Page History

...

App to do loss calculations for links. 

May Can be opened via the Network Map, data gets preset.

...

ODLUX NetworkMap, in that case data is preset.

GUI

Image Added

DesignMode

• geo coordinates can be entered manually
• the distance between the selected coordinates will be calculated automatically
• frequency band can be entered manually 
• rainfall rate can be entered manually or set by the ITU recommendation (ITU-R P.837-7)
  • The Digital Map of rain data from (ITU-R P.837-7) is used (the map covers entire surface of the Earth)
  • The rain attenuation model from ITU-R P.838-3 is used. (dB/km)

View Mode

• relevant parameters are passed in via the url (from the network map)
  • Geo locations of the two points
  • Distance (when available)
• the user cannot change the lat/lon values of the link
• rainfall rate is auto-filled (according to ITU-R P.837-7)

Loss Calculations

The following loss calculations should be performed by the link calculator:

• FSL (dB) (ITU-R P.525-4)
• Rain Loss (dB) (ITU-R P.838-3)
• Gaseous Loss (Oxygen and water vapor) (ITU-R P.676-12)
  • Water vapor density (ITU-R P.836-6)
  • Surface Temperature (ITU-R P.1510-1)
• Dual Polarization loss (H V)

Architecture

Note on Link Calculation

Originally, the link calculation should have been included in the ODLUX NetworkMap.

After further discussions, the decision was made to move the link calculation functionality into a new app. 

The link calculator accesses the topology-api server to do its calculations.

Use Case

Interfaces

URL

odluxurl?lat1={siteA.lat}&lon1={siteA.lon}&lat2={siteB.lat}&lon2={siteB.lon}&siteA={nameA}&siteB={nameB}&azimuthA={azimuth}&azimuthB={azimuth}&distance={distance}