service
- In service composition, pull in 2 PEs
- In service composition, pull in 2 data center gateways
- Create underlay network as following:
- DC GW1 → PE1 as vlan
- DC GW2 → PE2 as vlan
- PE1 → PE2 as MPLS L3 VPN
- Create overlay network DC GW1 → DC GW2 as VXLAN
|
| Expected Results | - Underlay WAN network created successfully
- Overlay WAN network create created successfully
|
| Actual Results |
|
| Conclusion (Pass/Fail) |
|
| Testing Lab | CMCC OpenLab |
| Testing Date |
|
| Tester Name |
|
...
