Table of Contents |
---|
Overview
For ONAP SDN-R load and stress test and Proof of concept, June 19 a three node SDN-R cluster is used. Version is El Alto.
...
draw.io Diagram | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OpenStack Preparation
Required Security Groups Rules
Installing Kubernetes and Rancher
Create the Rancher 3 nodes control cluster named as onap-control on OpenStack
The following instructions describe how to create 3 OpenStack VMs to host the Highly-Available Kubernetes Control Plane. ONAP workloads will not be scheduled on these Control Plane nodes.
Launch new VMs in OpenStack.
Select Ubuntu 20.04 as the boot image for the virtual machine without any volume
Select m4.large flavor
Networking
Apply customization script for Control Plane VMs
The script to be copied:
Code Block |
---|
#!/bin/bash DOCKER_VERSION=19.03.15 sudo apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh cat > /etc/docker/daemon.json << EOF { "insecure-registries" : [ "nexus3.onap.org:10001" ], "log-driver": "json-file", "log-opts": { "max-size": "1m", "max-file": "9" }, "mtu": 1450, "ipv6": true, "fixed-cidr-v6": "2001:db8:1::/64", "registry-mirrors": ["https://nexus3.onap.org:10001"] } EOF sudo usermod -aG docker ubuntu sudo systemctl daemon-reload sudo systemctl restart docker sudo apt-mark hold docker-ce IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'` HOSTNAME=`hostname` echo "$IP_ADDR $HOSTNAME" >> /etc/hosts docker login -u docker -p docker nexus3.onap.org:10001 sudo apt-get install make -y #nfs server sudo apt-get install nfs-kernel-server -y sudo mkdir -p /dockerdata-nfs sudo chown nobody:nogroup /dockerdata-nfs/ exit 0 |
...
- Update Ubuntu
- Install docker and hold the docker version to 19.03.15
- set hosts file with IP and hostname
- install nfs-kernel-server
Launched Instances
Create the Kubernetes 12 nodes worker cluster named as onap-workers on OpenStack cloud
The following instructions describe how to create OpenStack VMs to host the Highly-Available Kubernetes Workers. ONAP workloads will only be scheduled on these nodes.
Launch new VM instances in OpenStack
Select Ubuntu 20.04 as base image
Select Flavor
The size of Kubernetes hosts depend on the size of the ONAP deployment being installed.
If a small subset of ONAP applications are being deployed (i.e. for testing purposes), then 16GB or 32GB may be sufficient.
Networking
Apply customization script for Kubernetes VM(s)
The scrip to be copied:
Code Block |
---|
#!/bin/bash DOCKER_VERSION=19.03.15 sudo apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh cat > /etc/docker/daemon.json << EOF { "insecure-registries" : [ "nexus3.onap.org:10001" ], "log-driver": "json-file", "log-opts": { "max-size": "1m", "max-file": "9" }, "mtu": 1450, "ipv6": true, "fixed-cidr-v6": "2001:db8:1::/64", "registry-mirrors": ["https://nexus3.onap.org:10001"] } EOF sudo usermod -aG docker ubuntu sudo systemctl daemon-reload sudo systemctl restart docker sudo apt-mark hold docker-ce IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'` HOSTNAME=`hostname` echo "$IP_ADDR $HOSTNAME" >> /etc/hosts docker login -u docker -p docker nexus3.onap.org:10001 sudo apt-get install make -y # install nfs sudo apt-get install nfs-common -y exit 0 |
...
- Update Ubuntu
- Install docker and hold the docker version to 19.03.15
- insert hostname and IP in the hosts file
- install nfs common
Launched onap-workers instances
Configure Rancher Kubernetes Engine
Install RKE
Download and install RKE on the onap-control-01 VM. Binaries can be found here for Linux and Mac: https://github.com/rancher/rke/releases/download/v1.2.7/
...
Code Block |
---|
# An example of an HA Kubernetes cluster for ONAP nodes: - address: 10.31.4.11 port: "22" role: - controlplane - etcd hostname_override: "onap-control-01" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.12 port: "22" role: - controlplane - etcd hostname_override: "onap-control-02" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.13 port: "22" role: - controlplane - etcd hostname_override: "onap-control-03" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.21 port: "22" role: - worker hostname_override: "onap-workers-01" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.22 port: "22" role: - worker hostname_override: "onap-workers-02" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.23 port: "22" role: - worker hostname_override: "onap-workers-03" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.24 port: "22" role: - worker hostname_override: "onap-workers-04" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.25 port: "22" role: - worker hostname_override: "onap-workers-05" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.26 port: "22" role: - worker hostname_override: "onap-workers-06" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.27 port: "22" role: - worker hostname_override: "onap-workers-07" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.28 port: "22" role: - worker hostname_override: "onap-workers-08" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.29 port: "22" role: - worker hostname_override: "onap-workers-09" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" - address: 10.31.4.30 port: "22" role: - worker hostname_override: "onap-workers-10" user: ubuntu ssh_key_path: "~/.ssh/id_ecdsa" services: kube-api: service_cluster_ip_range: 10.43.0.0/16 pod_security_policy: false always_pull_images: false kube-controller: cluster_cidr: 10.42.0.0/16 service_cluster_ip_range: 10.43.0.0/16 kubelet: cluster_domain: cluster.local cluster_dns_server: 10.43.0.10 fail_swap_on: false network: plugin: canal authentication: strategy: x509 ssh_key_path: "~/.ssh/id_ecdsa" ssh_agent_auth: false authorization: mode: rbac ignore_docker_version: false kubernetes_version: "v1.19.9-rancher1-1" private_registries: - url: nexus3.onap.org:10001 user: docker password: docker is_default: true cluster_name: "onap" restore: restore: false snapshot_name: "" |
Prepare cluster.yml
Before this configuration file can be used the IP address must be mapped for each control and worker node in this file.
Run RKE
From within the same directory as the cluster.yml file, simply execute:
...
Code Block |
---|
ubuntu@onap-control-01:~/rke$ ./rke up INFO[0000] Running RKE version: v1.2.7 INFO[0000] Initiating Kubernetes cluster INFO[0000] [dialer] Setup tunnel for host [10.31.4.26] INFO[0000] [dialer] Setup tunnel for host [10.31.4.29] INFO[0000] [dialer] Setup tunnel for host [10.31.4.24] INFO[0000] [dialer] Setup tunnel for host [10.31.4.27] INFO[0000] [dialer] Setup tunnel for host [10.31.4.25] INFO[0000] [dialer] Setup tunnel for host [10.31.4.11] INFO[0000] [dialer] Setup tunnel for host [10.31.4.22] INFO[0000] [dialer] Setup tunnel for host [10.31.4.30] INFO[0000] [dialer] Setup tunnel for host [10.31.4.21] INFO[0000] [dialer] Setup tunnel for host [10.31.4.13] INFO[0000] [dialer] Setup tunnel for host [10.31.4.28] INFO[0000] [dialer] Setup tunnel for host [10.31.4.12] INFO[0000] [dialer] Setup tunnel for host [10.31.4.23] . . . . . . . . . . . . INFO[0236] [sync] Successfully synced nodes Labels and Taints INFO[0236] [network] Setting up network plugin: canal INFO[0236] [addons] Saving ConfigMap for addon rke-network-plugin to Kubernetes INFO[0236] [addons] Successfully saved ConfigMap for addon rke-network-plugin to Kubernetes INFO[0236] [addons] Executing deploy job rke-network-plugin INFO[0241] [addons] Setting up coredns INFO[0241] [addons] Saving ConfigMap for addon rke-coredns-addon to Kubernetes INFO[0241] [addons] Successfully saved ConfigMap for addon rke-coredns-addon to Kubernetes INFO[0241] [addons] Executing deploy job rke-coredns-addon INFO[0251] [addons] CoreDNS deployed successfully INFO[0251] [dns] DNS provider coredns deployed successfully INFO[0251] [addons] Setting up Metrics Server INFO[0251] [addons] Saving ConfigMap for addon rke-metrics-addon to Kubernetes INFO[0251] [addons] Successfully saved ConfigMap for addon rke-metrics-addon to Kubernetes INFO[0251] [addons] Executing deploy job rke-metrics-addon INFO[0256] [addons] Metrics Server deployed successfully INFO[0256] [ingress] Setting up nginx ingress controller INFO[0256] [addons] Saving ConfigMap for addon rke-ingress-controller to Kubernetes INFO[0257] [addons] Successfully saved ConfigMap for addon rke-ingress-controller to Kubernetes INFO[0257] [addons] Executing deploy job rke-ingress-controller INFO[0262] [ingress] ingress controller nginx deployed successfully INFO[0262] [addons] Setting up user addons INFO[0262] [addons] no user addons defined INFO[0262] Finished building Kubernetes cluster successfully |
Validate RKE deployment
copy the file "kube_config_cluster.yml" to .kube directory on home of onap-control-01 VM.
...
Perform these above operations on all control nodes as well as worker nodes to run kubectl and helm commands
Create "onap" namespace and set that as default in kubernetes.
Code Block |
---|
ubuntu@onap-control-01:~$ kubectl create namespace onap
ubuntu@onap-control-01:~$ kubectl config set-context --current --namespace=onap |
Verify the kubernetes cluster
Code Block |
---|
ubuntu@onap-control-1:~$ kubectl get nodes -o=wide |
Result:
Install Helm
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
ubuntu@onap-control-01:~$ wget https://get.helm.sh/helm-v3.5.2-linux-amd64.tar.gz ----- ubuntu@onap-control-01:~$ wget https://get.helm.sh/helmtar -zxvf helm-v3.5.2-linux-amd64.tar.gz ubuntu@onap--2021-06-14 16:25:08-- https://get.helm.sh/helm-v3.5.2-linux-amd64.tar.gz Resolving get.helm.sh (get.helm.sh)... 152.195.19.97, 2606:2800:11f:1cb7:261b:1f9c:2074:3c Connecting to get.helm.sh (get.helm.sh)|152.195.19.97|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 12365365 (12M) [application/x-tar] Saving to: ‘helm-v3.5.2-linux-amd64.tar.gz’ helm-v3.5.2-linux-amd64.tar.gz control-01:~$ sudo mv linux-amd64/helm /usr/local/bin/helm |
Initialize Kubernetes Cluster for use by Helm
Perform this on onap-control-1 VM only during the first setup.
Create folder for local charts repository on onap-control-01.
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ mkdir charts; chmod -R 777 charts
|
Run a docker server to serve local charts
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ docker run -d -p 8080:8080 -v $(pwd)/charts:/charts -e DEBUG=true -e STORAGE=local -e STORAGE_LOCAL_ROOTDIR=/charts chartmuseum/chartmuseum:latest |
Install helm chartmuseum plugin
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ helm plugin install https://github.com/chartmuseum/helm-push.git |
Setting up the NFS share for multinode kubernetes cluster:
Deploying applications to a Kubernetes cluster requires Kubernetes nodes to share a common, distributed filesystem. In this tutorial, we will setup an NFS Master, and configure all Worker nodes a Kubernetes cluster to play the role of NFS slaves.
It is recommneded that a separate VM, outside of the kubernetes cluster, be used. This is to ensure that the NFS Master does not compete for resources with Kubernetes Control Plane or Worker Nodes.
Launch new NFS Server VM instance
Select Ubuntu 18.04 as base image
Select Flavor
Networking
Apply customization script for NFS Server VM
Script to be added:
Code Block |
---|
#!/bin/bash DOCKER_VERSION=18.09.5 export DEBIAN_FRONTEND=noninteractive apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh cat > /etc/docker/daemon.json << EOF { "insecure-registries" : [ "nexus3.onap.org:10001","10.20.6.10:30000" ], "log-driver": "json-file", "log-opts": { "max-size": "1m", 100%[===============================================================================================================>] 11.79M --.-KB/s in 0.07s 2021-06-14 16:25:08 (169 MB/s) - ‘helm-v3.5.2-linux-amd64.tar.gz’ saved [12365365/12365365] ubuntu@onap-control-01:~$ |
Initialize Kubernetes Cluster for use by Helm
Perform this on onap-control-1 VM only during the first setup.
Code Block |
---|
kubectl -n kube-system create serviceaccount tiller
kubectl create clusterrolebinding tiller --clusterrole=cluster-admin --serviceaccount=kube-system:tiller
helm init --stable-repo-url https://charts.helm.sh/stable --service-account tiller
kubectl -n kube-system rollout status deploy/tiller-deploy
helm repo remove stable
|
Perform this on the other onap-control nodes:
Code Block | ||||
---|---|---|---|---|
| ||||
helm init --stable-repo-url https://charts.helm.sh/stable --client-only
helm repo remove stable |
Setting up the NFS share for multinode kubernetes cluster:
Deploying applications to a Kubernetes cluster requires Kubernetes nodes to share a common, distributed filesystem. In this tutorial, we will setup an NFS Master, and configure all Worker nodes a Kubernetes cluster to play the role of NFS slaves.
It is recommneded that a separate VM, outside of the kubernetes cluster, be used. This is to ensure that the NFS Master does not compete for resources with Kubernetes Control Plane or Worker Nodes.
Launch new NFS Server VM instance
Select Ubuntu 18.04 as base image
Select Flavor
Networking
Apply customization script for NFS Server VM
Script to be added:
Code Block |
---|
#!/bin/bash
DOCKER_VERSION=18.09.5
export DEBIAN_FRONTEND=noninteractive
apt-get update
curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
cat > /etc/docker/daemon.json << EOF
{
"insecure-registries" : [ "nexus3.onap.org:10001","10.20.6.10:30000" ],
"log-driver": "json-file",
"log-opts": {
"max-size": "1m",
"max-file": "9"
},
"mtu": 1450,
"ipv6": true,
"fixed-cidr-v6": "2001:db8:1::/64",
"registry-mirrors": ["https://nexus3.onap.org:10001"]
}
EOF
sudo usermod -aG docker ubuntu
systemctl daemon-reload
systemctl restart docker
apt-mark hold docker-ce
IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
HOSTNAME=`hostname`
sudo echo "$IP_ADDR $HOSTNAME" >> /etc/hosts
docker login -u docker -p docker nexus3.onap.org:10001
sudo apt-get install make -y
# install nfs
sudo apt-get install nfs-common -y
sudo apt update
exit 0
|
This customization script will:
- Install docker and hold the docker version to 18.09.5
- insert hostname and IP address of the onap-nfs-server in the hosts file
- install nfs server
Resulting example
Configure NFS Share on Master node
Login into onap-nfs-server and perform the below commands
"max-file": "9"
},
"mtu": 1450,
"ipv6": true,
"fixed-cidr-v6": "2001:db8:1::/64",
"registry-mirrors": ["https://nexus3.onap.org:10001"]
}
EOF
sudo usermod -aG docker ubuntu
systemctl daemon-reload
systemctl restart docker
apt-mark hold docker-ce
IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
HOSTNAME=`hostname`
sudo echo "$IP_ADDR $HOSTNAME" >> /etc/hosts
docker login -u docker -p docker nexus3.onap.org:10001
sudo apt-get install make -y
# install nfs
sudo apt-get install nfs-common -y
sudo apt update
exit 0
|
This customization script will:
- Install docker and hold the docker version to 18.09.5
- insert hostname and IP address of the onap-nfs-server in the hosts file
- install nfs server
Resulting example
Configure NFS Share on Master node
Login into onap-nfs-server and perform the below commands
Create a master_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) node1_ip node2_ip ... nodeN_ip"
exit 1
}
if [ "$#" -lt 1 ]; then
echo "Missing NFS slave nodes"
usage
fi
#Install NFS kernel
sudo apt-get update
sudo apt-get install -y nfs-kernel-server
#Create /dockerdata-nfs and set permissions
sudo mkdir -p /dockerdata-nfs
sudo chmod 777 -R /dockerdata-nfs
sudo chown nobody:nogroup /dockerdata-nfs/
#Update the /etc/exports
NFS_EXP=""
for i in $@; do
NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) "
done
echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports
#Restart the NFS service
sudo exportfs -a
sudo systemctl restart nfs-kernel-server
|
Make the above created file as executable and run the script in the onap-nfs-server with the IP's of the worker nodes:
Code Block |
---|
chmod +x master_nfs_node.sh
sudo ./master_nfs_node.sh {list kubernetes worker nodes ip}
example from the WinLab setup:
sudo ./master_nfs_node.sh 10.31.4.21 10.31.4.22 10.31.4.23 10.31.4.24 10.31.4.25 10.31.4.26 10.31.4.27 10.31.4.28 10.31.4.29 10.31.4.30 |
Login into each kubernetes worker node, i.e. onap-k8s VMs and perform the below commands
Create a slaveCreate a master_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash usage () { echo "Usage:" echo " ./$(basename $0) node1nfs_ip node2master_ip ... nodeN_ip" exit 1 } if [ "$#" -ltne 1 ]; then echo "Missing NFS slavemater nodesnode" usage fi MASTER_IP=$1 #Install NFS kernelcommon sudo apt-get update sudo apt-get install -y nfs-kernel-servercommon #Create /dockerdata-nfs and set permissions sudo mkdir -p /dockerdata-nfs sudo chmod 777 -R /dockerdata-nfsNFS directory sudo chown nobody:nogroupmkdir -p /dockerdata-nfs/ #Update#Mount the remote /etc/exports NFS_EXP="" for i in $@; do NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) " done echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports #Restart the NFS service sudo exportfs -a sudo systemctl restart nfs-kernel-serverNFS directory to the local one sudo mount $MASTER_IP:/dockerdata-nfs /dockerdata-nfs/ echo "$MASTER_IP:/dockerdata-nfs /dockerdata-nfs nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0" | sudo tee -a /etc/fstab |
Make the above created file as executable and run the script in the onap-nfs-server with the IP's of the all the worker nodes:
Code Block |
---|
chmod +x masterslave_nfs_node.sh sudo ./masterslave_nfs_node.sh {listmaster kubernetesnfs workernode nodesIP ipaddress} example from the WinLab setup: sudo ./master_nfs_node.sh 10.31.3.39 10.31.3.24 10.31.3.52 10.31.3.8 10.31.3.34 10.31.3.47 10.31.3.15 10.31.3.9 10.31.3.5 10.31.3.21 10.31.3.1 10.31.3.68 |
Login into each kubernetes worker node, i.e. onap-k8s VMs and perform the below commands
Create a slave_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) nfs_master_ip"
exit 1
}
if [ "$#" -ne 1 ]; then
echo "Missing NFS mater node"
usage
fi
MASTER_IP=$1
#Install NFS common
sudo apt-get update
sudo apt-get install -y nfs-common
#Create NFS directory
sudo mkdir -p /dockerdata-nfs
#Mount the remote NFS directory to the local one
sudo mount $MASTER_IP:/dockerdata-nfs /dockerdata-nfs/
echo "$MASTER_IP:/dockerdata-nfs /dockerdata-nfs nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0" | sudo tee -a /etc/fstab
|
Make the above created file as executable and run the script in all the worker nodes:
Code Block |
---|
chmod +x slave_nfs_node.sh
sudo ./slave_nfs_node.sh {master nfs node IP address}
example from the WinLab setup:
sudo ./slave_nfs_node.sh 10.31.3.11 |
ONAP Installation
Perform the following steps in onap-control-1 VM.
Clone the OOM helm repository
Use the master branch as Dublin branch is not available.
Perform these on the home directory
Code Block |
---|
git clone -b <branch> "https://gerrit.onap.org/r/oom" --recurse-submodules
mkdir .helm
cp -R ~/oom/kubernetes/helm/plugins/ ~/.helm
cd oom/kubernetes/sdnc |
Edit the values.yaml file
Code Block |
---|
...
# Add sdnrwt as true at the end of the config
config:
...
sdnrwt: true
|
Add sdnrwt value under config in the file.
Save the file.
navigate to templates folder:
Code Block |
---|
cd templates/ |
Edit the statefulset.yaml file
Code Block |
---|
...
spec:
...
template:
...
spec:
...
containers:
- name: {{ include "common.name" . }}
...
...
# add sdnrwt flag set to true under env
env:
...
- name: SDNRWT
value: "{{ .Values.config.sdnrwt}}" |
Add SDNRWT environment parameter and its value reference.
Save the file.
Edit the service.yaml file
Code Block |
---|
...
spec:
type: {{ .Values.service.type }}
ports:
{{if eq .Values.service.type "NodePort" -}}
...
- port: {{ .Values.service.externalPort4 }}
targetPort: {{ .Values.service.internalPort4 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort4 }}
name: "{{ .Values.service.portName }}-8443"
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
name: {{ .Values.service.portName }}
{{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
type: NodePort
sessionAffinity: ClientIP
externalTrafficPolicy: Cluster
sessionAffinityConfig:
clientIP:
timeoutSeconds: 10800
status:
loadBalancer: {}
--- |
Append type NodePort, session affinity, session affinity config and load balancer parameters in service.
Copy override files
Code Block |
---|
cd
cp -r ~/oom/kubernetes/onap/resources/overrides .
cd overrides/ |
Edit the onap-all.yaml file
Code Block |
---|
# Copyright © 2019 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
###################################################################
# This override file enables helm charts for all ONAP applications.
###################################################################
cassandra:
enabled: true
mariadb-galera:
enabled: true
aaf:
enabled: true
aai:
enabled: true
appc:
enabled: true
cds:
enabled: true
clamp:
enabled: true
cli:
enabled: true
consul:
enabled: true
contrib:
enabled: true
dcaegen2:
enabled: true
dmaap:
enabled: true
esr:
enabled: true
log:
enabled: true
sniro-emulator:
enabled: true
oof:
enabled: true
msb:
enabled: true
multicloud:
enabled: true
nbi:
enabled: true
policy:
enabled: true
pomba:
enabled: true
portal:
enabled: true
robot:
enabled: true
sdc:
enabled: true
sdnc:
enabled: true
config:
sdnrwt: true
so:
enabled: true
uui:
enabled: true
vfc:
enabled: true
vid:
enabled: true
vnfsdk:
enabled: true
modeling:
enabled: true
|
Save the file.
Start helm server
go to home directory and start helm server and local repository.
Code Block |
---|
cd
helm serve & |
Hit on ENTER key to come out of helm serve if it shows some logs
Add helm repository
Note the port number that is listed and use it in the Helm repo add as follows
Code Block |
---|
helm repo add local http://127.0.0.1:8879 |
Verify helm repository
Code Block |
---|
helm repo list |
output:
from the WinLab setup:
sudo ./slave_nfs_node.sh 10.31.3.11 |
ONAP Installation
Perform the following steps in onap-control-01 VM.
Clone the OOM helm repository
Perform these on the home directory
- Clone oom repository with recursive submodules option
- Add deploy plugin to helm
- Add undeploy plugin to helm
- Add helm local repository to the local running server
Code Block |
---|
ubuntu@onap-control-01:~$ git clone -b master http://gerrit.onap.org/r/oom --recurse-submodules
ubuntu@onap-control-01:~$ helm plugin install ~/oom/kubernetes/helm/plugins/deploy
ubuntu@onap-control-01:~$ helm plugin install ~/oom/kubernetes/helm/plugins/undeploy
ubuntu@onap-control-01:~$ helm repo add local http://127.0.0.1:8080 |
Make charts from oom repository
Note |
---|
Do not use sudo to perform the 'make' operation |
This will take somewhere around 20-30 minutes of time to make all the helm charts and save the charts into local helm repository.
Code Block |
---|
ubuntu@onap-control-01:~$ cd ~/oom/kubernetes; make all -e SKIP_LINT=TRUE; make onap -e SKIP_LINT=TRUE
Using Helm binary helm which is helm version v3.5.2
[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'
[common]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting common
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, 0 chart(s) failed
Pushing common-8.0.0.tgz to local...
Done.
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[repositoryGenerator]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting repositoryGenerator
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, 0 chart(s) failed
Pushing repositoryGenerator-8.0.0.tgz to local...
Done.
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[readinessCheck]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 2 charts
Deleting outdated charts
==> Linting readinessCheck
[INFO] Chart.yaml: icon is recommended
..
..
..
..
[onap]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 39 charts
Downloading aaf from repo http://127.0.0.1:8080
Downloading aai from repo http://127.0.0.1:8080
Downloading appc from repo http://127.0.0.1:8080
Downloading cassandra from repo http://127.0.0.1:8080
Downloading cds from repo http://127.0.0.1:8080
Downloading cli from repo http://127.0.0.1:8080
Downloading common from repo http://127.0.0.1:8080
Downloading consul from repo http://127.0.0.1:8080
Downloading contrib from repo http://127.0.0.1:8080
Downloading cps from repo http://127.0.0.1:8080
Downloading dcaegen2 from repo http://127.0.0.1:8080
Downloading dcaegen2-services from repo http://127.0.0.1:8080
Downloading dcaemod from repo http://127.0.0.1:8080
Downloading holmes from repo http://127.0.0.1:8080
Downloading dmaap from repo http://127.0.0.1:8080
Downloading esr from repo http://127.0.0.1:8080
Downloading log from repo http://127.0.0.1:8080
Downloading sniro-emulator from repo http://127.0.0.1:8080
Downloading mariadb-galera from repo http://127.0.0.1:8080
Downloading msb from repo http://127.0.0.1:8080
Downloading multicloud from repo http://127.0.0.1:8080
Downloading nbi from repo http://127.0.0.1:8080
Downloading policy from repo http://127.0.0.1:8080
Downloading portal from repo http://127.0.0.1:8080
Downloading oof from repo http://127.0.0.1:8080
Downloading repository-wrapper from repo http://127.0.0.1:8080
Downloading robot from repo http://127.0.0.1:8080
Downloading sdc from repo http://127.0.0.1:8080
Downloading sdnc from repo http://127.0.0.1:8080
Downloading so from repo http://127.0.0.1:8080
Downloading uui from repo http://127.0.0.1:8080
Downloading vfc from repo http://127.0.0.1:8080
Downloading vid from repo http://127.0.0.1:8080
Downloading vnfsdk from repo http://127.0.0.1:8080
Downloading modeling from repo http://127.0.0.1:8080
Downloading platform from repo http://127.0.0.1:8080
Downloading a1policymanagement from repo http://127.0.0.1:8080
Downloading cert-wrapper from repo http://127.0.0.1:8080
Downloading roles-wrapper from repo http://127.0.0.1:8080
Deleting outdated charts
Skipping linting of onap
Pushing onap-8.0.0.tgz to local...
Done.
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
ubuntu@onap-control-01:~/oom/kubernetes$
|
Deploying ONAP
Deploying ONAP with helm command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
ubuntu@onap-control-01:~/oom/kubernetes$ helm deploy demo local/onap --namespace onap --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/onap-all.yaml -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/openstack.yaml --timeout 1200s
Output:
v3.5.2
/home/ubuntu/.local/share/helm/plugins/deploy/deploy.sh: line 92: [ -z: command not found
6
Use cache dir: /home/ubuntu/.local/share/helm/plugins/deploy/cache
0
0
/home/ubuntu/.local/share/helm/plugins/deploy/deploy.sh: line 126: expr--set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/onap-all.yaml -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/openstack.yaml --timeout 1200s: No such file or directory
0
fetching local/onap
history.go:56: [debug] getting history for release demo
install.go:173: [debug] Original chart version: ""
install.go:190: [debug] CHART PATH: /home/ubuntu/.local/share/helm/plugins/deploy/cache/onap
release "demo" deployed
release "demo-a1policymanagement" deployed
release "demo-aaf" deployed
release "demo-aai" deployed
release "demo-cassandra" deployed
release "demo-cds" deployed
release "demo-cert-wrapper" deployed
release "demo-cli" deployed
release "demo-consul" deployed
release "demo-contrib" deployed
release "demo-cps" deployed
release "demo-dcaegen2" deployed
release "demo-dcaegen2-services" deployed
release "demo-dcaemod" deployed
release "demo-dmaap" deployed
release "demo-esr" deployed
release "demo-holmes" deployed
release "demo-mariadb-galera" deployed
release "demo-modeling" deployed
release "demo-msb" deployed
release "demo-multicloud" deployed
release "demo-nbi" deployed
release "demo-oof" deployed
release "demo-platform" deployed
release "demo-policy" deployed
release "demo-portal" deployed
release "demo-repository-wrapper" deployed
release "demo-robot" deployed
release "demo-roles-wrapper" deployed
release "demo-sdc" deployed
release "demo-sdnc" deployed
release "demo-so" deployed
release "demo-uui" deployed
release "demo-vfc" deployed
release "demo-vid" deployed
release "demo-vnfsdk" deployed
6
ubuntu@onap-control-01:~/oom/kubernetes$ |
Verify the deploy:
Code Block |
---|
ubuntu@onap-control-01:~$ helm ls -n onap
NAME NAMESPACE REVISION UPDATED |
Code Block |
ubuntu@onap-control-1:~$ helm repo list NAME URL STATUS local http://127.0.0.1:8879/chartsCHART APP ubuntu@onap-control-1:~$ |
Make onap helm charts available in local helm repository
Code Block |
---|
cd ~/oom/kubernetes
make all; make onap |
Note |
---|
Do not use sudo to perform the above 'make' operation |
This take somewhere around 10-15 minutes of time to make all the helm charts and save the charts into local helm repository
output:
Code Block |
---|
ubuntu@onap-control-1:~$ cd ~/oom/kubernetes/
ubuntu@onap-control-1:~/oom/kubernetes$ make all; make onap
[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'
[common]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting common
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/common-4.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
...
...
...
[onap]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 33 charts
Downloading aaf from repo http://127.0.0.1:8879
Downloading aai from repo http://127.0.0.1:8879
Downloading appc from repo http://127.0.0.1:8879
Downloading cassandra from repo http://127.0.0.1:8879
Downloading clamp from repo http://127.0.0.1:8879
Downloading cli from repo http://127.0.0.1:8879
Downloading common from repo http://127.0.0.1:8879
Downloading consul from repo http://127.0.0.1:8879
Downloading contrib from repo http://127.0.0.1:8879
Downloading dcaegen2 from repo http://127.0.0.1:8879
Downloading dmaap from repo http://127.0.0.1:8879
Downloading esr from repo http://127.0.0.1:8879
Downloading log from repo http://127.0.0.1:8879
Downloading sniro-emulator from repo http://127.0.0.1:8879
Downloading mariadb-galera from repo http://127.0.0.1:8879
Downloading msb from repo http://127.0.0.1:8879
Downloading multicloud from repo http://127.0.0.1:8879
Downloading nbi from repo http://127.0.0.1:8879
Downloading nfs-provisioner from repo http://127.0.0.1:8879
Downloading pnda from repo http://127.0.0.1:8879
Downloading policy from repo http://127.0.0.1:8879
Downloading pomba from repo http://127.0.0.1:8879
Downloading portal from repo http://127.0.0.1:8879
Downloading oof from repo http://127.0.0.1:8879
Downloading robot from repo http://127.0.0.1:8879
Downloading sdc from repo http://127.0.0.1:8879
Downloading sdnc from repo http://127.0.0.1:8879
Downloading so from repo http://127.0.0.1:8879
Downloading uui from repo http://127.0.0.1:8879
Downloading vfc from repo http://127.0.0.1:8879
Downloading vid from repo http://127.0.0.1:8879
Downloading vnfsdk from repo http://127.0.0.1:8879
Downloading modeling from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting onap
Lint OK
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/onap-4.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
ubuntu@onap-control-1:~/oom/kubernetes$
|
Deploy ONAP
The name of the release as 'demo', the namespace as 'onap' and the timeout of 300 seconds to deploy 'dmaap' and 'so' which takes some time to deploy these charts waiting for other components.
Perform these below commands in onap-control-1 where git was cloned.
Code Block |
---|
helm deploy demo local/onap --namespace onap -f ~/overrides/onap-all.yaml -f ~/overrides/environment.yaml --timeout 900 |
Takes some 60-70 minutes due to added timeout parameter and environment file.
The environment file provides module wise delay required to process the deployment.
The output:
Code Block |
---|
ubuntu@onap-control-1:~/oom/kubernetes$ helm deploy demo local/onap --namespace onap -f ~/overrides/onap-all.yaml --timeout 900
fetching local/onap
release "demo" deployed
release "demo-aaf" deployed
release "demo-aai" deployed
release "demo-appc" deployed
release "demo-cassandra" deployed
release "demo-cds" deployed
release "demo-clamp" deployed
release "demo-cli" deployed
release "demo-consul" deployed
release "demo-contrib" deployed
release "demo-dcaegen2" deployed
release "demo-dmaap" deployed
release "demo-esr" deployed
release "demo-log" deployed
release "demo-mariadb-galera" deployed
release "demo-modeling" deployed
release "demo-msb" deployed
release "demo-multicloud" deployed
release "demo-nbi" deployed
release "demo-oof" deployed
release "demo-policy" deployed
release "demo-pomba" deployed
release "demo-portal" deployed
release "demo-robot" deployed
release "demo-sdc" deployed
release "demo-sdnc" deployed
release "demo-sniro-emulator" deployed
release "demo-so" deployed
release "demo-uui" deployed
release "demo-vfc" deployed
release "demo-vid" deployed
release "demo-vnfsdk" deployed
ubuntu@onap-control-1:~/oom/kubernetes$ |
Verify the deploy
Code Block |
---|
ubuntu@onap-control-1:~/overrides$ helm ls NAME REVISION UPDATED VERSION demo onap 1 2021-07-13 15:14:35.025694014 +0000 UTC deployed onap-8.0.0 Honolulu demo-a1policymanagement onap 1 2021-07-13 15:14:38.155669343 +0000 UTC deployed a1policymanagement-8.0.0 1.0.0 demo-aaf onap 1 2021-07-13 15:14:44.083961609 +0000 UTC deployed aaf-8.0.0 demo-aai onap 1 2021-07-13 15:15:43.238758595 +0000 UTC deployed aai-8.0.0 demo-cassandra onap 1 2021-07-13 15:16:32.632257395 +0000 UTC deployed cassandra-8.0.0 demo-cds onap 1 2021-07-13 15:16:42.884519209 +0000 UTC deployed cds-8.0.0 demo-cert-wrapper onap 1 2021-07-13 15:17:08.172161 +0000 UTC deployed cert-wrapper-8.0.0 demo-cli onap 1 2021-07-13 15:17:17.703468641 +0000 UTC deployed cli-8.0.0 demo-consul onap 1 2021-07-13 15:17:23.487068838 +0000 UTC deployed consul-8.0.0 demo-contrib onap STATUS1 CHART 2021-07-13 APP VERSION NAMESPACE demo 15:17:37.10843864 +0000 UTC deployed contrib-8.0.0 demo-cps 1 Fri Nov 29 16:26:16 2019 DEPLOYED onap-5.0.0 El Alto 1 onap demo-aaf 2021-07-13 1 15:18:04.024754433 +0000 UTC deployed Fri Nov 29 16:26:17 2019 DEPLOYED aaf-5 cps-8.0.0 demo-dcaegen2 onap onap1 demo-aai 1 2021-07-13 15:18:21.92984273 +0000 UTC deployed Fri Nov 29 16:26:28 2019 DEPLOYED aai-5 dcaegen2-8.0.0 demo-dcaegen2-services onap 1 onap demo-appc 2021-07-13 15:19:27.147459081 +0000 UTC 1deployed Fri Nov 29 16:27:30 2019 DEPLOYED appc-5 dcaegen2-services-8.0.0 Honolulu demo-dcaemod onap demo-cassandra 1 Fri Nov 29 16:27:41 2019 DEPLOYED cassandra-5.0.0 2021-07-13 15:19:51.020335352 +0000 UTC deployed onap dcaemod-8.0.0 demo-dmaap demo-cds onap 1 Fri Nov 29 16:27:56 2019 DEPLOYED cds-5.0.0 1 2021-07-13 15:20:23.115045736 +0000 UTC deployed onap dmaap-8.0.0 demo-clampesr 1 onap Fri Nov 29 16:28:58 2019 DEPLOYED clamp-5.0.0 1 onap2021-07-13 15:21:48.99450393 +0000 UTC deployed esr-8.0.0 demo-cliholmes onap 1 Fri Nov 29 16:29:31 2019 DEPLOYED cli-5.0.0 1 2021-07-13 15:21:55.637545972 +0000 UTC deployed onap holmes-8.0.0 demo-consulmariadb-galera onap 1 Fri Nov1 29 16:29:45 2019 DEPLOYED consul-5.0.0 2021-07-13 15:22:26.899830789 +0000 UTC deployed onap mariadb-galera-8.0.0 demo-contribmodeling 1 onap Fri Nov 29 16:30:04 2019 DEPLOYED contrib-5.0.0 1 onap demo-dcaegen2 12021-07-13 15:22:36.77062758 +0000 UTC deployed Fri Nov 29 16:31:03 2019 DEPLOYED dcaegen2-5modeling-8.0.0 demo-msb onap onap demo-dmaap 1 1 Fri Nov 29 16:35:47 2019 DEPLOYED dmaap-52021-07-13 15:22:43.955119743 +0000 UTC deployed msb-8.0.0 demo-multicloud onap onap 1 demo-esr 1 2021-07-13 15:22:57.122972321 +0000 UTC deployed Fri Nov 29 16:50:24 2019 DEPLOYED esr-5 multicloud-8.0.0 demo-nbi onap onap1 demo-log 1 2021-07-13 15:23:10.724184832 +0000 UTC deployed Fri Nov 29 16:50:38 2019 DEPLOYED log-5 nbi-8.0.0 demo-oof onap onap demo-mariadb-galera 1 Fri Nov 29 16:51:08 2019 DEPLOYED mariadb-galera-5.0.0 2021-07-13 15:23:21.867288517 +0000 UTC deployed onap oof-8.0.0 demo-modelingpolicy 1 onap Fri Nov 29 16:51:29 2019 DEPLOYED modeling-5.0.0 1 onap demo-msb 1 2021-07-13 15:26:33.741229968 +0000 UTC deployed Fri Nov 29 16:51:45 2019 DEPLOYED msb-5 policy-8.0.0 demo-portal onap onap 1 demo-multicloud 1 Fri Nov 29 16:52:23 2019 DEPLOYED multicloud-52021-07-13 15:29:42.334773742 +0000 UTC deployed portal-8.0.0 demo-repository-wrapper onap 1 onap demo-nbi 2021-07-13 15:30:24.228522944 +0000 1UTC deployed Fri Nov 29 16:53:26 2019 DEPLOYED nbi-5.0.0 repository-wrapper-8.0.0 demo-robot onap onap1 demo-oof 1 2021-07-13 15:30:36.103266739 +0000 UTC deployed Fri Nov 29 16:54:03 2019 DEPLOYED oof-5 robot-8.0.0 demo-roles-wrapper onap 1 onap demo-policy 2021-07-13 1 15:30:43.592035776 +0000 UTC deployed Fri Nov 29 16:56:27 2019 DEPLOYED policy-5 roles-wrapper-8.0.0 demo-sdc onap 1 onap demo-pomba 1 2021-07-13 15:30:50.662463052 +0000 UTC deployed Fri Nov 29 16:59:13 2019 DEPLOYED pomba-5 sdc-8.0.0 demo-so onap onap demo-portal 1 1 Fri Nov 29 17:01:44 2019 DEPLOYED portal-52021-07-13 15:34:44.911711191 +0000 UTC deployed so-8.0.0 demo-uui onap onap demo-robot 1 1 Fri Nov 29 17:03:10 2019 DEPLOYED robot-5.0.0 2021-07-13 15:55:27.84129364 +0000 UTC deployed uui-8.0.0 demo-vfc onap demo-sdc onap 1 1 Fri Nov 29 17:03:24 2019 DEPLOYED sdc-5.0.0 2021-07-13 15:55:32.516727818 +0000 UTC deployed vfc-8.0.0 demo-vid onap demo-sdnc onap 1 Fri Nov 29 17:05:27 2019 DEPLOYED sdnc-5.0.01 2021-07-13 15:56:02.048766897 +0000 UTC deployed onap vid-8.0.0 demo-sniro-emulator 1vnfsdk Frionap Nov 29 17:08:24 2019 DEPLOYED sniro-emulator-5.0.0 1 onap demo-so 2021-07-13 15:56:19.960367033 +0000 UTC deployed 1 Fri Nov 29 17:10:33 2019 DEPLOYED so-5.0.0 vnfsdk-8.0.0 ubuntu@onap-control-01:~/oom/kubernetes$ |
In case of missing or failures in deployment.
If the deployment of any onap module fails, please go through these steps to redeploy the modules.
In this example, we demonstrate failure of dmaap, which normally occurs due to timeout issues.
Missing deployment
In the above deployment, demo-sdnc is missing. So we reinstall this.
Code Block |
---|
ubuntu@onap-control-01:~/oom/kubernetes$ helm install --namespace onap demo-sdnc local/sdnc --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/onap-all.yaml --timeout 1200s
NAME: demo-sdnc
LAST DEPLOYED: Tue Jul 13 16:11:58 2021
NAMESPACE: onap
STATUS: deployed
REVISION: 1
TEST SUITE: None
ubuntu@onap-control-01:~/oom/kubernetes$ |
Check the failed modules
perform 'helm ls' on the control node.
Code Block |
---|
ubuntu@onap-control-01:~$ helm ls -n onap NAME onap demo-uui 1 Fri Nov 29 17:24:55 2019 DEPLOYED uui-5.0.0 NAMESPACE REVISION UPDATED onap demo-vfc STATUS 1CHART Fri Nov 29 17:24:59 2019 DEPLOYED vfc-5.0.0 APP VERSION demo onap demo-vid onap 1 Fri Nov 29 17:26:05 2019 DEPLOYED vid-52021-07-13 15:14:35.025694014 +0000 UTC deployed onap-8.0.0 onap Honolulu demo-vnfsdk a1policymanagement onap 1 Fri Nov 29 17:26:38 2019 DEPLOYED vnfsdk-52021-07-13 15:14:38.155669343 +0000 UTC deployed a1policymanagement-8.0.0 1.0.0 demo-aaf onap ubuntu@onap-control-1:~/oom/kubernetes$ |
In case of failures in deployment
If the deployment of any onap module fails, please go through these steps to redeploy the modules.
In this example, we demonstrate failure of dmaap, which normally occurs due to timeout issues.
Check the failed modules
perform 'helm ls' on the control node.
Code Block |
---|
ubuntu@onap-control-1:~/overrides$ helm ls NAME onap 1 2021-07-13 15:14:44.083961609 +0000 UTC REVISION UPDATED deployed aaf-8.0.0 STATUS CHART demo-aai APP VERSION NAMESPACE demo onap 1 Fri Nov 29 16:26:16 2019 DEPLOYED onap-52021-07-13 15:15:43.238758595 +0000 UTC deployed aai-8.0.0 El Alto onap demo-aafcassandra onap 1 Fri Nov 29 16:26:17 2019 DEPLOYED aaf-52021-07-13 15:16:32.632257395 +0000 UTC deployed cassandra-8.0.0 demo-cds onap demo-aai onap 1 Fri Nov 29 16:26:28 2019 DEPLOYED aai-52021-07-13 15:16:42.884519209 +0000 UTC deployed cds-8.0.0 onap demo-cert-appcwrapper onap 1 Fri Nov 29 16:27:30 2019 DEPLOYED appc-52021-07-13 15:17:08.172161 +0000 UTC deployed cert-wrapper-8.0.0 demo-cli onap demo-cassandra onap 1 Fri Nov 29 16:27:41 2019 DEPLOYED cassandra-52021-07-13 15:17:17.703468641 +0000 UTC deployed cli-8.0.0 onap demo-cdsconsul onap 1 Fri Nov 29 16:27:56 2019 DEPLOYED cds-52021-07-13 15:17:23.487068838 +0000 UTC deployed consul-8.0.0 onap demo-contrib demo-clamp onap 1 Fri Nov 29 16:28:58 2019 DEPLOYED clamp-52021-07-13 15:17:37.10843864 +0000 UTC deployed contrib-8.0.0 onap demo-cps demo-cli onap 1 Fri Nov 29 16:29:31 2019 DEPLOYED cli-52021-07-13 15:18:04.024754433 +0000 UTC deployed cps-8.0.0 onap demo-consuldcaegen2 onap 1 Fri Nov 29 16:29:45 2019 DEPLOYED consul-52021-07-13 15:18:21.92984273 +0000 UTC deployed dcaegen2-8.0.0 onap demo-contribdcaegen2-services onap 1 Fri Nov 29 16:30:04 2019 DEPLOYED contrib-52021-07-13 15:19:27.147459081 +0000 UTC deployed dcaegen2-services-8.0.0 Honolulu demo-dcaemod onap demo-dcaegen2 1 Fri Nov 29 16:31:03 2019 DEPLOYED dcaegen2-52021-07-13 15:19:51.020335352 +0000 UTC deployed dcaemod-8.0.0 onap demo-dmaapdmaap onap 1 Mon Dec 2 05:45:05 2019 FAILED dmaap-52021-07-13 15:20:23.115045736 +0000 UTC deployed dmaap-8.0.0 onap demo-esr onap 1 Fri Nov 29 16:50:24 2019 DEPLOYED esr-52021-07-13 15:21:48.99450393 +0000 UTC deployed esr-8.0.0 onap demo-logholmes onap 1 Fri Nov 29 16:50:38 2019 DEPLOYED log-52021-07-13 15:21:55.637545972 +0000 UTC deployed holmes-8.0.0 demo-mariadb-galera onap demo-mariadb-galera 1 Fri Nov 29 16:51:08 2019 DEPLOYED2021-07-13 15:22:26.899830789 +0000 UTC deployed mariadb-galera-58.0.0 onap demo-modeling onap 1 Fri Nov 29 16:51:29 2019 DEPLOYED modeling-52021-07-13 15:22:36.77062758 +0000 UTC deployed modeling-8.0.0 onap demo-msb onap 1 Fri Nov 29 16:51:45 2019 DEPLOYED msb-52021-07-13 15:22:43.955119743 +0000 UTC deployed msb-8.0.0 onap demo-multicloud onap 1 Fri Nov 29 16:52:23 2019 DEPLOYED multicloud-52021-07-13 15:22:57.122972321 +0000 UTC deployed multicloud-8.0.0 onap demo-nbi onap 1 Fri Nov 29 16:53:26 2019 DEPLOYED nbi-52021-07-13 15:23:10.724184832 +0000 UTC deployed nbi-8.0.0 onap demo-oof 1onap 1 Mon Dec 2 2021-07-13 15:04:11 2019 DEPLOYED23:21.867288517 +0000 UTC deployed oof-58.0.0 onap demo-policy onap 1 Fri Nov 29 16:56:27 2019 DEPLOYED policy-52021-07-13 15:26:33.741229968 +0000 UTC deployed policy-8.0.0 onap demo-pombaportal onap 1 Fri Nov 29 16:59:13 2019 DEPLOYED pomba-52021-07-13 15:29:42.334773742 +0000 UTC deployed portal-8.0.0 onap demo-portal repository-wrapper onap 1 Fri Nov 29 17:01:44 2019 DEPLOYED portal-52021-07-13 15:30:24.228522944 +0000 UTC deployed repository-wrapper-8.0.0 demo-robot onap demo-robot onap 1 Fri Nov 29 17:03:10 2019 DEPLOYED robot-52021-07-13 15:30:36.103266739 +0000 UTC deployed robot-8.0.0 onap demo-roles-sdcwrapper onap 1 Fri Nov 29 17:03:24 2019 DEPLOYED sdc-52021-07-13 15:30:43.592035776 +0000 UTC deployed roles-wrapper-8.0.0 demo-sdc onap demo-sdnc onap 1 Fri Nov 29 17:05:27 2019 DEPLOYED sdnc-52021-07-13 15:30:50.662463052 +0000 UTC deployed sdc-8.0.0 demo-sdnc onap demo-sniro-emulator 1 Fri Nov 29 17:08:24 2019 DEPLOYED sniro-emulator-52021-07-13 16:11:58.795467333 +0000 UTC deployed sdnc-8.0.0 onap demo-so 1 onap 1 Mon Dec 2 08:58:33 2019 DEPLOYED 2021-07-13 15:34:44.911711191 +0000 UTC deployed so-58.0.0 onap demo-uui onap 1 Fri Nov 29 17:24:55 2019 DEPLOYED uui-52021-07-13 15:55:27.84129364 +0000 UTC deployed uui-8.0.0 onap demo-vfc onap 1 Fri Nov 29 17:24:59 2019 DEPLOYED vfc-52021-07-13 15:55:32.516727818 +0000 UTC deployed vfc-8.0.0 onap demo-vid onap 1 Fri Nov 29 17:26:05 2019 DEPLOYED vid-52021-07-13 15:56:02.048766897 +0000 UTC deployed vid-8.0.0 onap demo-vnfsdk onap 1 Fri Nov 29 17:26:38 2019 DEPLOYED vnfsdk-52021-07-13 15:56:19.960367033 +0000 UTC deployed vnfsdk-8.0.0 onap |
Delete the failed module
use the right release name from the name as shown in helm ls.
...
Code Block |
---|
helm delete demo-dmaap --purge
kubectl get persistentvolumeclaims -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash
kubectl get persistentvolumes -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash
kubectl get secrets -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete secrets -n onap \1/' | bash
kubectl get clusterrolebindings -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings -n onap \1/' | bash
kubectl get jobs -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete jobs -n onap \1/' | bash
kubectl get pods -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete pods -n onap \1/' | bash
|
...
Code Block |
---|
cd /dockerdata-nfs/ sudo rm -r demo-dmaap/ |
Reinstall module
Reinstall the deleted module with the same release name as used in the deletion
Code Block |
---|
helm install install --namespace onap -n demo-dmaap local/dmaap --namespace onap -n demo-dmaap local/dmaapset global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/onap-all.yaml --timeout 9001200s |
You can verify the deployment in a parallel terminal by checking the pods using the command
...
Once this is deployed, you can verify using the "helm ls" command to check all the required modules are up and running.
Undeploy ONAP
For the release name 'demo' and namespace 'onap':
...
Code Block |
---|
helm undeploy demo --purge kubectl get persistentvolumeclaims -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash kubectl get persistentvolumes -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash kubectl get secrets -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete secrets -n onap \1/' | bash kubectl get clusterrolebindings -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings clusterrolebindings -n onap \1/' | bash kubectl get jobs -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete jobs -n onap \1/' | bash kubectl get jobspods -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete jobspods -n onap \1/' | bash kubectl get pods -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete pods -n onap \1/' | bash |
Perform the below commands in onap-nfs-server.
This is to delete all the network shared data which will not be deleted on purge delete of helm release.
Code Block |
---|
cd /dockerdata-nfs/
sudo rm -r *
e.g.
ubuntu@onap-nfs-server:~$ cd /dockerdata-nfs/
ubuntu@onap-nfs-server:/dockerdata-nfs$ sudo rm -r * |
Access SDN-R
ODLUX-GUI at winlab
The {user} should be replaced by your user id created in orbit-lab.
|
Perform the below commands in onap-nfs-server.
This is to delete all the network shared data which will not be deleted on purge delete of helm release.
Code Block |
---|
cd /dockerdata-nfs/
sudo rm -r *
e.g.
ubuntu@onap-nfs-server:~$ cd /dockerdata-nfs/
ubuntu@onap-nfs-server:/dockerdata-nfs$ sudo rm -r * |
Access SDN-R
ODLUX-GUI at winlab
The {username} should be replaced by your user id created in orbit-lab.
Code Block |
---|
SSH from your machine to create tunnels with given ports on console.sb10.orbit.org:
hanif@ubuntu:~$ ssh -L 30267:localhost:30267 -L 30205:localhost:30205 {usename}@console.sb10.orbit-lab.org
SSH from console.sb10.orbit.org to create tunnels with given ports on node1-4.sb10.orbit.org:
hanif@console:~$ ssh -L 30267:localhost:30267 -L 30205:localhost:30205 native@node1-4
SSH from node1-4.sb10.orbit.org to create tunnels with given ports on onap-control-01:
native@node1-4:~$ ssh -L 30267:localhost:30267 -L 30205:localhost:30205 ubuntu@10.31.4.11
|
Code Block |
ssh -A -t {user}@console.sb10.orbit-lab.org -L 31939:localhost:31939 ssh -A -t native@node1-1.sb10.orbit-lab.org -L 31939:localhost:31939 ssh -A -t ubuntu@10.31.3.2 -L 31939:localhost:31939
|
On your browser:
Code Block |
---|
http://localhost:3193930267/odlux/index.html |
The login credentials are:
...
password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
ODLUX-GUI at your labs
Check the IP on the sdnc service bound to port 8282:
Code Block |
---|
ubuntu@onap-control-101:~$ kubectl get service -n onap | grep sdnc pomba-sdncctxbuildersdnc NodePort ClusterIP 10.43.145101.187189 <none> 95308443:30267/TCP 2d21h sdnc-ansible-server 2d18h sdnc ClusterIP 10.43.46.219 <none> 8000/TCP NodePort 10.43.103.106 <none> 2d21h sdnc-callhome 8282:31939/TCP,8202:31510/TCP,8280:30246/TCP,8443:30267/TCP 7m52s sdnc-ansible-server NodePort ClusterIP 10.43.113139.22627 <none> 80006666:30266/TCP 7m52s2d21h sdnc-cluster ClusterIP None <none> 2550/TCP 7m52s2d21h sdnc-dgbuilder NodePort 10.43.6224.5071 <none> 3000:30203/TCP 7m52s2d21h sdnc-dmaap-listener ClusterIP None <none> <none> 7m52s2d21h sdnc-portaloam NodePort ClusterIP 10.43.116227.73206 <none> 8443:302018282/TCP,8202/TCP 7m52s2d21h sdnc-ueb-listener ClusterIP None <none> <none> 7m52s so-sdnc-adapter2d21h sdnc-web-service NodePort ClusterIP 10.43.27211.874 <none> 80868443:30205/TCP 2d21h so-sdnc-adapter 142m vfc-zte-sdnc-driver ClusterIP 10.43.18920.17058 <none> 84118086/TCP 2d17h |
Look for sdnc service only and the port bound to 8282.
In the above result it is 31939.
Code Block |
---|
http://{ip-address}:{sdnc-port-bound-to-8282}/odlux/index.html |
The {ip-address} is the IP address of the onap-control-1 machine.
2d21h |
Troubleshooting
Documentation for troubleshooting.
ES-DB index read only – NFS out of disc space
ONAP log (elastic DB) consumes approx 1 GB per day. If disc space crosses a threshold, indindices of SDNC elastic DB are set to read-only.
...
Code Block | ||
---|---|---|
| ||
PUT _settings { "index": { "blocks": { "read_only_allow_delete": "false" } } } |
helm repo add local http://127.0.0.1:8080