org.openecomp.resource.vl.overlaytunnel:
    derived_from: tosca.nodes.Root
    description: This entity represents abstract overlay tunnel end point.
    properties:
      id:
        type: string
        description: Identifier of the Tunnel Endpoint node.
        required: false
      template_name:
        type: string
        required: false
      version:
        type: string
        required: false
      name:
        type: string
        description: Overlay tunnel name used by for reference by the administrator.
        required: false
      description:
        type: string
        description: Additional comments/information about overlay tunnel.
        required: false
      tunnelType:
        type: string
        constraints:
          - valid_values: ['L3-DCI','L2-DCI']
        description: type defines if the overlay tunnel is L3-DCI tunnel or L2-DCI tunnel.
        required: true
      site1_id:
        type: string
        description: Identifier of first DCI overlay tunnel endpoint. This could be IP address of domain controller.
        required: true
      site1_description:
        type: string
        description: Additional comments/information about overlay tunnel. Description can also be used to identify domain controller.
        required: false
      site1_networkName:
        type: string
        description: Name of the network that is being associated with overlay tunnel.
        required: true
      site1_routerId:
        type: string
        description: Identifier of router connected to L3 tunnel end point, while configuring L3-DCI tunnel.
        required: false
      site1_importRT1:
        type: string
        description: List of Route targets imported by the local router.
        required: false
      site1_exportRT1:
        type: string
        description: List of Route targets exported by the local router.
        required: false
      site1_vni:
        type: integer
        description: VXLAN ID
        required: false
      site1_fireWallEnable:
        type: boolean
        required: false
        description: Identifies if a firewall exists in the path of overlay tunnel.
        default: false
      site1_fireWallId:
        type: string
        description: Identifier of Firewall that is in overlay tunnel path
        required: false
      site1_localNetworkAll:
        type: boolean
        description: Identifies whether all the local networks associate with the tunnel or not.
        required: false
        default: 'false'
      site2_id:
        type: string
        description: Identifier of second DCI overlay tunnel endpoint. This could be IP address of domain controller.
        required: true
      site2_description:
        type: string
        description: Additional comments/information about overlay tunnel. Description can also be used to identify domain controller.
        required: false
      site2_networkName:
        type: string
        description: Name of the network that is being associated with overlay tunnel.
        required: true
      site2_routerId:
        type: string
        description: Identifier of router connected to L3 tunnel end point, while configuring L3-DCI tunnel.
        required: false
      site2_importRT1:
        type: string
        description: List of Route targets imported by the local router.
        required: false
      site2_exportRT1:
        type: string
        description: List of Route targets exported by the local router.
        required: false
      site2_vni:
        type: integer
        description: VXLAN ID
        required: false
      site2_fireWallEnable:
        type: boolean
        required: false
        description: Identifies if a firewall exists in the path of overlay tunnel.
        default: false
      site2_fireWallId:
        type: string
        description: Identifier of Firewall that is in overlay tunnel path
        required: false
      site2_localNetworkAll:
        type: boolean
        description: Identifies whether all the local networks associate with the tunnel or not.
        required: false
        default: 'false'
    requirements:
    - virtualLink:
        capability: tosca.capabilities.network.Linkable
        relationship: tosca.relationships.network.LinksTo
    capabilities:
      virtual_linkable:
        type: tosca.capabilities.network.Linkable

org.openecomp.resource.vl.underlayvpn:
    derived_from: tosca.nodes.Root
    description: undelay vpn type definitions
    properties:
      id:
        type: string
        required: false
      template_name:
        type: string
        required: false
      version:
        type: string
        required: false
      vendor:
        type: string
        required: false
      template_author:
        type: string
        required: false
      name:
        type: string
        required: false
      description:
        type: string
        required: false
      serviceType:    
        type: string
        description: type of VPN service
        required: false
        default: 'l3vpn_sptn'
      topology:
        type: string
        description: type of VPN topology
        constraints:
          - valid_values: ['full-mesh','point_to_multipoint','point_to_point','singlePoint','hubspoke','hubspoke_via_hubce','hubspoke_disjoint','ADD_DROP_Z']
        required: false
        default: 'full-mesh'
      technology:
        type: string
        description: type of VPN technology
        constraints:
          - valid_values: ['mpls','rosen multivpn','vxlan overlay l3vpn','eth over sdh','vlan']
        required: false
        default: 'mpls'
      site1_name:       
        type: string
        description: name of first site
        required: false
      site2_name:       
        type: string
        description: name of second site
        required: false
      sna1_name:
        type: string
        description: name of site network accesses associated with the site1
        required: false
      sna2_name:
        type: string
        description: name of site network accesses associated with the site2  
        required: false
      pe1_id:    
        type: string
        description: id of provider edge1, it can be name or ip or uuid 
        required: false
      pe2_id:    
        type: string
        description: id of provider edge2, it can be name or ip or uuid 
        required: false
      ac1_id:
        type: string
        description: id of attachment circuit1, it can be port name or uuid    
        required: false
      ac1_svlan:
        type: integer
        description: ac1 svlan
        required: false
      ac1_ip:
        type: string
        description: ip of ac1, only for layer3 vpn, it should contain mask
        required: false
      ac1_peer_ip:
        type: string
        description: ip of ac1 peer CE tp, only for layer3 vpn, it should contain mask
        required: false
      ac1_route:
        type: string
        description: route configure of ac1, only for layer3 vpn    
        required: false
      ac1_protocol:
        type: string
        description: routing protocol type of ac1, only for layer3 vpn    
        constraints:
          - valid_values: ['STATIC','OSPF','ISIS','BGP','other']
        required: false    
      ac1_protocol_bgp_as:
        type: string
        description: autonomous-system number of ac1, , only required for ebgp protocol
        required: false                    
      ac2_id:
        type: string
        description: id of attachment circuit2, it can be port name or uuid  
        required: false    
      ac2_svlan:
        type: integer
        description: ac2 svlan
        required: false    
      ac2_ip:
        type: string
        description: ip of ac2, only for layer3 vpn, it should contain mask
        required: false    
      ac2_peer_ip:
        type: string
        description: ip of ac2 peer CE tp, only for layer3 vpn, it should contain mask
        required: false    
      ac2_route:
        type: string
        description: route configure of ac2, only for layer3 vpn
        required: false    
      ac2_protocol:
        type: string
        description: routing protocol type of ac2, only for layer3 vpn   
        constraints:
          - valid_values: ['STATIC','OSPF','ISIS','BGP','other']        
        default: 'STATIC'    
        required: false    
      ac2_protocol_bgp_as:
        type: string
        description: autonomous-system number of ac2, , only required for ebgp protocol        
        required: false    
      af_type:
        type: string
        description: address family type
        default: 'ipv4'
        required: false
    requirements:
    - virtualLink:
        capability: tosca.capabilities.network.Linkable
        relationship: tosca.relationships.network.LinksTo
    capabilities:
      virtual_linkable:
        type: tosca.capabilities.network.Linkable