...
Clone the OOM project from ONAP gerrit
Run On the node where you have installed Helm (from 3. Set Up the Undercloud), run the following command to clone OOM project from ONAP gerrit at any directory you prefer, and that directory will be referred as "{$OOM}" in this page.
...
# | Purpose | Command Examples |
---|---|---|
1 | Get the shared new startODL.sh script content | Go to gerrit change 25475 click on installation/sdnc/src/main/scripts/startODL.sh under the Files section to view the details of the changes click on the Download button to download the startODL_new.sh.zip file open the sh file inside the zip file, and copy the content (to be used in step 2) |
2 | Create new startODL.sh on the Kubernetes node VM | mkdir -p /homedockerdata-nfs/ubuntu/cluster/scripts vi /home/ubuntudockerdata-nfs/cluster/script/startODL.sh paste the copied content from step 1 to this file |
3 | Give execution permission to the new startODL.sh script | chmod 777 /home/ubuntudockerdata-nfs/cluster/script/startODL.sh |
...
Get SDN-C Cluster Templates From Gerrit Topic SDNC-163
...
Info |
---|
The source of the templates, gerrit change 25467, has been merged into sdnc/oam project on December 20th, 2017. Skip step 1 and 2 if your cloned OOM project includes this change. |
# | Purpose | Command and Examples | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Get the shared templates code git fetch command | Go to gerrit change 25467 Click Download downward arrow, and click the click board in the same line as Checkout to get the git commands (which includes the git fetch and checkout commands).
| |||||||||||||||
2 | Fetch the shared template to the oom directory on the Kubernetes node VM | cd {$OOM} run the git commands got from step 1 | |||||||||||||||
3 | Link the new startODL.sh |
vi kubernetes/sdnc/templates/sdnc-statefulset.yaml do the following changes:
| |||||||||||||||
3 | Link the ODL deploy directory |
ODL automatically install bundles/pacakges under its deploy directory, this mount point provides capability to drop a bundle/package in the Kubernetes node at / home/ubuntudockerdata-nfs/cluster/deploy directory and it will automativally be installed in the sdnc pods. vi kubernetes/sdnc/templates/sdnc-statefulset.yaml do the following changes:
| |||||||||||||||
45 | Enable cluster configuration | vi kubernetes/sdnc/values.yaml change the following fields with the new value:
|
...
# | Purpose | Command and Example | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Find the node name |
kubectl get node
| ||||||||||
2 | Set label on the node | kubectl label nodes <NODE_NAME_FROM_LAST_STEP> disktype=ssd
| ||||||||||
3 | Check the label has been set on the node | kubectl get node --show-labels
| ||||||||||
4 | Update nfs-provisioner pod template to force it running on the nfs server node | In nfs-provisoner-deployment.yaml file, add “spec.template.spec.nodeSelector” for pod “nfs-provisioner”
|
Create the ONAP Config
...
(Only Once) Create the ONAP config using a sample YAML file
cd {$OOM}/kubernetes/config
...
Setup onap-parameters
...
.yaml file
The following commands must run one time before run create ONAP configuration.
cd {$OOM}/kubernetes/config
cp onap-parameters-sample.yaml onap-parameters.yaml
This only needs to be done one time.
Run createConfig
Info | ||
---|---|---|
| ||
You can skip the steps in this section by following instruction in autoCreateOnapConfig of Scripts section to
|
# | Purpose | Command and Examples | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0 | Set the OOM Kubernetes config environment | cd {$OOM}/kubernetes/oneclick source setenv.bash | ||||||||||||||||||
1 | Run the createConfig script to create the ONAP config | cd {$OOM}/kubernetes/config
| ||||||||||||||||||
2 | Wait for the config-init container to finish | Use the following command to monitor onap config init intil it reaches to Completed STATUS:
| ||||||||||||||||||
Additional checks for config-init |
|
...
Deploy the SDN-C Application
...
Info | ||
---|---|---|
| ||
You can skip the steps in this section by following instruction in autoDeploySdnc of Scripts section to
|
# | Purpose | Command and Examples | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0 | Purpose | Command and Examples | 0 | Set the OOM Kubernetes config environment(If you have set the OOM Kubernetes config enviorment in the same terminal, you can skip this step) | cd {$OOM}/kubernetes/oneclick source setenv.bash | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | Run the createAll script to deploy the SDN-C appilication | cd {$OOM}/kubernetes/oneclick ./createAll.bash -n onap -a sdnc
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ensure that the SDN-C appication has started | Use the kubectl get pods command to monitor the SDN-C startup; you should observe:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | Validate that all SDN-C pods and services are created properly | helm ls --all
kubectl get namespacesnamespace
kubectl get deployment --all-namespaces
kubectl get clusterrolebinding --all-namespaces
kubectl get serviceaccounts --all-namespaces
kubectl get service -n onap-all-namespacessdnc
kubectl get servicepods --all-namespaces NAMESPACE NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE default kubernetes ClusterIP 10.43.0.1 <none> 443/TCP 15d kube-system heapster ClusterIP 10.43.210.11 <none> 80/TCP 15d kube-system kube-dns ClusterIP 10.43.0.10 <none> 53/UDP,53/TCP 15d kube-system kubernetes-dashboard ClusterIP 10.43.196.205 <none> 9090/TCP 15d kube-system monitoring-grafana ClusterIP 10.43.90.8 <none> 80/TCP 15d kube-system monitoring-influxdb ClusterIP 10.43.52.1 <none> 8086/TCP 15d kube-system tiller-deploy ClusterIP 10.43.106.73 <none> 44134/TCP 15d onap-sdnc dbhost ClusterIP None <none> 3306/TCP 17m onap-sdnc sdnc-dgbuilder NodePort 10.43.97.219 <none> 3000:30203/TCP 17m onap-sdnc sdnc-portal NodePort 10.43.72.72 <none> 8843:30201/TCP 17m onap-sdnc sdnctldb01 ClusterIP None <none> 3306/TCP 17m onap-sdnc sdnctldb02 ClusterIP None <none> 3306/TCP 17m onap-sdnc sdnhost NodePort 10.43.99.163 <none> 8282:30202/TCP,8201:30208/TCP 17m ubuntu@sdnc-k8s:~/oom/kubernetes/oneclick$ -a
docker ps |grep sdnc
kubectl get pods --all-namespaces -a
docker ps |grep sdnc
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | Validate that the SDN-C bundlers are up |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | Validate that the SDN-C APIs are shown on the ODL RestConf page | Access the ODL RestConf page from the following URL:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | Validate that the SDN-C bundlers are up |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | Validate that the SDN-C APIs are shown on the ODL RestConf page | Access the ODL RestConf page from the following URL:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | Validate the SDN-C ODL cluster | Goal:Verify if the SDN-C ODL-Cluster is running properly Prerequisites
Use ODL intergration tool to monitor ODL cluster
| 5 | Validate the SDN-C ODL cluster | Goal:Verify if the SDN-C ODL-Cluster is running properly Prerequisites
Use ODL intergration tool to monitor ODL cluster
Use testCluster RPC to test SDN-C load sharingThe testCluster-bundle.zip provides a testBundle which offers a testCluster API to help with validating SDN-C RPC load sharing in the deployed SDN-C cluster. It's just as easy as to do the following:
|
Undeploy the SDN-C Application
...
Info | ||
---|---|---|
| ||
You can skip the steps in this section by following instruction in autoCleanSdnc of Scripts section to
|
# | Purpose | Command and Examples | ||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0 |
(If you have set OOM kubernetes config enviorment in the same terminal, you can skip this | Purpose | Command and Examples | 0 |
(If you have set OOM kubernetes config enviorment in the same terminal, you can skip this step) | cd {$OOM}/kubernetes/oneclick source setenv.bash | ||||||||||||||||||||||||||||||||||||
1 |
| ./deleteAll.bash -n onap -a sdnc
| ||||||||||||||||||||||||||||||||||||||||
2 |
| docker ps |grep sdnc
kubectl get pods --all-namespaces -a
kubectl get service --all-namespaces
kubectl get serviceaccounts --all-namespaces
kubectl get clusterrolebinding --all-namespaces
kubectl get deployment --all-namespaces
kubectl get namespaces
helm ls --all
|
Remove the ONAP Config
...
Info | ||
---|---|---|
| ||
You can skip the steps in this section by following instruction in autoCleanOnapConfig of Scripts section to
|
# | Purpose | Command and Examples | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0 |
(If you have set OOM kubernetes config enviorment in the same terminal, you can skip this step) | Purpose | Command and Examples | 0 |
(If you have set OOM kubernetes config enviorment in the same terminal, you can skip this step) | cd {$OOM}/kubernetes/oneclick source setenv.bash | ||||||||||||||||||||||
1 |
| ./deleteAll.bash -n onap
| ||||||||||||||||||||||||||
2 |
This step is to clean up the leftover items which were created by the config/createConfig script but not cleaned up by the oneclick/deleteAll script.
|
| ||||||||||||||||||||||||||
3 |
| sudo rm -rf /dockerdata-nfs/onap |
Scripts
Anchor | ||||
---|---|---|---|---|
|
The following scripts help to simplify various procedures by automating them following scripts are intended to be placed under directory {$OOM}/kubernetes/oneclick/tools and help to simplify various procedures by automating them
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
########################################################################################
# This script wraps {$OOM}/kubernetes/config/createConfig.sh script #
# and will only terminated when the ONAP configuration is Completed #
# #
# Before using it, do the following to prepare the bash file: | ||||||||
Code Block | ||||||||
| ||||||||
######################################################################################## # This script replaces {$OOM}/kubernetes/config/createConfig.sh script # # and will only terminated when the ONAP configuration is Completed 1, cd {$OOM}/kumbernetes/oneclick/tools # # # # 2, vi autoCreateOnapConfig.bash # # 3, paste the full content here to autoCreateOnapConfig.bash file and save the file # # Before using it, do the following to prepare the bash file: 4, chmod 777 autoCleanOnapConfig.bash # # 1, cd {$OOM}/kumbernetes/oneclick # # # # 2, vi autoCreateOnapConfig.bash # # To run it, just enter the following command: # # 3, paste the full content here to autoCreateOnapConfig.bash file and save the file # # 4, chmod 777 autoCreateOnapConfig.bash # # ./autoCreateOnapConfig.bash # # To run it, just enter the following command: # ######################################################################################## #!/bin/bash NS=$1 if [[ -z $NS ]] then echo "Namespace is not specified, use onap namespace." NS="onap" fi echo "Create $NS config under config # # ./autoCreateOnapConfig.bash # ######################################################################################## #!/bin/bash echo "Create ONAP config under config directory..." cd ../config ./createConfig.sh -n onap cd - echo "...done : kubectl get namespace directory..." cd ../../config ./createConfig.sh -n $NS cd - echo "...done : kubectl get namespace ----------------------------------------------- >>>>>>>>>>>>>> k8s namespace" kubectl get namespace echo " ----------------------------------------------- >>>>>>>>>>>>>> helm : helm ls --all" helm ls --all echo " ----------------------------------------------- >>>>>>>>>>>>>> pod : kubectl get pods -n $NS -a" kubectl get pods -n $NS -a while true do echo "wait for $NS config pod reach to Completed STATUS" sleep 5 echo "-----------------------------------------------" kubectl get pods -n $NS -a status=`kubectl get pods -n $NS -a |grep config |xargs echo | cut --- >>>>>>>>>>>>>> k8s namespace" kubectl get namespace echo " ----------------------------------------------- >>>>>>>>>>>>>> helm : helm ls --all" helm ls --all echo " ----------------------------------------------- >>>>>>>>>>>>>> pod : kubectl get pods --all-namespaces -a" kubectl get pods --all-namespaces -a status=`kubectl get pods --all-namespaces -a |grep onap |xargs echo | cut -d' ' -f4` while true do echo "wait for onap config pod reach to Completed STATUS" sleep 5 echo "-----------------------------------------------" kubectl get pods --all-namespaces -a status=`kubectl get pods --all-namespaces -a |grep onap |xargs echo | cut -d' ' -f4` if [ "$status" = "Completed" ] then echo "onap config is Completed!!!" break fi done d' ' -f3` if [ "$status" = "Completed" ] then echo "$NS config is Completed!!!" break fi if [ "$status" = "Error" ] then echo "$NS config is failed with Error!!! POD logs are:" kubectl logs config -n $NS -f break fi done |
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
########################################################################################
# This script wraps {$OOM}/kubernetes/oneclick/deleteAll.sh script along with #
# the following steps to clean up ONAP configure: #
# - remove ONAP namespace #
# - remove ONAP release | ||||||||
Code Block | ||||||||
| ||||||||
######################################################################################## # This script wraps {$OOM}/kubernetes/oneclick/deleteAll.sh script along with # # the following steps to clean up ONAP configure: # # - remove ONAP namespace shared directory # # # # - remove ONAP release # # Before using it, do the following to prepare the bash file: - remove ONAP shared directory # # 1, cd {$OOM}/kumbernetes/oneclick/tools # # 2, vi autoCleanOnapConfig.bash # # 3, paste the full content here to autoCleanOnapConfig.bash file and save the file # # 4, chmod 777 autoCleanOnapConfig.bash # # Before using it, do the following to prepare the bash file: # # 1, cd {$OOM}/kumbernetes/oneclick # # 2, vi autoCleanOnapConfig.bash # # To run it, just enter the following command: # # 3, paste the full content here to autoCleanOnapConfig.bash file and save the file # # 4, chmod 777 ./autoCleanOnapConfig.bash # # To run it, just enter the following command: # ######################################################################################## #!/bin/bash NS=$1 if [[ -z $NS ]] then echo "Namespace is not specified, use onap namespace." NS="onap" fi echo "Clean up $NS configuration" cd .. ./deleteAll.bash -n $NS cd - echo "---------------------------------------------- Force remove namespace..." kubectl delete namespace #$NS # ./autoCleanOnapConfig.bash # ######################################################################################## #!/bin/bash ./deleteAll.bash -n onap echo "echo "...done : kubectl get namespace ----------------------------------------------- >>>>>>>>>>>>>> k8s namespace" kubectl get namespace while [[ ! -z `kubectl get namespace|grep $NS` ]] do echo "Wait for namespace $NS to be deleted ----------------------------------------------- >>>>>>>>>>>>>> k8s namespace" kubectl get namespace sleep 2 done echo "Force delete helm process ..." helm delete $NS-config --purge --debug echo "...done : helm ls --all ----------------------------------------------- Force remove namespace...>>>>>>>>>>>>>> helm" kubectlhelm delete namespace onap echo "...done" kubectl get namespacels --all echo "ForceRemove delete helm process $NS dockerdata..." helmsudo deleterm onap-configrf --purge --debug/dockerdata-nfs/onap echo "...done" helm ls --all echo "Remove ONAP dockerdata..." sudo rm -rf /dockerdata-nfs/onap echo "...done : ls -altr /dockerdata-nfs ----------------------------------------------- >>>>>>>>>>>>>> /dockerdata-nfs directory" ls -altr /dockerdata-nfs |
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
######################################################################################## # This script wraps {$OOM}/kubernetes/oneclick/createAll.sh script along with # # the following steps to deploy ONAP SDNC application: # # - wait until sdnc-0 is running properly with both (2) containers up # # # # Before using it, do the following to prepare the bash file: # # 1, cd {$OOM}/kumbernetes/oneclick/oneclick/tools # # 2, vi autoDeploySdnc.bash # # 3, paste the full content here to autoDeploySdnc.bash file and save the file # # 24, chmod vi777 autoDeploySdnc.bash # # # # 3, paste the full content here to autoDeploySdnc.bash file and save the file # # 4, chmod 777 autoDeploySdnc.bash # # To run it, just enter the following command: # # ./autoDeploySdnc.bash # ######################################################################################## #!/bin/bash cd .. echo "Deploy SDNC..." ./createAll.bash -n onap -a sdnc sdnc returnCode=$? echo "deploy result: $returnCode" cd - if [ "$returnCode" != "0" ] then echo "Abort..." exit fi echo "...done ----------------------------------------------- >>>>>>>>>>>>>> pod : kubectl get pods --all-namespaces -a -o wide" kubectl get pods --all-namespaces -a -o wide status=`kubectl get pods --all-namespaces -a |grep sdnc-0 |xargs echo | cut -d' ' -f3` while true do echo "wait for onap sdnc-0 reachs fully running" sleep 5 echo "-----------------------------------------------" kubectl get pods --all-namespaces -a -o wide status=`kubectl get pods --all-namespaces -a |grep sdnc-0 |xargs echo | cut -d' ' -f3` if [ "$status" = "2/2" ] then echo "onap sdnc-0 is running!!!" break fi done |
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
######################################################################################## # This script wraps {$OOM}/kubernetes/oneclick/deleteAll.sh script along with # # the following steps to un-deploy ONAP SDNC application fully: # # - force remove clusterrolebinding for onap-sdnc # # - force remove namespace for onap-sdnc # # - force remove release for onap-sdnc # # - wait until onap-sdnc namespace is remvoed # # # # Before using it, do the following to prepare the bash file: # # 1, cd {$OOM}/kumbernetes/oneclick /tools # # 2, vi autoCleanSdnc.bash # # 3, paste the full content here to autoCleanSdnc.bash file and save the file # # 4, chmod 777 autoCleanSdnc.bash # # # # To run it, just enter the following command: # # ./autoCleanSdnc.bash # ######################################################################################## #!/bin/bash cd .. ./deleteAll.bash -n onap -a sdnc cd - echo "---------------------------------------------- Remove clusterrolebindnig..." kubectl delete clusterrolebinding onap-sdnc-admin-binding echo "...done : kubectl get clusterrolebinding" kubectl get clusterrolebinding echo "Remove onap-sdnc namespace..." kubectl delete namespaces onap-sdnc echo "...done : kubectl get namespaces" kubectl get namespaces echo "Delete onap-sdnc release..." helm delete onap-sdnc --purge echo "...done: helm ls --all" helm ls --all sdncCount=`kubectl get namespaces | grep onap-sdnc | wc -l` while true do echo "wait for onap-sdnc namespace to be removed" sleep 5 echo "-----------------------------------------------" kubectl get namespaces sdncCount=`kubectl get namespaces | grep onap-sdnc | wc -l` if [ "$sdncCount" = "0" ] then echo "sdnc removed!!!" break fi done |