Table of Contents |
---|
Overview
For ONAP SDN-R load and stress test and Proof of concept, June 19 a three node SDN-R cluster is used. Version is El Alto.
Precondition
- Running performant physical server cluster (The hardware requirements)
- Openstack OpenStack installed
- VM Virtual Machine cloud image ubuntu Ubuntu 18.04-server-image
Goal of this description is to setup a partial complete ONAP with focus of SDN-R SDNC services
Steps
- Installing Docker, Kubernetes and Rancher
- Initiation of HELM
- Downloading OOM charts
- Installation of all OOM based ONAP componnents
- Installation SDN-R, LOG, AAI, SO, PORTAL, ROBOT FrameworkInstallartion of Device Simulators
draw.io Diagram | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OpenStack Preparation
Required Security Groups Rules
Installing Kubernetes and Rancher
...
Create
...
the Rancher 3
...
nodes control cluster named as onap-control on OpenStack
...
The following instructions describe how to create 3 OpenStack VMs to host the Highly-Available Kubernetes Control Plane. ONAP workloads will not be scheduled on these Control Plane nodes.
Launch new VMs in OpenStack.
Select Ubuntu
...
20.04 as the boot image for the
...
virtual machine without any volume
Select
...
m4.large flavor
...
Networking
Apply customization script for Control Plane VMs
The script to be copied:
Code Block |
---|
#!/bin/bash DOCKER_VERSION=1819.0903.515 sudo apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh mkdir -p /etc/systemd/system/docker.service.d/ cat > /etc/systemd/system/docker.service.d/dockerdaemon.confjson << EOF { "insecure-registries" : [Service] ExecStart= ExecStart=/usr/bin/dockerd -H fd:// --insecure-registry=nexus3.onap.org:10001 EOF sudo usermod -aG docker ubuntu systemctl daemon-reload systemctl restart docker "nexus3.onap.org:10001" ], "log-driver": "json-file", "log-opts": { "max-size": "1m", "max-file": "9" }, "mtu": 1450, "ipv6": true, "fixed-cidr-v6": "2001:db8:1::/64", "registry-mirrors": ["https://nexus3.onap.org:10001"] } EOF sudo usermod -aG docker ubuntu sudo systemctl daemon-reload sudo systemctl restart docker sudo apt-mark hold docker-ce IP_ADDR=ip`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}' ` HOSTNAME=hostname`hostname` echo "$IP_ADDR $HOSTNAME" >> /etc/hosts docker login -u docker -p docker nexus3.onap.org:10001 sudo apt-get install make -y wget https://storage.googleapis.com/kubernetes-release/release/v1.13.5/bin/linux/amd64/kubectl chmod +x kubectl sudo mv ./kubectl /usr/local/bin/kubectl wget http://storage.googleapis.com/kubernetes-helm/helm-v2.12.3-linux-amd64.tar.gz tar -zxvf helm-v2.12.3-linux-amd64.tar.gz sudo mv linux-amd64/helm /usr/local/bin/helm exit 0#nfs server sudo apt-get install nfs-kernel-server -y sudo mkdir -p /dockerdata-nfs sudo chown nobody:nogroup /dockerdata-nfs/ exit 0 |
This customization script will:
- Update Ubuntu
- Install docker and hold the docker version to 19.03.15
- set hosts file with IP and hostname
- install nfs-kernel-server
Launched Instances
Create the Kubernetes 12 nodes worker cluster named as onap-workers on OpenStack cloud
The following instructions describe how to create OpenStack VMs to host the Highly-Available Kubernetes Workers. ONAP workloads will only be scheduled on these nodes.
Launch new VM instances in OpenStack
Select Ubuntu 20.04 as base image
Select Flavor
The size of Kubernetes hosts depend on the size of the ONAP deployment being installed.
If a small subset of ONAP applications are being deployed (i.e. for testing purposes), then 16GB or 32GB may be sufficient.
Networking
Apply customization script for Kubernetes VM(s)
The scrip to be copied:
Code Block |
---|
#!/bin/bash
DOCKER_VERSION=19.03.15
sudo apt-get update
curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
cat > /etc/docker/daemon.json << EOF
{
"insecure-registries" : [ "nexus3.onap.org:10001" ],
"log-driver": "json-file",
"log-opts": {
"max-size": "1m",
"max-file": "9"
},
"mtu": 1450,
"ipv6": true,
"fixed-cidr-v6": "2001:db8:1::/64",
"registry-mirrors": ["https://nexus3.onap.org:10001"]
}
EOF
sudo usermod -aG docker ubuntu
sudo systemctl daemon-reload
sudo systemctl restart docker
sudo apt-mark hold docker-ce
IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
HOSTNAME=`hostname`
echo "$IP_ADDR $HOSTNAME" >> /etc/hosts
docker login -u docker -p docker nexus3.onap.org:10001
sudo apt-get install make -y
# install nfs
sudo apt-get install nfs-common -y
exit 0 |
This customization script will:
- Update Ubuntu
- Install docker and hold the docker version to 19.03.15
- insert hostname and IP in the hosts file
- install nfs common
Launched onap-workers instances
Configure Rancher Kubernetes Engine
Install RKE
Download and install RKE on the onap-control-01 VM. Binaries can be found here for Linux and Mac: https://github.com/rancher/rke/releases/download/v1.2.7/
Perform this on the onap-control-01 VM which has key to access the created VMs.
In our setup, the key of OpenStack controller has also been placed in onap-control-01 and used to login into VMs, so these steps have been performed on onap-control-01 VM.
Code Block |
---|
mkdir rke
cd rke/
wget https://github.com/rancher/rke/releases/download/v1.2.7/rke_linux-amd64
mv rke_linux-amd64 rke
chmod 754 rke |
RKE requires a cluster.yml as input. An example file is show below that describes a Kubernetes cluster that will be mapped onto the OpenStack VMs created earlier in this guide.
Example: cluster.yml
The example file:
Code Block |
---|
# An example of an HA Kubernetes cluster for ONAP
nodes:
- address: 10.31.4.11
port: "22"
role:
- controlplane
- etcd
hostname_override: "onap-control-01"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.12
port: "22"
role:
- controlplane
- etcd
hostname_override: "onap-control-02"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.13
port: "22"
role:
- controlplane
- etcd
hostname_override: "onap-control-03"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.21
port: "22"
role:
- worker
hostname_override: "onap-workers-01"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.22
port: "22"
role:
- worker
hostname_override: "onap-workers-02"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.23
port: "22"
role:
- worker
hostname_override: "onap-workers-03"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.24
port: "22"
role:
- worker
hostname_override: "onap-workers-04"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.25
port: "22"
role:
- worker
hostname_override: "onap-workers-05"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.26
port: "22"
role:
- worker
hostname_override: "onap-workers-06"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.27
port: "22"
role:
- worker
hostname_override: "onap-workers-07"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.28
port: "22"
role:
- worker
hostname_override: "onap-workers-08"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.29
port: "22"
role:
- worker
hostname_override: "onap-workers-09"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
- address: 10.31.4.30
port: "22"
role:
- worker
hostname_override: "onap-workers-10"
user: ubuntu
ssh_key_path: "~/.ssh/id_ecdsa"
services:
kube-api:
service_cluster_ip_range: 10.43.0.0/16
pod_security_policy: false
always_pull_images: false
kube-controller:
cluster_cidr: 10.42.0.0/16
service_cluster_ip_range: 10.43.0.0/16
kubelet:
cluster_domain: cluster.local
cluster_dns_server: 10.43.0.10
fail_swap_on: false
network:
plugin: canal
authentication:
strategy: x509
ssh_key_path: "~/.ssh/id_ecdsa"
ssh_agent_auth: false
authorization:
mode: rbac
ignore_docker_version: false
kubernetes_version: "v1.19.9-rancher1-1"
private_registries:
- url: nexus3.onap.org:10001
user: docker
password: docker
is_default: true
cluster_name: "onap"
restore:
restore: false
snapshot_name: "" |
Prepare cluster.yml
Before this configuration file can be used the IP address must be mapped for each control and worker node in this file.
Run RKE
From within the same directory as the cluster.yml file, simply execute:
ubuntu@onap-control-01:~/rke$ ./rke up
Code Block |
---|
./rke up |
The output will look something like:
Code Block |
---|
ubuntu@onap-control-01:~/rke$ ./rke up
INFO[0000] Running RKE version: v1.2.7
INFO[0000] Initiating Kubernetes cluster
INFO[0000] [dialer] Setup tunnel for host [10.31.4.26]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.29]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.24]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.27]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.25]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.11]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.22]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.30]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.21]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.13]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.28]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.12]
INFO[0000] [dialer] Setup tunnel for host [10.31.4.23]
. . . .
. . . .
. . . .
INFO[0236] [sync] Successfully synced nodes Labels and Taints
INFO[0236] [network] Setting up network plugin: canal
INFO[0236] [addons] Saving ConfigMap for addon rke-network-plugin to Kubernetes
INFO[0236] [addons] Successfully saved ConfigMap for addon rke-network-plugin to Kubernetes
INFO[0236] [addons] Executing deploy job rke-network-plugin
INFO[0241] [addons] Setting up coredns
INFO[0241] [addons] Saving ConfigMap for addon rke-coredns-addon to Kubernetes
INFO[0241] [addons] Successfully saved ConfigMap for addon rke-coredns-addon to Kubernetes
INFO[0241] [addons] Executing deploy job rke-coredns-addon
INFO[0251] [addons] CoreDNS deployed successfully
INFO[0251] [dns] DNS provider coredns deployed successfully
INFO[0251] [addons] Setting up Metrics Server
INFO[0251] [addons] Saving ConfigMap for addon rke-metrics-addon to Kubernetes
INFO[0251] [addons] Successfully saved ConfigMap for addon rke-metrics-addon to Kubernetes
INFO[0251] [addons] Executing deploy job rke-metrics-addon
INFO[0256] [addons] Metrics Server deployed successfully
INFO[0256] [ingress] Setting up nginx ingress controller
INFO[0256] [addons] Saving ConfigMap for addon rke-ingress-controller to Kubernetes
INFO[0257] [addons] Successfully saved ConfigMap for addon rke-ingress-controller to Kubernetes
INFO[0257] [addons] Executing deploy job rke-ingress-controller
INFO[0262] [ingress] ingress controller nginx deployed successfully
INFO[0262] [addons] Setting up user addons
INFO[0262] [addons] no user addons defined
INFO[0262] Finished building Kubernetes cluster successfully
|
Validate RKE deployment
copy the file "kube_config_cluster.yml" to .kube directory on home of onap-control-01 VM.
Code Block |
---|
ubuntu@onap-control-01:~/rke$ cd
ubuntu@onap-control-01:~$ mkdir .kube
ubuntu@onap-control-01:~$ cp rke/kube_config_cluster.yml .kube/
ubuntu@onap-control-01:~$ cd .kube/
ubuntu@onap-control-01:~/.kube$ ll
total 16
drwxrwxr-x 2 ubuntu ubuntu 4096 Jun 14 15:09 ./
drwxr-xr-x 8 ubuntu ubuntu 4096 Jun 14 15:09 ../
-rw-r----- 1 ubuntu ubuntu 5375 Jun 14 15:09 kube_config_cluster.yml
ubuntu@onap-control-01:~/.kube$ mv kube_config_cluster.yml config
ubuntu@onap-control-01:~/.kube$ ll
total 16
drwxrwxr-x 2 ubuntu ubuntu 4096 Jun 14 15:10 ./
drwxr-xr-x 8 ubuntu ubuntu 4096 Jun 14 15:09 ../
-rw-r----- 1 ubuntu ubuntu 5375 Jun 14 15:09 config |
In "onap-control-1" vm download kubectl to execute kubectl commands for the cluster:
Code Block |
---|
ubuntu@onap-control-01:~$ wget https://storage.googleapis.com/kubernetes-release/release/v1.19.9/bin/linux/amd64/kubectl
--2021-06-14 15:27:27-- https://storage.googleapis.com/kubernetes-release/release/v1.19.9/bin/linux/amd64/kubectl
Resolving storage.googleapis.com (storage.googleapis.com)... 142.250.72.112, 142.250.64.112, 142.250.64.80, ...
Connecting to storage.googleapis.com (storage.googleapis.com)|142.250.72.112|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 42987520 (41M) [application/octet-stream]
Saving to: ‘kubectl.1’
kubectl.1 100%[===============================================================================================================>] 41.00M 128MB/s in 0.3s
2021-06-14 15:27:31 (128 MB/s) - ‘kubectl.1’ saved [42987520/42987520]
ubuntu@onap-control-01:~$ chmod +x kubectl
ubuntu@onap-control-01:~$ sudo mv ./kubectl /usr/local/bin/kubectl |
Perform these above operations on all control nodes as well as worker nodes to run kubectl and helm commands
Create "onap" namespace and set that as default in kubernetes.
Code Block |
---|
ubuntu@onap-control-01:~$ kubectl create namespace onap
ubuntu@onap-control-01:~$ kubectl config set-context --current --namespace=onap |
Verify the kubernetes cluster
Code Block |
---|
ubuntu@onap-control-1:~$ kubectl get nodes -o=wide |
Result:
Install Helm
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
ubuntu@onap-control-01:~$ wget https://get.helm.sh/helm-v3.5.2-linux-amd64.tar.gz
ubuntu@onap-control-01:~$ tar -zxvf helm-v3.5.2-linux-amd64.tar.gz
ubuntu@onap-control-01:~$ sudo mv linux-amd64/helm /usr/local/bin/helm |
Initialize Kubernetes Cluster for use by Helm
Perform this on onap-control-1 VM only during the first setup.
Create folder for local charts repository on onap-control-01.
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ mkdir charts; chmod -R 777 charts
|
Run a docker server to serve local charts
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ docker run -d -p 8080:8080 -v $(pwd)/charts:/charts -e DEBUG=true -e STORAGE=local -e STORAGE_LOCAL_ROOTDIR=/charts chartmuseum/chartmuseum:latest |
Install helm chartmuseum plugin
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ helm plugin install https://github.com/chartmuseum/helm-push.git |
Setting up the NFS share for multinode kubernetes cluster:
Deploying applications to a Kubernetes cluster requires Kubernetes nodes to share a common, distributed filesystem. In this tutorial, we will setup an NFS Master, and configure all Worker nodes a Kubernetes cluster to play the role of NFS slaves.
It is recommneded that a separate VM, outside of the kubernetes cluster, be used. This is to ensure that the NFS Master does not compete for resources with Kubernetes Control Plane or Worker Nodes.
Launch new NFS Server VM instance
Select Ubuntu 18.04 as base image
Select Flavor
Networking
Apply customization script for NFS Server VM
Script to be added:
Code Block |
---|
#!/bin/bash
DOCKER_VERSION=18.09.5
export DEBIAN_FRONTEND=noninteractive
apt-get update
curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
cat > /etc/docker/daemon.json << EOF
{
"insecure-registries" : [ "nexus3.onap.org:10001","10.20.6.10:30000" ],
"log-driver": "json-file",
"log-opts": {
"max-size": "1m",
"max-file": "9"
},
"mtu": 1450,
"ipv6": true,
"fixed-cidr-v6": "2001:db8:1::/64",
"registry-mirrors": ["https://nexus3.onap.org:10001"]
}
EOF
sudo usermod -aG docker ubuntu
systemctl daemon-reload
systemctl restart docker
apt-mark hold docker-ce
IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
HOSTNAME=`hostname`
sudo echo "$IP_ADDR $HOSTNAME" >> /etc/hosts
docker login -u docker -p docker nexus3.onap.org:10001
sudo apt-get install make -y
# install nfs
sudo apt-get install nfs-common -y
sudo apt update
exit 0
|
This customization script will:
- Install docker and hold the docker version to 18.09.5
- insert hostname and IP address of the onap-nfs-server in the hosts file
- install nfs server
Resulting example
Configure NFS Share on Master node
Login into onap-nfs-server and perform the below commands
Create a master_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) node1_ip node2_ip ... nodeN_ip"
exit 1
}
if [ "$#" -lt 1 ]; then
echo "Missing NFS slave nodes"
usage
fi
#Install NFS kernel
sudo apt-get update
sudo apt-get install -y nfs-kernel-server
#Create /dockerdata-nfs and set permissions
sudo mkdir -p /dockerdata-nfs
sudo chmod 777 -R /dockerdata-nfs
sudo chown nobody:nogroup /dockerdata-nfs/
#Update the /etc/exports
NFS_EXP=""
for i in $@; do
NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) "
done
echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports
#Restart the NFS service
sudo exportfs -a
sudo systemctl restart nfs-kernel-server
|
Make the above created file as executable and run the script in the onap-nfs-server with the IP's of the worker nodes:
Code Block |
---|
chmod +x master_nfs_node.sh
sudo ./master_nfs_node.sh {list kubernetes worker nodes ip}
example from the WinLab setup:
sudo ./master_nfs_node.sh 10.31.4.21 10.31.4.22 10.31.4.23 10.31.4.24 10.31.4.25 10.31.4.26 10.31.4.27 10.31.4.28 10.31.4.29 10.31.4.30 |
Login into each kubernetes worker node, i.e. onap-k8s VMs and perform the below commands
Create a slave_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) nfs_master_ip"
exit 1
}
if [ "$#" -ne 1 ]; then
echo "Missing NFS mater node"
usage
fi
MASTER_IP=$1
#Install NFS common
sudo apt-get update
sudo apt-get install -y nfs-common
#Create NFS directory
sudo mkdir -p /dockerdata-nfs
#Mount the remote NFS directory to the local one
sudo mount $MASTER_IP:/dockerdata-nfs /dockerdata-nfs/
echo "$MASTER_IP:/dockerdata-nfs /dockerdata-nfs nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0" | sudo tee -a /etc/fstab
|
Make the above created file as executable and run the script in all the worker nodes:
Code Block |
---|
chmod +x slave_nfs_node.sh
sudo ./slave_nfs_node.sh {master nfs node IP address}
example from the WinLab setup:
sudo ./slave_nfs_node.sh 10.31.3.11 |
ONAP Installation
Perform the following steps in onap-control-01 VM.
Clone the OOM helm repository
Perform these on the home directory
- Clone oom repository with recursive submodules option
- Add deploy plugin to helm
- Add undeploy plugin to helm
- Add helm local repository to the local running server
Code Block |
---|
ubuntu@onap-control-01:~$ git clone -b master http://gerrit.onap.org/r/oom --recurse-submodules
ubuntu@onap-control-01:~$ helm plugin install ~/oom/kubernetes/helm/plugins/deploy
ubuntu@onap-control-01:~$ helm plugin install ~/oom/kubernetes/helm/plugins/undeploy
ubuntu@onap-control-01:~$ helm repo add local http://127.0.0.1:8080 |
Make charts from oom repository
Note |
---|
Do not use sudo to perform the 'make' operation |
This will take somewhere around 20-30 minutes of time to make all the helm charts and save the charts into local helm repository.
Code Block |
---|
ubuntu@onap-control-01:~$ cd ~/oom/kubernetes; make all -e SKIP_LINT=TRUE; make onap -e SKIP_LINT=TRUE
Using Helm binary helm which is helm version v3.5.2
[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'
[common]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting common
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, 0 chart(s) failed
Pushing common-8.0.0.tgz to local...
Done.
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[repositoryGenerator]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting repositoryGenerator
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, 0 chart(s) failed
Pushing repositoryGenerator-8.0.0.tgz to local...
Done.
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[readinessCheck]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 2 charts
Deleting outdated charts
==> Linting readinessCheck
[INFO] Chart.yaml: icon is recommended
..
..
..
..
[onap]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 39 charts
Downloading aaf from repo http://127.0.0.1:8080
Downloading aai from repo http://127.0.0.1:8080
Downloading appc from repo http://127.0.0.1:8080
Downloading cassandra from repo http://127.0.0.1:8080
Downloading cds from repo http://127.0.0.1:8080
Downloading cli from repo http://127.0.0.1:8080
Downloading common from repo http://127.0.0.1:8080
Downloading consul from repo http://127.0.0.1:8080
Downloading contrib from repo http://127.0.0.1:8080
Downloading cps from repo http://127.0.0.1:8080
Downloading dcaegen2 from repo http://127.0.0.1:8080
Downloading dcaegen2-services from repo http://127.0.0.1:8080
Downloading dcaemod from repo http://127.0.0.1:8080
Downloading holmes from repo http://127.0.0.1:8080
Downloading dmaap from repo http://127.0.0.1:8080
Downloading esr from repo http://127.0.0.1:8080
Downloading log from repo http://127.0.0.1:8080
Downloading sniro-emulator from repo http://127.0.0.1:8080
Downloading mariadb-galera from repo http://127.0.0.1:8080
Downloading msb from repo http://127.0.0.1:8080
Downloading multicloud from repo http://127.0.0.1:8080
Downloading nbi from repo http://127.0.0.1:8080
Downloading policy from repo http://127.0.0.1:8080
Downloading portal from repo http://127.0.0.1:8080
Downloading oof from repo http://127.0.0.1:8080
Downloading repository-wrapper from repo http://127.0.0.1:8080
Downloading robot from repo http://127.0.0.1:8080
Downloading sdc from repo http://127.0.0.1:8080
Downloading sdnc from repo http://127.0.0.1:8080
Downloading so from repo http://127.0.0.1:8080
Downloading uui from repo http://127.0.0.1:8080
Downloading vfc from repo http://127.0.0.1:8080
Downloading vid from repo http://127.0.0.1:8080
Downloading vnfsdk from repo http://127.0.0.1:8080
Downloading modeling from repo http://127.0.0.1:8080
Downloading platform from repo http://127.0.0.1:8080
Downloading a1policymanagement from repo http://127.0.0.1:8080
Downloading cert-wrapper from repo http://127.0.0.1:8080
Downloading roles-wrapper from repo http://127.0.0.1:8080
Deleting outdated charts
Skipping linting of onap
Pushing onap-8.0.0.tgz to local...
Done.
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
ubuntu@onap-control-01:~/oom/kubernetes$
|
Deploying ONAP
Deploying ONAP with helm command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
ubuntu@onap-control-01:~/oom/kubernetes$ helm deploy demo local/onap --namespace onap --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/onap-all.yaml -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/openstack.yaml --timeout 1200s
Output:
v3.5.2
/home/ubuntu/.local/share/helm/plugins/deploy/deploy.sh: line 92: [ -z: command not found
6
Use cache dir: /home/ubuntu/.local/share/helm/plugins/deploy/cache
0
0
/home/ubuntu/.local/share/helm/plugins/deploy/deploy.sh: line 126: expr--set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/onap-all.yaml -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/openstack.yaml --timeout 1200s: No such file or directory
0
fetching local/onap
history.go:56: [debug] getting history for release demo
install.go:173: [debug] Original chart version: ""
install.go:190: [debug] CHART PATH: /home/ubuntu/.local/share/helm/plugins/deploy/cache/onap
release "demo" deployed
release "demo-a1policymanagement" deployed
release "demo-aaf" deployed
release "demo-aai" deployed
release "demo-cassandra" deployed
release "demo-cds" deployed
release "demo-cert-wrapper" deployed
release "demo-cli" deployed
release "demo-consul" deployed
release "demo-contrib" deployed
release "demo-cps" deployed
release "demo-dcaegen2" deployed
release "demo-dcaegen2-services" deployed
release "demo-dcaemod" deployed
release "demo-dmaap" deployed
release "demo-esr" deployed
release "demo-holmes" deployed
release "demo-mariadb-galera" deployed
release "demo-modeling" deployed
release "demo-msb" deployed
release "demo-multicloud" deployed
release "demo-nbi" deployed
release "demo-oof" deployed
release "demo-platform" deployed
release "demo-policy" deployed
release "demo-portal" deployed
release "demo-repository-wrapper" deployed
release "demo-robot" deployed
release "demo-roles-wrapper" deployed
release "demo-sdc" deployed
release "demo-sdnc" deployed
release "demo-so" deployed
release "demo-uui" deployed
release "demo-vfc" deployed
release "demo-vid" deployed
release "demo-vnfsdk" deployed
6
ubuntu@onap-control-01:~/oom/kubernetes$ |
Verify the deploy:
Code Block |
---|
ubuntu@onap-control-01:~$ helm ls -n onap
NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION
demo onap 1 2021-07-13 15:14:35.025694014 +0000 UTC deployed onap-8.0.0 Honolulu
demo-a1policymanagement onap 1 2021-07-13 15:14:38.155669343 +0000 UTC deployed a1policymanagement-8.0.0 1.0.0
demo-aaf onap 1 2021-07-13 15:14:44.083961609 +0000 UTC deployed aaf-8.0.0
demo-aai onap 1 2021-07-13 15:15:43.238758595 +0000 UTC deployed aai-8.0.0
demo-cassandra onap 1 2021-07-13 15:16:32.632257395 +0000 UTC deployed cassandra-8.0.0
demo-cds onap 1 2021-07-13 15:16:42.884519209 +0000 UTC deployed cds-8.0.0
demo-cert-wrapper onap 1 2021-07-13 15:17:08.172161 +0000 UTC deployed cert-wrapper-8.0.0
demo-cli onap 1 2021-07-13 15:17:17.703468641 +0000 UTC deployed cli-8.0.0
demo-consul onap 1 2021-07-13 15:17:23.487068838 +0000 UTC deployed consul-8.0.0
demo-contrib onap 1 2021-07-13 15:17:37.10843864 +0000 UTC deployed contrib-8.0.0
demo-cps onap 1 2021-07-13 15:18:04.024754433 +0000 UTC deployed cps-8.0.0
demo-dcaegen2 onap 1 2021-07-13 15:18:21.92984273 +0000 UTC deployed dcaegen2-8.0.0
demo-dcaegen2-services onap 1 2021-07-13 15:19:27.147459081 +0000 UTC deployed dcaegen2-services-8.0.0 Honolulu
demo-dcaemod onap 1 2021-07-13 15:19:51.020335352 +0000 UTC deployed dcaemod-8.0.0
demo-dmaap onap 1 2021-07-13 15:20:23.115045736 +0000 UTC deployed dmaap-8.0.0
demo-esr onap 1 2021-07-13 15:21:48.99450393 +0000 UTC deployed esr-8.0.0
demo-holmes onap 1 2021-07-13 15:21:55.637545972 +0000 UTC deployed holmes-8.0.0
demo-mariadb-galera onap 1 2021-07-13 15:22:26.899830789 +0000 UTC deployed mariadb-galera-8.0.0
demo-modeling onap 1 2021-07-13 15:22:36.77062758 +0000 UTC deployed modeling-8.0.0
demo-msb onap 1 2021-07-13 15:22:43.955119743 +0000 UTC deployed msb-8.0.0
demo-multicloud onap 1 2021-07-13 15:22:57.122972321 +0000 UTC deployed multicloud-8.0.0
demo-nbi onap 1 2021-07-13 15:23:10.724184832 +0000 UTC deployed nbi-8.0.0
demo-oof onap 1 2021-07-13 15:23:21.867288517 +0000 UTC deployed oof-8.0.0
demo-policy onap 1 2021-07-13 15:26:33.741229968 +0000 UTC deployed policy-8.0.0
demo-portal onap 1 2021-07-13 15:29:42.334773742 +0000 UTC deployed portal-8.0.0
demo-repository-wrapper onap 1 2021-07-13 15:30:24.228522944 +0000 UTC deployed repository-wrapper-8.0.0
demo-robot onap 1 2021-07-13 15:30:36.103266739 +0000 UTC deployed robot-8.0.0
demo-roles-wrapper onap 1 2021-07-13 15:30:43.592035776 +0000 UTC deployed roles-wrapper-8.0.0
demo-sdc onap 1 2021-07-13 15:30:50.662463052 +0000 UTC deployed sdc-8.0.0
demo-so onap 1 2021-07-13 15:34:44.911711191 +0000 UTC deployed so-8.0.0
demo-uui onap 1 2021-07-13 15:55:27.84129364 +0000 UTC deployed uui-8.0.0
demo-vfc onap 1 2021-07-13 15:55:32.516727818 +0000 UTC deployed vfc-8.0.0
demo-vid onap 1 2021-07-13 15:56:02.048766897 +0000 UTC deployed vid-8.0.0
demo-vnfsdk onap 1 2021-07-13 15:56:19.960367033 +0000 UTC deployed vnfsdk-8.0.0
ubuntu@onap-control-01:~/oom/kubernetes$ |
In case of missing or failures in deployment.
If the deployment of any onap module fails, please go through these steps to redeploy the modules.
In this example, we demonstrate failure of dmaap, which normally occurs due to timeout issues.
Missing deployment
In the above deployment, demo-sdnc is missing. So we reinstall this.
Code Block |
---|
ubuntu@onap-control-01:~/oom/kubernetes$ helm install --namespace onap demo-sdnc local/sdnc --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/onap-all.yaml --timeout 1200s
NAME: demo-sdnc
LAST DEPLOYED: Tue Jul 13 16:11:58 2021
NAMESPACE: onap
STATUS: deployed
REVISION: 1
TEST SUITE: None
ubuntu@onap-control-01:~/oom/kubernetes$ |
Check the failed modules
perform 'helm ls' on the control node.
Code Block |
---|
ubuntu@onap-control-01:~$ helm ls -n onap
NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION
demo onap 1 2021-07-13 15:14:35.025694014 +0000 UTC deployed onap-8.0.0 Honolulu
demo-a1policymanagement onap 1 2021-07-13 15:14:38.155669343 +0000 UTC deployed a1policymanagement-8.0.0 1.0.0
demo-aaf onap 1 2021-07-13 15:14:44.083961609 +0000 UTC deployed aaf-8.0.0
demo-aai onap 1 2021-07-13 15:15:43.238758595 +0000 UTC deployed aai-8.0.0
demo-cassandra onap 1 2021-07-13 15:16:32.632257395 +0000 UTC deployed cassandra-8.0.0
demo-cds onap 1 2021-07-13 15:16:42.884519209 +0000 UTC deployed cds-8.0.0
demo-cert-wrapper onap 1 2021-07-13 15:17:08.172161 +0000 UTC deployed cert-wrapper-8.0.0
demo-cli onap 1 2021-07-13 15:17:17.703468641 +0000 UTC deployed cli-8.0.0
demo-consul onap 1 2021-07-13 15:17:23.487068838 +0000 UTC deployed consul-8.0.0
demo-contrib onap 1 2021-07-13 15:17:37.10843864 +0000 UTC deployed contrib-8.0.0
demo-cps onap 1 2021-07-13 15:18:04.024754433 +0000 UTC deployed cps-8.0.0
demo-dcaegen2 onap 1 2021-07-13 15:18:21.92984273 +0000 UTC deployed dcaegen2-8.0.0
demo-dcaegen2-services onap 1 2021-07-13 15:19:27.147459081 +0000 UTC deployed dcaegen2-services-8.0.0 Honolulu
demo-dcaemod onap 1 2021-07-13 15:19:51.020335352 +0000 UTC deployed dcaemod-8.0.0
demo-dmaap onap 1 2021-07-13 15:20:23.115045736 +0000 UTC deployed dmaap-8.0.0
demo-esr onap 1 2021-07-13 15:21:48.99450393 +0000 UTC deployed esr-8.0.0
demo-holmes onap 1 2021-07-13 15:21:55.637545972 +0000 UTC deployed holmes-8.0.0
demo-mariadb-galera onap 1 2021-07-13 15:22:26.899830789 +0000 UTC deployed mariadb-galera-8.0.0
demo-modeling onap 1 2021-07-13 15:22:36.77062758 +0000 UTC deployed modeling-8.0.0
demo-msb onap 1 2021-07-13 15:22:43.955119743 +0000 UTC deployed msb-8.0.0
demo-multicloud onap 1 2021-07-13 15:22:57.122972321 +0000 UTC deployed multicloud-8.0.0
demo-nbi onap 1 2021-07-13 15:23:10.724184832 +0000 UTC deployed nbi-8.0.0
demo-oof onap 1 2021-07-13 15:23:21.867288517 +0000 UTC deployed oof-8.0.0
demo-policy onap 1 2021-07-13 15:26:33.741229968 +0000 UTC deployed policy-8.0.0
demo-portal onap 1 2021-07-13 15:29:42.334773742 +0000 UTC deployed portal-8.0.0
demo-repository-wrapper onap 1 2021-07-13 15:30:24.228522944 +0000 UTC deployed repository-wrapper-8.0.0
demo-robot onap 1 2021-07-13 15:30:36.103266739 +0000 UTC deployed robot-8.0.0
demo-roles-wrapper onap 1 2021-07-13 15:30:43.592035776 +0000 UTC deployed roles-wrapper-8.0.0
demo-sdc onap 1 2021-07-13 15:30:50.662463052 +0000 UTC deployed sdc-8.0.0
demo-sdnc onap 1 2021-07-13 16:11:58.795467333 +0000 UTC deployed sdnc-8.0.0
demo-so onap 1 2021-07-13 15:34:44.911711191 +0000 UTC deployed so-8.0.0
demo-uui onap 1 2021-07-13 15:55:27.84129364 +0000 UTC deployed uui-8.0.0
demo-vfc onap 1 2021-07-13 15:55:32.516727818 +0000 UTC deployed vfc-8.0.0
demo-vid onap 1 2021-07-13 15:56:02.048766897 +0000 UTC deployed vid-8.0.0
demo-vnfsdk onap 1 2021-07-13 15:56:19.960367033 +0000 UTC deployed vnfsdk-8.0.0 |
Delete the failed module
use the right release name from the name as shown in helm ls.
The below commands will delete all the pods and dependencies.
Code Block |
---|
helm delete demo-dmaap
kubectl get persistentvolumeclaims -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash
kubectl get persistentvolumes -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash
kubectl get secrets -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete secrets -n onap \1/' | bash
kubectl get clusterrolebindings -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings -n onap \1/' | bash
kubectl get jobs -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete jobs -n onap \1/' | bash
kubectl get pods -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete pods -n onap \1/' | bash
|
Delete any residue data from onap-nfs-server.
Code Block |
---|
cd /dockerdata-nfs/
sudo rm -r demo-dmaap/ |
Reinstall module
Reinstall the deleted module with the same release name as used in the deletion
Code Block |
---|
helm install --namespace onap -n demo-dmaap local/dmaap --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/onap-all.yaml --timeout 1200s |
You can verify the deployment in a parallel terminal by checking the pods using the command
Code Block |
---|
kubectl get pods -n onap | grep demo-dmaap |
This shall show you the status of the upcoming pods during the deployment wait time.
Once this is deployed, you can verify using the "helm ls" command to check all the required modules are up and running.
Undeploy ONAP
For the release name 'demo' and namespace 'onap':
Perform these below commands in onap-control-1 where the helm was deployed.
Code Block |
---|
helm undeploy demo
kubectl get persistentvolumeclaims -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash
kubectl get persistentvolumes -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash
kubectl get secrets -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete secrets -n onap \1/' | bash
kubectl get clusterrolebindings -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings -n onap \1/' | bash
kubectl get jobs -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete jobs -n onap \1/' | bash
kubectl get pods -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete pods -n onap \1/' | bash
|
Perform the below commands in onap-nfs-server.
This is to delete all the network shared data which will not be deleted on purge delete of helm release.
Code Block |
---|
cd /dockerdata-nfs/
sudo rm -r *
e.g.
ubuntu@onap-nfs-server:~$ cd /dockerdata-nfs/
ubuntu@onap-nfs-server:/dockerdata-nfs$ sudo rm -r * |
Access SDN-R
ODLUX-GUI at winlab
The {username} should be replaced by your user id created in orbit-lab.
Code Block |
---|
SSH from your machine to create tunnels with given ports on console.sb10.orbit.org:
hanif@ubuntu:~$ ssh -L 30267:localhost:30267 -L 30205:localhost:30205 {usename}@console.sb10.orbit-lab.org
SSH from console.sb10.orbit.org to create tunnels with given ports on node1-4.sb10.orbit.org:
hanif@console:~$ ssh -L 30267:localhost:30267 -L 30205:localhost:30205 native@node1-4
SSH from node1-4.sb10.orbit.org to create tunnels with given ports on onap-control-01:
native@node1-4:~$ ssh -L 30267:localhost:30267 -L 30205:localhost:30205 ubuntu@10.31.4.11
|
On your browser:
Code Block |
---|
http://localhost:30267/odlux/index.html
|
The login credentials are:
username: admin
password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
ODLUX-GUI at your labs
Check the IP on the sdnc service bound to port 8282:
Code Block |
---|
ubuntu@onap-control-01:~$ kubectl get service -n onap | grep sdnc
sdnc NodePort 10.43.101.189 <none> 8443:30267/TCP 2d21h
sdnc-ansible-server ClusterIP 10.43.46.219 <none> 8000/TCP 2d21h
sdnc-callhome NodePort 10.43.139.27 <none> 6666:30266/TCP 2d21h
sdnc-cluster ClusterIP None <none> 2550/TCP 2d21h
sdnc-dgbuilder NodePort 10.43.24.71 <none> 3000:30203/TCP 2d21h
sdnc-dmaap-listener ClusterIP None <none> <none> 2d21h
sdnc-oam ClusterIP 10.43.227.206 <none> 8282/TCP,8202/TCP 2d21h
sdnc-ueb-listener ClusterIP None <none> <none> 2d21h
sdnc-web-service NodePort 10.43.211.74 <none> 8443:30205/TCP 2d21h
so-sdnc-adapter ClusterIP 10.43.20.58 <none> 8086/TCP 2d21h |
Troubleshooting
Documentation for troubleshooting.
ES-DB index read only – NFS out of disc space
ONAP log (elastic DB) consumes approx 1 GB per day. If disc space crosses a threshold, indindices of SDNC elastic DB are set to read-only.
** FORBIDDEN/12/index read-only / allow delete (api)] **
Housekeeping of elastic db can be done by Curator.
install curator
pip install elasticsearch-curator
Code Block | ||
---|---|---|
| ||
#show indices with size
curator_cli show_indices --verbose
curator_cli show_indices --verbose|wc -l
# delete older indices
# test with dry run
curator --dry-run delete_index.yml
# delete!
curator delete_index.yml |
delete_index.yml
Code Block | ||
---|---|---|
| ||
---
actions:
1:
action: delete_indices
description: >-
Delete indices older than 45 days (based on index name), for logstash-
prefixed indices. Ignore the error if the filter does not result in an
actionable list of indices (ignore_empty_list) and exit cleanly.
options:
ignore_empty_list: True
timeout_override:
continue_if_exception: False
disable_action: False
filters:
- filtertype: pattern
kind: prefix
value: logstash-
exclude:
- filtertype: age
source: name
direction: older
timestring: '%Y.%m.%d'
unit: days
unit_count: 30
exclude:
|
configuration of curator:
/home/ubuntu/.curator/curator.yml for curator-cli
/etc/curator/config.yaml for curator
Code Block | ||
---|---|---|
| ||
client:
hosts:
- 127.0.0.1
port: 30254
url_prefix:
use_ssl: False
certificate:
client_cert:
client_key:
ssl_no_validate: False
http_auth:
timeout: 30
master_only: False
logging:
loglevel: INFO
logfile:
|
Define as a cron job (e.g. every 24h)
Code Block | ||
---|---|---|
| ||
00 6 * * * root curator /home/ubuntu/curator/delete-indices.yml — config /etc/curator/config.yml |
Set SDNC elastic DB indices back to read-write
Code Block | ||
---|---|---|
| ||
PUT _settings
{
"index": {
"blocks": {
"read_only_allow_delete": "false"
}
}
} |
helm repo add local http://127.0.0.1:8080