Page History

Attribute Name

Type

Mult.

Description

additionalFields

HashMap

0..1

Additional pnfRegistration fields if needed

lastServiceDate

String

0..1

TS 32.692 dateOfLastService = date of last service; e.g. 15022017

macAddress

String

0..1

MAC address of OAM interface of the unit

manufactureDate

String

0..1

TS 32.692 dateOfManufacture = manufacture date of the unit; 24032016

pnfRegistrationFieldsVersion

String

1

Version of the registrationFields block as "#.#" where # is a digit; see section 1 for the correct digits to use.

unitFamily

String

0..1

TS 32.692 vendorUnitFamilyType = general type of HW unit; e.g. BBU

domain

Domain

1

Event domain enumeration: 'fault', 'heartbeat', 'measurement', 'mobileFlow', 'notification', 'other', 'pnfRegistration', 'sipSignaling', 'stateChange', 'syslog', 'thresholdCrossingAlert', 'voiceQuality'

eventType

String

0..1

For example: 'applicationNf', 'guestOS', 'hostOS', 'platform'

lastEpochMicrosec

Number

1

the latest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds

nfcNamingCode

String

0..1

Network function component type: 3 characters (aligned with vfc naming standards)

nfNamingCode

String

0..1

Network function type: 4 characters (aligned with vnf and pnf naming standards)

nfVendorName

String

1

Network function vendor name

priority

Priority

1

Processing priority enumeration: 'High', 'Medium', 'Normal', 'Low'

reportingEntityId

String

0..1

UUID identifying the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. (Note: the AT&T internal enrichment process shall ensure that this field is populated). The reportingEntityId is an id for the reportingEntityName. See 'reportingEntityName' for more information.

reportingEntityId - UUID identifying the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem.   Note: the AT&T internal enrichment process shall ensure that this field is populated. The reportingEntityId is an id for the reportingEntityName. See reportingEntityName for more information.

reportingEntityName

String

1

Name of the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

reportingEntityName - Name of the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

sequence

Integer

1

Ordering of events communicated by an event source instance (or 0 if not needed)

sequence - Ordering of events communicated by an event source instance (or 0 if not needed)

sourceId

String

0..1

sourceId - UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity   Note: the AT&T internal enrichment process shall ensure that this field is populate). The sourceId is an id for the sourceName. See sourceName for more information.

UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity (note: the AT&T internal enrichment process shall ensure that this field is populated). The sourceId is an id for the sourceName. See 'sourceName' for more information.

startingEpochMicrosec

Number

1

startEpochMicrosec - the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…).   For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpochMicrosec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and DCAE collector will replace it with Collector time stamp (when event is received).

the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…). For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpoch Microsec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and the VES collector will replace it with Collector time stamp (when the event is received)

timeZoneOffset

String

0..1

Offset to GMT to indicate local time zone for device formatted as 'UTC+/-hh:mm'; see https://en.wikipedia.org/wiki/List_of_time_zone_abbreviations for UTC offset examples

version

String

1

Version of the event header as "#.#" where # is a digit; see section 1 for the correct digits to use.

vesEventListenerVersion

String

1

Version of the ves event listener api spec that this event is compliant with (as "#" or "#.#" or "#.#.#" where # is a digit; see section 1 for the correct digits to use).

name

String

1

Status

String

0..1

The current condition of an interaction, such as open, in research, closed, and so forth

description

String

0..1

Defines a textual free-form description of the object.

id

Identifier

1

Unambiguously distinguishes different object instances. It is the naming attribute of the object.

Identifier of this information element.   This attribute shall be globally unique.