...
Note: DMaaP should be setup for most of the test cases below.
# | Component(s) | Test Case | Status | Remarks |
---|
IT#001 | DCAE (SON Handler MS) | SON Handler Micro-service successfully on-boarded on to DCAE | |
|
IT#002 | DCAE (SON Handler MS) | SON Handler Micro-service's DB is up and the Micro-service is able to read/write data. | |
|
IT#003 | DCAE (SON Handler MS) | SON Handler Micro-service is able to successfully fetch config policies from Consul. | NOT YET TESTED |
|
IT#004 | OOF and Policy | OOF is able to successfully fetch config policy from Policy | |
|
IT#005 | DCAE (SON Handler MS) | SON Handler Micro-service is able to successfully receive a message over DMaaP containing PM/FM data (from VES Collector) | |
|
IT#006 | DCAE (SON Handler MS) and SDN-R | SON Handler Micro-service is able to successfully receive a message over DMaaP containing neighbor list update (from SDN-R) | |
|
IT#007 | DCAE (SON Handler MS) and Config DB | SON Handler Micro-service is able to successfully fetch neighbor list details from Config DB. | |
|
IT#008 | DCAE (SON Handler MS) and OOF | SON Handler Micro-service invokes REST API of OOF for PCI optimization | |
|
IT#009 | OOF and Config DB | OOF is able to obtain relevant neighbor list information for optimization algorithm from ConfigDB (REST API) | |
|
IT#010 | DCAE (SON Handler MS) and OOF | SON Handler Micro-service receives optimization result from OOF (via callback URL) and sends response | |
|
IT#011 | DCAE (SON Handler MS) and Config DB | SON Handler Micro-service is able to successfully fetch PNF details from Config DB | |
|
IT#012 | DCAE (SON Handler MS) and Policy | SON Handler Micro-service is able to send PCI/neighbor list updates via DMaaP to Policy | |
|
IT#013 | Policy and SDN-R | Policy is able to successfully send a DMaaP message (to SDN-R) with PCI/neighbor list updates. | |
|
IT#014 | Policy and SDN-R | Policy is able to successfully receive a DMaaP message (from SDN-R) with PCI/neighbor list update response | |
|
IT#015 | DCAE (SON Handler MS) and Policy | SON Handler Micro-service is able to receive PCI/neighbor list update response via DMaaP from Policy, process it and logs the results. | |
|
IT#016 | DCAE (SON Handler MS) | SON Handler Micro-service is able to process PM KPI data, store as needed, and apply rules to recommend removal of a neighbor relationship. | |
IT#017 | ConfigDB | ConfigDB established with Dublin enhancements (update single cell's details) | | IT#018 | SDN-R | SDN-R receives netconf notification, updates ConfigDB for neighbor list change | | IT#019
|
IT#017 | SDN-R | Upon receiving message from Policy, SDN-R sends netconf message to RAN-Sim. | |
IT#020
|
IT#018 | DCAE (VES Collector) | VES Collector receives VES messages from RAN-Simulator | |
|
Test Case ID | IT#001 |
Test Case Name | SON Handler Micro-service on-boarding |
Description | SON Handler Micro-service is successfully on-boarded on to DCAE |
Release | Dublin |
Pre-conditions | (a) DCAE up and running (b) DCAE CLI available |
Testing Steps |
Steps | Expected Result | - SON-Handler component spec validated.
- SON-Handler is brought up manually on DCAE.
- SON-Handler Blueprint validated successfully.
- DCAE is brought online.
| - SON-Handler comes up online and is stable.
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#002 |
Test Case Name | SON-Handler Micro-service DB on-boarding |
Description | SON-Handler Micro-service's PG DB is up, and SON-Handler Micro-service is able to write data e.g., local configuration data and read it. |
Release | Dublin |
Pre-conditions | (a) SON-Handler MS is up and running |
Testing Steps |
Steps | Expected Result | - SON-Handler component and its DB is on-boarded on to DCAE.
- Local configurable attributes are written/read by SON-Handler MS (verified by viewing logs)
| - Verify DB working by viewing SON-Handler MS logs.
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#003 |
Test Case Name | Policy fetch by SON-Handler MS |
Description | SON Handler Micro-service is able to successfully fetch config policies from Consul. |
Release | Dublin |
Pre-conditions | (a) SON-Handler MS is up and running (b) DCAE Platform including Consul is up and running |
Testing Steps |
Steps | Expected Result | - Upload config policies for SON-Handler MS.
- SON-Handler MS should fetch the policies from Consul
| - Verify Policy fetch and store via logs and checking in PG DB
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#004 |
Test Case Name | Policy fetch by OOF |
Description | OOF is able to successfully fetch the config policies from Policy |
Release | Dublin |
Pre-conditions | (a) Policy component is up and running (b) Config policies related to OOF are provisioned in Policy component |
Testing Steps |
Steps | Expected Result | - Bring up the OOF using the installation steps.
- Check the OOF database to see the contents of the OOF config policy for PCI optimization use case (i.e., OOF should invoke Policy API to fetch the config policies).
| - OOF comes online and the database and local datastructures for PCI optimization use case are initialized correctly.
- Config-policy is correctly fetched and stored in the OOF DB. Sample config policy contents are given below:
ALGO_CATEGORY:OOF-PCI-OPTIMIZATION PCI_OPTMIZATION_ALGO_NAME:OOF-PCI-OPTIMIZATION-LEVEL1 PCI_OPTIMIZATION_NW_CONSTRAINT:MAX5PCICHANGESONLY PCI_OPTIMIZATION_PRIORITY: 2 PCI_OPTIMIZATION_TIME_CONSTRAINT:NONE
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#005 |
Test Case Name | VES (DMaaP) interaction with SON-Handler MS |
Description | SON Handler Micro-service is able to successfully receive a message over DMaaP containing PM/FM data (from VES Collector). |
Release | Dublin |
Pre-conditions | (a) DCAE platform is up and running, VES is online (b) SON-Handler MS is online (c) DMaaP is up |
Testing Steps |
Steps | Expected Result | - Ensure relevant DMaaP topics are created (SEC_FAULT_OUTPUT, SEC_MEASUREMENT_OUTPUT), along with producer and consumers (using unauthenticated mode)
- Post a fault message (REST) to VES Collector. If feasible, use the RAN-Simulator to post the fault message.
- Post a performance measurements message (REST) to VES Collector. If feasible, use the RAN-Simulator to post the fault message.
| - VES Collector posts the received fault message on to DMaaP using the topic SEC_FAULT_OUTPUT.
- SON-Handler MS receives the DMaaP SEC_FAULT_OUTPUT message and processes it - verified via logs.
- VES Collector posts the received PM message on to DMaaP using the topic SEC_MEASUREMENT_OUTPUT.
- SON-Handler MS receives the DMaaP SEC_MEASUREMENT_OUTPUT message and processes it - verified via logs.
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#006 |
Test Case Name | SDN-R (DMaaP) interaction with SON-Handler MS |
Description | SON Handler Micro-service is able to successfully receive a message over DMaaP containing neighbor list update from SDN-R |
Release | Dublin |
Pre-conditions | (a) DCAE platform is up and running (b) SON-Handler MS is online (c) DMaaP is up |
Testing Steps |
Steps | Expected Result | - Ensure relevant DMaaP topics are created (PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT), along with producer and consumers (using unauthenticated mode).
- Post a neighbor-list change notification message (topic: PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT) on DMaaP either manually (or) using SDN-R (if online) and RAN-Simulator (or) using SDN-R (if online) and a netconf server
| - SON-Handler MS receives the DMaaP PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT message and processes it - verified via logs and DB contents
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#007 |
Test Case Name | Config DB interaction with SON-Handler MS for neighbor details |
Description | SON Handler Micro-service is able to successfully fetch neighbor list details from Config DB. |
Release | Dublin |
Pre-conditions | (a) DCAE platform is up and running (b) SON-Handler MS is online (c) IT#006 is completed |
Testing Steps |
Steps | Expected Result | - Bring up ConfigDB using the installation steps. Pre-populate RAN topology data in ConfigDB using a configuration file.
- Post a neighbor-list change notification message (topic: PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT) on DMaaP as done for IT#006.
| - SON-Handler MS receives the DMaaP PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT message and invokes ConfigDB APIs to obtain neighbor list details for cluster formation and determination of collisions and confusions (verified via logs).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#008 |
Test Case Name | OOF trigger for PCI optimization |
Description | SON Handler Micro-service invokes REST API of OOF for PCI optimization |
Release | Dublin |
Pre-conditions | (a) DCAE platform is up and running (b) SON-Handler MS is online (c) OOF is online (d) IT#004 is completed. (e) IT#005 or IT#006 is completed |
Testing Steps |
Steps | Expected Result | - Post a neighbor-list change notification message (topic: PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT) on DMaaP as done for IT#006 (or) post a DMaaP SEC_FAULT_OUTPUT message as done for IT#005. In either case, the message contents should be such that the number of resulting collisions/confusions should be more than the threshold for triggering OOF for PCI optimization.
| - SON-Handler MS receives the DMaaP message and processes it.
- After determining that the number of collisions/confusions is greater than the threshold for triggering OOF, SON-Handler triggers OOF for PCI optimization (verified by logs on SON-Handler MS and OOF sides).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#009 |
Test Case Name | Config DB interaction with OOF |
Description | OOF is able to obtain relevant neighbor list information for optimization algorithm from ConfigDB (REST API) |
Release | Dublin |
Pre-conditions | (a) OOF is online (b) ConfigDB is up and running |
Testing Steps |
Steps | Expected Result | - Configure Config-DB with the RAN topology information using a configuration file.
- If IT#008 is completed, either post a neighbor-list change notification message (topic: PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT) on DMaaP as done for IT#006 (or) post a DMaaP SEC_FAULT_OUTPUT message as done for IT#005, else, invoke OOF's REST API for PCI optimization.
| - OOF receives PCI optimization request, and invokes ConfigDB APIs to obtain information about the neighbors for executing the PCI optimization algorithm (verified by logs).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#010 |
Test Case Name | OOF response for PCI optimization |
Description | SON Handler Micro-service receives optimization result from OOF (via callback URL) and sends response |
Release | Dublin |
Pre-conditions | (a) DCAE platform is up and running (b) SON-Handler MS is online (c) OOF is online (d) IT#008 and IT#009 are completed. |
Testing Steps |
Steps | Expected Result | - Post a neighbor-list change notification message (topic: PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT) on DMaaP as done for IT#006 (or) post a DMaaP SEC_FAULT_OUTPUT message as done for IT#005. In either case, the message contents should be such that the number of resulting collisions/confusions should be more than the threshold for triggering OOF for PCI optimization.
| - SON-Handler MS receives the DMaaP message and triggers OOF for PCI optimization (verified by logs on SON-Handler MS and OOF sides).
- OOF executes PCI optimization algorithm and provides the result to SON-Handler MS using the callback URL (verified by logs on OOF and SON-Handler MS sides).
- SON-Handler MS sends a response to OOF (verified by logs).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#011 |
Test Case Name | Config DB interaction with SON-Handler MS for PNF details |
Description |
|
Release | Dublin |
Pre-conditions | (a) DCAE platform is up and running (b) SON-Handler MS is online (c) OOF is online (d) IT#010 is completed. |
Testing Steps |
Steps | Expected Result | - Post a neighbor-list change notification message (topic: PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT) on DMaaP as done for IT#006 (or) post a DMaaP SEC_FAULT_OUTPUT message as done for IT#005. In either case, the message contents should be such that the number of resulting collisions/confusions should be more than the threshold for triggering OOF for PCI optimization.
Note: In case this test case has to be done independent of OOF (i.e., IT#009 and IT#010), then upon completion of IT#008, the callback URL of SON-Handler MS can be invoked manually.
| - SON-Handler MS receives PCI-optimization results via the callback URL (verified by logs on OOF and SON-Handler MS sides).
- SON-Handler MS then invokes ConfigDB API for obtaining PNF names corresponding to the cells whose PCI values have been modified by OOF (verified by logs on Config DB and SON-Handler MS sides).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#012 |
Test Case Name | SON-Handler MS interaction with Policy (DMaaP) for PCI updates |
Description | SON Handler Micro-service is able to send PCI/neighbor list updates via DMaaP to Policy |
Release | Dublin |
Pre-conditions | (a) DCAE platform is up and running (b) SON-Handler MS is online (c) Policy is online (d) IT#011 is completed. |
Testing Steps |
Steps | Expected Result | - Ensure that the DMaaP topic DCAE_CL_OUTPUT is created, and producers/consumers are registered.
- Post a neighbor-list change notification message (topic: PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO_OUTPUT) on DMaaP as done for IT#006 (or) post a DMaaP SEC_FAULT_OUTPUT message as done for IT#005. In either case, the message contents should be such that the number of resulting collisions/confusions should be more than the threshold for triggering OOF for PCI optimization.
| - SON-Handler MS receives PCI optimization results via the callback URL.
- SON-Handler MS then prepares and sends a DMaaP message (topic: DCAE_CL_OUTPUT) to Policy (verified by logs) for the required PCI changes.
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#013 |
Test Case Name | Policy interaction with SDN-R (DMaaP) for PCI updates |
Description | Policy is able to successfully send a DMaaP message (to SDN-R) with PCI/neighbor list updates. |
Release | Dublin |
Pre-conditions | (a) SON-Handler MS is online (b) Policy is online
|
Testing Steps |
Steps | Expected Result | - Ensure that the DMaaP topics DCAE_CL_OUTPUT and SDNR_CL are created, and producers/consumers are registered.
- Implement the steps for IT#012, if IT#012 is not completed, post a DMaaP message with topic DCAE_CL_OUTPUT containing details of PCI/neighbor list updates.
| - Policy receives the DMaaP message with topic DCAE_CL_OUTPUT and invokes a control loop (verified by by checking active control loops).
- Policy then sends a DMaaP message to SDN-R with topic SDNR-CL containing the relevant contents received in the DCAE_CL_OUTPUT message (verified by logs).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#014 |
Test Case Name | Policy interaction with SDN-R (DMaaP) for PCI update response |
Description | Policy is able to successfully receive a DMaaP message (from SDN-R) with PCI/neighbor list update response |
Release | Dublin |
Pre-conditions | (a) SON-Handler MS is online (b) Policy is online (c) IT#013 is completed |
Testing Steps |
Steps | Expected Result | - Ensure that the DMaaP topic SDNR-CL-RSP is created, and producers/consumers are registered.
- If SDN-R is not integrated for IT#013, post a DMaaP message with topic SDNR_CL_RSP containing details of success/failure of PCI/neighbor updates
| - Policy receives the DMaaP message with topic SDNR_CL_RSP and sends a DMaaP message to SON-Handler MS with topic DCAE_CL_RSP (verified by logs).
- The control loop is also no longer active (verified by checking active control loops).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#015 |
Test Case Name | Policy interaction with SON-Handler MS (DMaaP) for PCI update response |
Description | SON Handler Micro-service is able to receive PCI/neighbor list update response via DMaaP from Policy, process it and logs the results. |
Release | Dublin |
Pre-conditions | (a) SON-Handler MS is online (b) Policy is online (c) IT#014 is completed |
Testing Steps |
Steps | Expected Result | - Ensure that the DMaaP topic DCAE_CL_RSP is created, and producers/consumers are registered.
- Execute the steps in IT#014.
| - SON-Handler MS receives the DMaaP message with topic DCAE_CL_RESPONSE from Policy, processes it and logs the relevant information about the failure/success of the PCI/neighbor changes in the RAN.
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#016 |
Test Case Name | ANR update by SON-Handler MS |
Description | SON Handler Micro-service is able to process PM KPI data, store as needed, and apply rules to recommend removal of a neighbor relationship. |
Release | Dublin |
Pre-conditions | (a) SON-Handler MS is online (b) Policy is online (c) IT#005, IT#007 and IT#011 are completed |
Testing Steps |
Steps | Expected Result | - Ensure SEC_MEASUREMENT_OUTPUT and DCAE_CL_OUTPUT DMaaP topics are created, along with producer and consumers (using unauthenticated mode)
- Post a sequence of PM messages (REST) to VES Collector. If feasible, use the RAN-Simulator to post the PM message.
| - SON-Handler MS receives the DMaaP messages with topic SEC_MEASUREMENT_OUTPUT from VES Collector.
- SON-Handler MS stores the information as needed, processes and determines neighbors to be removed based on the handover metrics.
- SON-Handler MS then sends a DMaaP message with topic DCAE_CL_OUTPUT to Policy containing details of the neighbors to be removed (verified via logs).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
Test Case ID | IT#017 |
Test Case Name |
ConfigDB updates | Description | ConfigDB established with Dublin enhancements (update single cell's details) |
Release | Dublin |
Pre-conditions | (a) Config DB is online and populated with RAN topology details |
Testing Steps | Steps | Expected Result |
- Invoke the ConfigDB API to update single cell's details - this can be done manually or by executing the steps for IT#013.
| - ConfigDB updates the details of the cell as received in the API request (verified by viewing the DB contents).
|
Netconf interface of SDN-R (edit-config) |
Description | Upon |
Conclusion (Pass /Fail) | Testing Lab | Winlab |
Test Case ID | IT#018 |
Test Case Name | Netconf interface of SDN-R (notification) |
Description | SDN-R receives netconf notification, updates ConfigDB for neighbor list change |
Release | Dublin |
Pre-conditions | (a) Config DB is online and populated with RAN topology details (b) SDN-R is up and running (c) (RAN) devices are mounted on to SDN-R |
Testing Steps | Steps | Expected Result |
- Send a netconf message for neighbor list change to SDN-R. This may be done using a netconf server, or using the RAN-Simulator.
| - SDN-R receives the netconf message successfully (verified via logs).
- SDN-R processes the message and updates ConfigDB with the received neighbor list updates (verified by viewing ConfigDB contents).
|
Conclusion (Pass /Fail) | Testing Lab | Winlab |
Test Case ID | IT#019 |
Test Case Name | Netconf interface of SDN-R (edit-config) |
Description | Upon receiving message from Policy, SDN-R sends netconf message to RAN-Sim. |
Release | Dublin |
Pre-conditions | (a) SDN-R is up and running (b) (RAN) devices are mounted on to SDN-R |
Testing Steps |
Steps | Expected Result | - Send a DMaap message to SDN-R with topic SDNR-CL containing details of PCI/neighbor list updates. This can be done by executing the steps for IT#013, or by manually sending a DMaaP message (after ensuring DMaaP topic creation, and registration of producer/consumer).
| - SDN-R successfully receives the DMaaP message with topic SDNR-CL (verified via logs).
- SDN-R sends a netconf edit-config message to RAN-Sim (or netconf server) with details of the PCI/neighbor updates.
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |
IT#020IT#018 |
Test Case Name | VES Collector interface with RAN |
Description | VES Collector receives VES messages from RAN-Simulator |
Release | Dublin |
Pre-conditions | (a) DCAE Platform including VES-Collector is up and running. (b) RAN-Simulator is up and running |
Testing Steps |
Steps | Expected Result | - Modify the neighbor list via RAN-Sim GUI. This triggers a VES fault message (REST) from the RAN-Sim towards the VES collector.
- Initiate reporting of PM metrics via RAN-Sim GUI. This triggers periodic VES PM messages (REST) from the RAN-Sim towards the VES collector.
| - VES Collector successfully receives the fault message (verified via logs).
- VES Collector successfully receives the PM messages (verified via logs).
|
|
Conclusion (Pass /Fail) |
|
Testing Lab | Winlab |