Code Block | ||||
---|---|---|---|---|
| ||||
data_typestosca.datatypes.asd.extCpdData: ExtCpdData: version: 0.1 versionderived_from: 1.0tosca.datatypes.Root description: "Describes the datatype for exposed service external connection point definition data" properties: id: description: "The identifier of this extCpdData" required: true type: string description: description: > This property describes for a particular ExtCpd instance what service it exposes. required: true type: string virtualLinkRequirementvirtual_link_requirement: description: > Refers in an abstract way to the network or multiple networks that the ExtCpd shall be exposed on (ex: OAM, EndUser, backhaul, LI, etc) required: true type: string networkInterfaceRequirementsnetwork_interface_realization_requirements: description: > Details container implementation specific requirements on the NetworkAttachmentDefinition required: false type: datatypetosca.datatypes.asd.networkInterfaceRequirements inputParamMappingsinput_param_mappings: description: > Information on what helm chart input parameters that are required to be configured for this extCpd required: false type: datatypetosca.datatypes.asd.paramMappings resourceMappingresource_mapping: description: > Kubernetes API resource name for the resource manifest for the service, ingress controller or pod required: false type: string |
Code Block | ||||
---|---|---|---|---|
| ||||
tosca.datatypes.asd.networkInterfaceRequirements: derived_from: tosca.datatypes.Root version: 0.1 description: "Describes the datatype for network interface requirements" properties: trunk_mode: description: > Information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other). When operating in "trunk mode", the Cp is capable of carrying traffic for several VLANs. Absence of this property implies that trunkMode is not configured for the Cp i.e. It is equivalent to boolean value "false". required: true type: boolean default: false ipam: description: > Identifies whether application expects IP address assignment to be managed by the cluster infrastructure (CNI IPAM plugin), or configured by orchestrator via for example helm input parameter, or if IP assignment is handled by the application itself. required: true type: string constraints: - valid_values: ["infraProvided", "orchestrated", "userManaged"] default: "infraProvided" interface_type: description: > Indicates what type of network interface the application expects. Kernel based virtual netdev based on CNIs such as ovs | bridge | macvlan | ipvlan, or PCIe dev directly visible in application namespace with kernel or userspace driver or bonded with the Bond CNI, or userspace-CNI based network interface (requires DPDK-OVS/VPP vSwitch). required: true type: string constraints: - valid_values: ["kernel.netdev", "direct.userdriver", "direct.kerneldriver", "direct.bond", "userspace"] default: "kernel.netdev" interface_option: description: > This attribute describes verified realization options for the network interface in question. Currently listed options (virtio and memif) are applicable for the interfaceType “userspace”. required: false type: list entry_schema: type: string constraints: - valid_values: [“virtio", "memif“] interface_redundancy: description: > Identifies switch-plane redundancy method the application uses, and that node infrastructure is required to comply with. "infraProvided", “left” and “right”: The container sees a single vNIC that a) the infrastructure bonds over both switchplanes or b) that is connected to the network via only left or right the switchplane. The other cases are for a mated pair of vnics connecting to same network, but where one vNIC connects via left switch plane and the other via right switch plane, and where the application manages the redundancy. "activePassiveBond": the application bonds with move of MAC address. "activeActiveBond“: bonded left/right links must be part of a multi-chassis LAG "activePassiveL3": application will move application IP address between the vNICs. "activeActiveL3": the application uses anycast/ECMP. required: true type: string constraints: - valid_values: ["infraProvided", "actPassBond", "actActBond", "actPassL3", "actActL3", "Left", "Right"] default: "infraProvided" nic_options: description: > Identifies for the direct.userdriver interface type, the physical nics the driver is verified to work with. Allowed values for nic types must be handled via a registry or be standardized. required: false type: list entry_schema: type: string |
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
tosca.datatypes.asd.paramMappings:
version: 0.1
derived_from: tosca.datatypes.Root
description: "Describes the datatype for parameter mapping"
properties:
loadbalancer_IP:
description: >
When present, this attribute specifies the name of the deployment
artifact input parameter through which the orchestrator can
configure the loadbalancerIP parameter of the K8s service
or ingress controller that the extCpdData represents.
Note: The format of the Content strings is specific for each different
orchestration templating technology used (Helm, Teraform, etc.).
Currently only a format for use with Helm charts is suggested:
"<helmchartname>:[<subchartname>.]^(0..N)[<parentparamname>.]^(0..N)<paramname>".
Whether the optional parts of the format are present depends on how the
parameter is declared in the helm chart. An example is:
"chartName:subChart1.subChart2.subChart3.Parent1.Parent2.Parent3.LBIP".
required: false
type: string
external_IPs:
description: >
When present, this attribute specifies the name of the deployment
artifact input parameter through which the orchestrator can
configure the extermalIPs parameter of the K8s service or ingress
controller, or the pod network interface annotation, that the
extCpdData represents.
Note: The format of the Content strings is specific for each different
orchestration templating technology used (Helm, Teraform, etc.).
Currently only a format for use with Helm charts is suggested:
"<helmchartname>:[<subchartname>.]^(0..N)[<parentparamname>.]^(0..N)<paramname>".
Whether the optional parts of the format are present depends on how the
parameter is declared in the helm chart. An example is:
"chartName:subChart1.subChart2.subChart3.Parent1.Parent2.Parent3.extIP".
required: false
type: list
entry_schema:
type: string
nad_names:
description: >
Specifies, for an extCpdData respesenting a secondary network interface,
the name(s) of the deployment artifact input parameter(s) through which
the orchestrator can provide the names of the network attachment
definitions (NADs) the orchestrator has created as base for the network
interface the extCpdData represents.
Note 1: When the extCpdData represent a networkRedundant/mated-pair of
sriov interfaces, there are references to 2 or 3 related NADs needed
to be passed, while for other interface types only one NAD reference
is needed to be passed.
Note 2: The format of the Content strings is specific for each different
orchestration templating technology used (Helm, Teraform, etc.).
Currently only a format for use with Helm charts is suggested:
"<helmchartname>:[<subchartname>.]^(0..N)[<parentparamname>.]^(0..N)<paramname>".
Whether the optional parts of the format are present depends on how the
parameter is declared in the helm chart. An example is:
chartName:"subChart1.subChart2.subChart3.Parent1.Parent2.Parent3.nadName".
Note 3: A direct attached (passthrough) network interface, such as an sriov
interface, attaches to a network via only one of the two switch planes
in the infrastructure.
When using a direct attached network interface one therefore commonly in a
pod uses a mated pair of sriov network attachments, where each interface
attaches same network but via different switchplane.
The application uses the mated pair of network interfaces as a single
logical “swith-path-redundant” network interface – and this is represented
by a single extCpdData.
Also there is a case where a third “bond” attachment interface is used in
the pod, bonding the two direct interfaces so that the application do not
need to handle the redundancy issues – application just uses the bond interface.
In this case, all three attachments are together making up a logical
“switch-path-redundant” network interface represented by a single extCpdData.
When three NADs are used in the extCpdData the NAD implementing the bond attachment
interface is provided through the parameter indicated in the third place in
the nadNames attribute.
required: false
type: list
entry_schema:
type: string
nad_namespace:
description: >
Specifies, for an extCpdData respesenting a secondary network interface,
the name of the deployment artifact input parameter through which the orchestrator
can provide the namespace where the NetworkAttachmentDefinitions (NADs) are located.
Attribute may be omitted if the namespace is same as the application
namespace.
Note: The format of the Content strings is specific for each different
orchestration templating technology used (Helm, Teraform, etc.).
Currently only a format for use with Helm charts is suggested:
"<helmchartname>:[<subchartname>.]^(0..N)[<parentparamname>.]^(0..N)<paramname>".
Whether the optional parts of the format are present depends on how the
parameter is declared in the helm chart. An example is:
"chartName:subChart1.subChart2.subChart3.Parent1.Parent2.Parent3.NameSpace".
required: false
type: string |
Code Block | ||||
---|---|---|---|---|
| ||||
tosca.datatypes.asd.enhancedClusterCapabilities:
version: 0.1
derived_from: tosca.datatypes.Root
description: "Describes the datatype for parameter mapping"
properties:
min_kernel_version:
description: >
Describes the minimal required Kernel version, e.g. 4.15.0.
Coded as displayed by linux command uname –r
required: true
type: string
required_kernel_modules:
description: >
Required kernel modules are coded as listed by linux lsmod command,
e.g. ip6_tables, cryptd, nf_nat etc.
required: false
type: list
entry_schema:
type: string
conflicting_kernel_modules:
description: >
Kernel modules, which must not be present in the target environment.
The kernel modules are coded as listed by linux lsmod command,
e.g., ip6_tables, cryptd, nf_nat etc.
Example: Linux kernel SCTP module, which would conflict with use of
proprietary user space SCTP stack provided by the application.
required: false
type: list
entry_schema:
type: string
required_custom_resources:
description: >
List the custom resource kinds required to be supported in the target
environment. The list shall include those custom resource kinds which
are not delivered with the application.
required: false
type: list
entry_schema:
type: tosca.datatypes.asd.customResourceRequirement
cluster_labels:
description: >
This attribute allows to associate arbitrary labels to clusters.
These can indicate special infrastructure capabilities (e.g., NW acceleration,
GPU compute, etc.). The intent of these labels is to serve as a set of
values that can help in application placement decisions.
clusterLabels follow the Kubernetes label key-value-nomenclature
(https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/).
It is recommended that labels follow a standardized meaning e.g. for node
features (https://kubernetes-sigs.github.io/node-feature-discovery/v0.9/get-started/features.html#table-of-contents).
Example:
ClusterLabels
- feature.node.kubernetes.io/cpu-cpuid.AESNI: true
required: false
type: list
entry_schema:
type: string
required_plugin:
description: a list of the name of the required K8s plugin
required: false
type: list
entry_schema:
type: tosca.datatypes.asd.requiredPlugin |
Code Block | ||||
---|---|---|---|---|
| ||||
tosca.datatypes.asd.customResourceRequirement:
version: 0.1
derived_from: tosca.datatypes.Root
description: >
kind: "Redis", apiVersion: "kubedb.com/v1alpha1"
properties:
kind:
description: "the name of the custom resource requirement"
type: string
required: true
api_version:
description: "the api version of the custom resource requirement"
type: string
required: true |
Code Block | ||||
---|---|---|---|---|
| ||||
tosca.datatypes.asd.requiredPlugin:
version: 0.1
derived_from: tosca.datatypes.Root
description: "the required K8s plugin"
properties:
name:
description: "the name of the required K8s plugin"
type: string
required: true
version:
description: "the version of the required K8s plugin"
type: string
required: true |