Versions Compared

Old Version 6

changes.mady.by.user Vijay Venkatesh Kumar

Saved on

compared with

New Version Current

changes.mady.by.user Vijay Venkatesh Kumar

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Project NameEnter the name of the project
Target Release NameFrankfurt
Project Lifecycle StateIncubation. Refer to ONAP Charter, section 3.3 Project Lifecycle for further information
Participating Company AT&T, Nokia, Ericsson, Wipro, IBM, TechM, Orange, ChinaMobile, Huawei

Scope

What is this release trying to address?

...

  • VES Collector (security)
  • PRH (common sdk)
  • SON-handler
  • DFC (security)

Frankfurt Features with DCAE Impact

 Image Removed

Note: Features highlighted in RED need further discussion with owners; not committed yet

Frankfurt Usecases with DCAE Impact

Image Removed

Non-Functional Requirement 


  • Self-Serve Control Loops
  • Policy Update Notifications
  • 5G / OOF SON Enhancement
  • 5G / Run-time Data Persistency
  • Modeling: 5G / ORAN & 3GPP Standards Harmonization
  • 5G / Bulk PM / PM Control
  • 5G / Bulk PM / Secure Communication between xNFs and ONAP
  • 5G / PM dictionary
  • PNF / Plug and Play

 

Non-Functional Requirement 

  • VESCollector EnhancementsVESCollector Enhancements
    • DCAEGEN2-1594 – VESCollector healthcheck support when authentication is enabled; Validation blocked by DCAEGEN2-1757 – spring version issue
    • DCAEGEN2-1483  – Event publish order issue
    • DCAEGEN2-1484  - Set dynamic partitionkey (stretch goal)
    • DCAEGEN2-1774 - Optimize VES schema load by retain in-memory than loading file each time (dint find corresponding jira, created new today)
    • DCAEGEN2-608   - Performance/benchmarking
    • DCAEGEN2-1776  - Remove certOnly and basicAuth from authentication methods
    • DCAEGEN2-1779  - Switch VES collector's K8s health checks to HTTPS
  • TCA-gen2 delivery and replace TCA/cdap (DCAEGEN2-1907)
    • Mongodb support for tca-gen2
  • Deployment optimization (Plugin load, reduce bootstrap, Cloudify version syncupupgrade)
  • Python 3.x Plugin upgrade (5.0.5 - Cloudify mock available; 5.1 – full python 3.x)
  • Python 3.x support (DCAEGEN2-1519)
    • DCAEGEN2-1548 - Python 3.x upgrade for Policy Lib
  • DCAE Dashboard Fixes and security updates
  • Automated test improvement (csit/robot)
  • DCAE Helm chart org (OOM-1574)(transfer dependent on OOM team)
  • Multi-site registry alignment (DCAEGEN2-1879) - (stretch goal)
  • DCAE TLS init container improvement 
  • OTI Phase1 (contribute new platform component) (DCAEGEN2-1908)
    • OTI Integration impacts following components (k8splugin, stateful set support, OTI-handler, OTI-EventProc, CBS*, kube2pyconsul, PG*, Nginxproxy, bp-gen). For Frankfurt, OTI-Handler and OTI-Event proc component seed code will be delivered and integrated with ONAP CI process. The full platform integration will be deferred to Guilin release.
  • DL Handlers integration DCAEGEN2-1849
  • MOD Integration DCAEGEN2-1852
  • Sonar coverage improvement (60% target for Frankfurt) (stretch goal)

Platform Maturity

 Platform Maturity (i.e., S3P items)  https://wiki.onap.org/display/DW/Dublin+Release+Platform+Maturity

 Green color → Target level ( details see Platform Maturity below)

      • Performance:  Level 1
      • Stability: Level 2
      • Resiliency: Level 2
      • Security: Level 1+
      • Scalability: Level 1
      • Manageability: Level 1+
      • Usability: Level 2                   

Minimum Viable Product

The MVP of DCAE will include the necessary subcomponents supporting the primary objectives: meeting platform maturity goals and supporting the use cases.

    •   Cloudify Manager
    •   Consul (deployed/managed by OOM)
    •   DeploymentHander
    •   Policy-Handler
    •   ServiceChangeHandler
    •   Inventory-API
    •   Postgres
    •   ConfigBinding Service
    •   Dashboard
    •   DCAE-MOD
      • genprocessor
      • webui
      • distributorapi
      • runtimeapi
      • onboardingapi
      • blueprint-generator

DCAE Service specific components

    •   VESCollector
    •   TCA (Analytics application)
    •   PRH
    •   HV_VES

Functionalities

    • (DCAEGEN2-1901)
  • Outstanding OJSI Jira (OJSI Tickets Status)
  • Java 11 Upgrade (DCAEGEN2-1918) (stretch goal)
  • Following additional TSC MUST have requirement will be handled in this release.
    • Document current upgrade component strategy
    • SECCOM Perform Software Composition Analysis - Vulnerability tables
    • SECCOM Password removal from OOM HELM charts
      • No DCAE impacts identified; will handle new charts contribution for MOD to align with Security needs.

    • SECCOM HTTPS communication vs. HTTP

      config-binding-service30415
      dashboard30418


Platform Maturity

 Platform Maturity (i.e., S3P items)  Frankfurt Release Platform Maturity

 Green color → Target level ( details see Platform Maturity below)

      • Performance:  Level 1
      • Stability: Level 2
      • Resiliency: Level 2
      • Security: Level 1+
      • Scalability: Level 1
      • Manageability: Level 1+
      • Usability: Level 1+             

Minimum Viable Product

The MVP of DCAE will include the necessary subcomponents supporting the primary objectives: meeting platform maturity goals and supporting the use cases.

    •   Cloudify Manager
    •   Consul (deployed/managed by OOM)
    •   DeploymentHander
    •   Policy-Handler
    •   ServiceChangeHandler
    •   Inventory-API
    •   Postgres
    •   ConfigBinding Service
    •   Dashboard
    •   DCAE-MOD
      • genprocessor
      • webui
      • distributorapi
      • runtimeapi
      • onboardingapi
      • blueprint-generator

DCAE Service specific components

    •   VESCollector
    •   TCA (Analytics application)/TCA-gen2
    •   PRH
    •   HV_VES

Functionalities

List the functionalities List the functionalities that this release is committing to deliver by providing a link to JIRA Epics and Stories. In the JIRA Priority field, specify the priority (either High, Medium, Low). The priority will be used in case de-scoping is required. Don't assign High priority to all functionalities.

...

Sub-components are repositories and are consolidated in a single centralized place. Edit the Resouce and Repositories in the centralized page.

...

DeliverableRepository Maven Group ID

Components Description

pmsh

dcaegen2/services

org.onap.dcaegen2.services.pmsh

PM Subscription Handler

tca-gen2dcaegen2/analytics/tca-gen2  

org.onap.dcaegen2.analytics.tca-gen2

Standalone TCA
heartbeatdcaegen2/services/heartbeat org.onap.dcaegen2.services.heartbeat Missing Heartbeat Micro Services




ONAP ONAP Dependencies

List the other ONAP projects you depend on.

...

  • AAI: DCAE MS retrieves and updates VNF data from/to AAI
  • DMaaP: Message bus for communication with other components in the solution
  • Policy - For managing application configuration policy
  • CLAMP - For CL flow related MS instantiation and configuration
  • OOF - For SON handler support

...

Refering to CII Badging Security Program and Platform Maturity Requirements, fill out the table below by indicating the actual level , the targeted level for the current release and the evidences on how you plan to achieve the targeted level.

AreaActual LevelTargeted Level for current ReleaseHow, EvidencesComments
Performance11
+

    • Level 0: no performance testing done
    • Level 1: baseline performance criteria identified and measured  (such as response time, transaction/message rate, latency, footprint, etc. to be defined on per component)
    • Level 2: performance improvement plan created 
    • Level 3: performance improvement plan implemented for 1 release (improvement measured for equivalent functionality & equivalent hardware)
Stability2

Level 2

Level 2  - Dependent on integration team support

2




    • Level 0: none beyond release requirements
    • Level 1: 72 hour component-level soak test (random test transactions with 80% code coverage; steady load)
    • Level 2: 72 hour platform-level soak test (random test transactions with 80% code coverage; steady load)
    • Level 3: track record over 6 months of reduced defect rate
Resiliency22
    • 0 – none
    • 1 – manual failure and recovery (< 30 minutes)
    • 2 – automated detection and recovery (single site)
    • 3 – automated detection and recovery (geo redundancy)
Security1

1+  (Most DCAE components are complaint; will address remaining in Frankfurt based on resource availability)



    • Level 0: None
    • Level 1: CII Passing badge
      • Including no critical and high known vulnerabilities > 60 days old
    • Level 2: CII Silver badge, plus:
      • All internal/external system communications shall be able to be encrypted.
      • All internal/external service calls shall have common role-based access control and authorization using CADI framework.
    • Level 3: CII Gold badge 
Scalability1

1



    • Level 0: no ability to scale
    • Level 1: supports single site horizontal scale out and scale in, independent of other components
    • Level 2: supports geographic scaling, independent of other components
    • Level 3: support scaling (interoperability) across multiple ONAP instances
Manageability1

1+

  (Except logging, all other requirements are met)



    • Level 1:
Level 1:
    • All ONAP components will use a single logging system.
    • Instantiation of a simple ONAP system should be accomplished in <1 hour with a minimal footprint
    • Level 2:
      • A component can be independently upgraded without impacting operation interacting components
      • Component configuration to be externalized in a common fashion across ONAP projects
      • All application logging to adhere to ONAP Application Logging Specification v1.2
      • Implement guidelines for a minimal container footprint
    • Level 3
      • Transaction tracing across components
Usability1
2 (STRETCH GOAL- based on resource availability)

1+



    • Level 1:
      • User guide created
      • Deployment documentation
      • API documentation
      • Adherence to coding guidelines
    • Level 2:
    • Level 3
      • Consistent UI across ONAP projects
      • Usability testing conducted
      • API Documentation
    • Level 4


  • API Incoming Dependencies

...

API NameAPI DescriptionAPI Definition DateAPI Delivery dateAPI Definition link (i.e.swagger)
VES IngestionCollectorAPI for VNFs to send VES dataCurrently AvailableR3
DCAE Deployment HandlerNB API for invoking the deployment of DCAE subcomponentsCurrently AvailableR3
DCAE InventoryAPI for Add/Delete DCAE copy's TOSCA modelsCurrently AvailableR3
HealthcheckAPI for querying DCAE component healthcheck Currently AvailableR4
DCAE Onboarding APIAPI for publishing DCAE spec into MODWill be available around M3R6
DCAE InventoryAPI for CLAMP to retrieve flow informationWill be available around M3R6

...

NameDescriptionVersion
NIFIApache NIFI1.9.x
Cloudify Manager

cloudifyplatform/community

19.01.24
Consul

CDAP

caskdata/cdap-standalone

4.1.2
PNDA
4.5



In case there are specific dependencies  (Centos 7 vs Ubuntu 16. Etc.) list them as well.

...

This section is used to document a limitation on a functionality or platform support. We are currently aware of this limitation and it will be delivered in a future Release. List identified release gaps (if any), and its impact.

Gaps identifiedImpact
OTI Function deliveryOTI functionality is planned to be introduced in phase. For Frankfurt, seed code for OTI-Handler and EventPRoc will be delivered. The complete e2e functionality will be available in next release. There is no impact to Frankfurt usecase by this functionality.To fill outTo fill out

  • Known Defects and Issues

Provide a link toward the list of all known project bugs.

...

List the risks identified for this release along with the plan to prevent the risk to occur (mitigation) and the plan of action in the case the risk would materialized (contingency).

Risk identifiedMitigation PlanContingency Plan
To fill outTo fill out

Cloudify support for Python 3.x not available during Frankfurt timeframe. This impacts migration of Cloudify and associated plugins in Frankfurt (DCAEGEN2-1546)

Continue El-Alto version of Cloudify and Plugins under python 2.7None

  • Resources

Fill out the out the Resources Committed to the Release centralized page.


  • Release Milestone

The milestones are defined at the Release Level and all the supporting project agreed to comply with these dates.

...

This section is optional and may be used to document internal milestones within a project team or multiple project teams. For instance, in the case the team has made agreement with other team to deliver some artifacts on a certain date that are not in the release milestone, it is erecommended to provide these agreements and dates in this section.

It is not expected to have a detailed project plan.

this section.

It is not expected to have a detailed project plan.

DateSprint#No of days Deliverable

  -  

DCAE Frankfurt Sprint 114
  • Seed code for new components
  • jjb definition for verify/merge/sonar/clm

  -  

DCAE Frankfurt Sprint 215 
  • Atleast 75% of Functional delivery
  • Atleast 30% of release/compliance (coverage & security)
  • Successful container build (new components)
  • SDK version for Frankfurt to be baselined and released

  -  

DCAE Frankfurt Sprint 315
  • 95% of Functional delivery
  • Atleast 70% of release/compliance (coverage & security)
  • API definition formalized
  • Integration test plan completed
  • CSIT/automated test delivery

M2/M3 checkpoint - 1/21

  -  

DCAE Frankfurt Sprint 4 15


  • API definition formalized and shared with impacted teams
  • 100% Functionality
  • Atleast 90% of release/complaince (coverage & security)
  • CSIT/automated test completed for new components
  • Documentation repo updates (API updates & new MS/component) - Frankfurt Documentation
  • Deployment artifacts (helm for platform component; spec file and/or blueprint for service component)  & onap integration

 -  

DCAE Frankfurt Sprint 515 

M4   

  • 100% of release/compliance (coverage & security)
  • Validate deployment/integration with ONAP/DCAE deploy
  • Documentation update for deployment/configuration/architecture/logging
  • Update wiki for new components deployment for usecase owners
  • Demo for new components introduced
  • Pair-wise testing

  -  

DCAE Frankfurt Sprint 6 (RC prep) 15

RC0

  • Fix Integration blockers
  • Automated robot test, CSIT & daily build jobs must pass
  • Release java artifacts
  • Release docker containers
  • Update OOM chart/blueprint/documentation to reflect correct version
  • Branching
DateProjectDeliverableTo fill outTo fill outTo fill out

  • Documentation, Training


      • Highlight the team contributions to the specific document related to he project (Config guide, installation guide...).
      • Highlight the team contributions to the overall Release Documentation and training asset
      • High level list of documentation, training and tutorials necessary to understand the release capabilities, configuration and operation.
      • Documentation includes items such as:
        • Installation instructions
        • Configuration instructions
        • Developer guide
        • End User guide
        • Admin guide

...