Page History

...

• image: onap/usecase-ui-server: 5.1.1
• image: onap/usecase-ui: 5.1.0

2. MSB Configuration

Register so-orchestrationTasks and so-serviceInstances interface to MSB.

Interface registration can be done through portal.

Steps(Portal):

Link: https://{{master server ip}}:30284/iui/microservices/default.html

 1.Select ‘Service Discover’ in the left pane

 2. Click 'Service Register' button.

Image Modified

 3. Input the basic info as the picture shows(also refer to the registration info provided above)

Image Modified

4. Click Add Host button.

    Input IP Address and Port then click the 'SAVE' button. （Use cmd ’kubectl get svc n onap|grep dl-des‘ to confirm IP and port.）

Deployment Prerequisite/dependencies for DCAE:

1. VES, PM mapper and DataFile Collector, dcae-mongodb, Datalake Extraction Service(DES) and Datalake-feeder services should be running.

3. DCAE-MONGO DB:

1. Login to dcae-mongodb container and execute following commands to check if PM data was saved in DB:
   1. mongo
   2. use datalake
   3. db.unauthenticatedperformancemeasurements.find({})

   4. to load sample data:

      Code Block
      title mongodb sample data 1 linenumbers true collapse true
      db.unauthenticatedperformancemeasurements.insert({ "event": { "commonEventHeader": { "domain": "perf3gpp", "eventId": "dfe43a5c-0868-4275-b1c9-e45945b6a38c", "eventName": "perf3gpp_CORE-cucpserver2_pmMeasResult", "lastEpochMicrosec": 1610689590387, "priority": "Normal", "reportingEntityName": "", "sequence": 1, "sourceName": "oteNB5309", "startEpochMicrosec": 1610689590387, "version": 4, "vesEventListenerVersion": "7.1", "timeZoneOffset": "UTC+05:00" }, "perf3gppFields": { "perf3gppFieldsVersion": "1.0", "measDataCollection": { "granularityPeriod": 900, "measuredEntityUserName": "", "measuredEntityDn": "cucpserver2", "measuredEntitySoftwareVersion": "r0.1", "measInfoList": [ { "measInfoId": { "sMeasTypesList": "SLICE" }, "measTypes": { "sMeasTypesList": [ "PDUSessionEstSR.00110010" ] }, "measValuesList": [ { "suspectFlag": false, "measResults": [ { "p": 1, "sValue": "166" } ] } ] } ] } } } })

      
      

      Code Block
      title mongodb sample data 2 linenumbers true collapse true
      db.unauthenticatedperformancemeasurements.insert({ "event": { "commonEventHeader": { "domain": "perf3gpp", "eventId": "df069b2e-0993-4aca-9e5e-60a11c6e3399", "eventName": "perf3gpp_CORE-cucpserver2_pmMeasResult", "lastEpochMicrosec": 1606743157915, "priority": "Normal", "reportingEntityName": "", "sequence": 1, "sourceName": "oteNB5309", "startEpochMicrosec": 1606743157914, "version": 4, "vesEventListenerVersion": "7.1", "timeZoneOffset": "UTC+05:00" }, "perf3gppFields": { "perf3gppFieldsVersion": "1.0", "measDataCollection": { "granularityPeriod": 900, "measuredEntityUserName": "", "measuredEntityDn": "cucpserver2", "measuredEntitySoftwareVersion": "r0.1", "measInfoList": [ { "measInfoId": { "sMeasTypesList": "SLICE" }, "measTypes": { "sMeasTypesList": [ "PDUSessionEstSR.00110010" ] }, "measValuesList": [ { "suspectFlag": false, "measResults": [ { "p": 1, "sValue": "188" } ] } ] } ] } } } })

      
      

4. Datalake Extraction Service(DES):

1. Build presto image and push the images to a exsting repository
   1. Download and extract presto package version v0.0.2: presto-v0.0.2.tar.gz
   2. docker build -t presto:v0.0.2 .
   3. docker tag presto:v0.0.2 registry.baidubce.com/onap/presto:v0.0.2
   4. docker push registry.baidubce.com/onap/presto:v0.0.2
   5. Note： Replace the repository path with your own repository.
2. Install presto service
   1. kubectl -n onap run dl-presto --image=presto:v0.0.2 --env="MongoDB_IP=dcae-mongohost" --env="MongoDB_PORT=27017" --image-pull-policy=IfNotPresent
   2. kubectl expose pod dl-presto --name=dl-presto --port=9000 --target-port=9000 --type=NodePort -n onap

3. Login to the dev-dcae-datalake-postgres-primary container and execute following sql commands:

   Code Block
   title datalake-db init_data linenumbers true collapse true
   psql -Udatalake -ddatalake \dt delete from map_db_topic; delete from map_db_design; delete from db; delete from data_exposure ; insert into db (id, db_type_id, enabled, encrypt, name,host,port,database_name) values (2, 'MONGO', true, true, 'MongoDB 1','dcae-mongohost',27017,'datalake'); insert into map_db_topic(db_id,topic_id) select db.id, topic.id from db_type, db, topic where db.db_type_id=db_type.id and db_type.tool=false; update kafka set secure=true, pass='admin_secret' where id=1; insert into topic_name (id) values ('unauthenticated.PERFORMANCE_MEASUREMENTS'); insert into data_exposure(id, note,sql_template,db_id) values ('pDUSessionEstSR','pm_message', 'SELECT event.perf3gppFields.measDataCollection.measInfoList[1].measValuesList[1].measResults[1].sValue AS pDUSessionEstSR, from_unixtime(event.commonEventHeader.startEpochMicrosec/1000) AS timeStamp FROM unauthenticatedperformancemeasurements WHERE any_match(event.perf3gppFields.measDataCollection.measInfoList[1].measTypes.sMeasTypesList, e -> e like ''${id}'') AND event.commonEventHeader.startEpochMicrosec >= ${timeStamp}',2);

   
   

4. Execute below request to verify: 

   curl --header "Content-type: application/json" --request POST --data '{"hours":4,"id":"PDUSessionEstSR.00110010","timeStamp":"1606743157914"}' http://dl-des:1681/datalake/v1/exposure/pDUSessionEstSR -i 

5. KPI - MS :

Deployment Prerequisite/dependencies
  - DCAE and DMaaP pods should be up and running. 
  - PM mapper service should be running.

...

 curl -k https://message-router.onap.svc.cluster.local:3905/events/unauthenticated.DCAE_KPI_OUTPUT/c1/g1

6. RANSIM :

Follow the steps below to setup the Ransim environment:

1. Clone the repo from : git clone https://gerrit.onap.org/r/integration/simulators/ran-simulator

2. Import the latest SDNC certificate into ransim

   1. Download the SDNC cacerts from browser.

   2. Import the cacert file into the directory ran-simulator/ransim/docker/config/ransim/ and name it as 'jssecacerts'.(Sample step to import shown below)

      • keytool -import -noprompt -trustcacerts -alias SDNC -file <certsfile> -keystore /ransim/docker/config/ransim/jssecacerts -storepass changeit

3. Go to the ran-simulator/ransim directory and build the project : JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64/ mvn clean install -P docker
4. From docker folder, run the following after building the image locally and updating the SDNR IP address in the docker-compose file : docker-compose up

5. Run the following command to start the RAN network slice simulation

   curl -X POST http://localhost:8081/ransim/api/StartRanSliceSimulation -i

   To access the logs:
   docker exec –ti ransim bash
   policy@ransim:/tmp/ransim-install$ tail -f /opt/app/policy/servers/ransim/logs/ransim-rest.log 
6. Setup honeycomb (Refer HONEYCOMB section)
7. You can update/add/delete data(throughput, PRBs, maxNoConns etc) in mariadb container(credentials in docker-compose file) if required before generation of PM data.
8. Sample data to be loaded: ransim-intelligent-slicing-data.txt
9. To view the CUCP honeycomb containers  logs:
   1. docker exec -ti cucpserver1 bash
   2. tail -f var/log/honeycomb/honeycomb.log
   3. docker exec -ti cucpserver2 bash
   4. tail -f var/log/honeycomb/honeycomb.log
10. Check the folder(where SFTP setup is done) to view the generated PM data files.
11. Access VES, data file collector, dmaap-dr, PM mapper, ml-prediction-ms and slice-analysis logs to verify.
12. To manually generate PM data:
    1. curl -X POST -H "Content-Type:  text/plain" http://localhost:8081/ransim/api/GenerateIntelligentSlicingPmData -i
       
13. To Stop PM data:
    1. curl -X POST -H "Content-Type:  text/plain" http://localhost:8081/ransim/api/stopIntelligentSlicingPmData -i

7. Honeycomb:

Repo URL: https://github.com/onap-oof-pci-poc/ran-sim

...