Table of Contents |
---|
Overview
For ONAP SDN-R load and stress test and Proof of concept, June 19 a three node SDN-R cluster is used. Version is El Alto.
...
draw.io Diagram | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OpenStack Preparation
Required Security Groups Rules
Installing Kubernetes and Rancher
Create the Rancher 3 nodes control cluster named as onap-control on OpenStack
The following instructions describe how to create 3 OpenStack VMs to host the Highly-Available Kubernetes Control Plane. ONAP workloads will not be scheduled on these Control Plane nodes.
Launch new VMs in OpenStack.
Select Ubuntu
...
20.04 as the boot image for the virtual machine without any volume
Select
...
m4.large flavor
Networking
Apply customization script for Control Plane VMs
The script to be copied:
Code Block |
---|
#!/bin/bash DOCKER_VERSION=1819.09.5 KUBECTL_VERSION=1.13.5 HELM_VERSION=2.12.3 export DEBIAN_FRONTEND=noninteractive03.15 sudo apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh cat > /etc/docker/daemon.json << EOF { "insecure-registries" : [ "nexus3.onap.org:10001" ], "log-driver": "json-file", "log-opts": { "max-size": "1m", "max-file": "9" }, "mtu": 1450, "ipv6": true, "fixed-cidr-v6": "2001:db8:1::/64", "registry-mirrors": ["https://nexus3.onap.org:10001"] } EOF sudo usermod -aG docker ubuntu sudo systemctl daemon-reload sudo systemctl restart docker sudo apt-mark hold docker-ce IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'` HOSTNAME=`hostname` sudo echo "$IP_ADDR $HOSTNAME" >> /etc/hosts docker login -u docker -p docker nexus3.onap.org:10001 sudo apt-get install make -y #nfs server wget https://storage.googleapis.com/kubernetes-release/release/v$KUBECTL_VERSION/bin/linux/amd64/kubectl chmod +x kubectl sudo mv ./kubectl /usr/local/bin/kubectl wget http://storage.googleapis.com/kubernetes-helm/helm-v${HELM_VERSION}-linux-amd64.tar.gz tar -zxvf helm-v${HELM_VERSION}-linux-amd64.tar.gz sudo mv linux-amd64/helm /usr/local/bin/helm sudo apt-get update sudo apt-get install nfs-kernel-server -y sudo mkdir -p /dockerdata-nfs sudo chown nobody:nogroup /dockerdata-nfs/ exit 0 |
This customization script will:
- Update Ubuntu
- Install docker and hold the docker version to 1819.0903.515
- set hosts file with IP and hostname
- install make
- download and install kubectl
- download and install helmnfs-kernel-server
Launched Instances
Create the Kubernetes 12 nodes worker cluster named as onap-
...
workers on OpenStack cloud
The following instructions describe how to create OpenStack VMs to host the Highly-Available Kubernetes Workers. ONAP workloads will only be scheduled on these nodes.
Launch new VM instances in OpenStack
Select Ubuntu
...
20.04 as base image
Select Flavor
The size of Kubernetes hosts depend on the size of the ONAP deployment being installed.
If a small subset of ONAP applications are being deployed (i.e. for testing purposes), then 16GB or 32GB may be sufficient.
Networking
Apply customization script for Kubernetes VM(s)
The scrip to be copied:
Code Block |
---|
#!/bin/bash DOCKER_VERSION=1819.0903.5 KUBECTL_VERSION=1.13.5 export DEBIAN_FRONTEND=noninteractive15 sudo apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh mkdir -p /etc/systemd/system/docker.service.d/ cat > /etc/systemd/system/docker.service.d/dockerdaemon.confjson << EOF [Service] ExecStart= ExecStart=/usr/bin/dockerd -H fd:// --insecure-registry={ "insecure-registries" : [ "nexus3.onap.org:10001 EOF sudo usermod -" ], "log-driver": "json-file", "log-opts": { "max-size": "1m", "max-file": "9" }, "mtu": 1450, "ipv6": true, "fixed-cidr-v6": "2001:db8:1::/64", "registry-mirrors": ["https://nexus3.onap.org:10001"] } EOF sudo usermod -aG docker ubuntu sudo systemctl daemon-reload sudo systemctl restart docker sudo apt-mark hold docker-ce IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'` HOSTNAME=`hostname` sudo echo "$IP_ADDR $HOSTNAME" >> /etc/hosts docker login -u docker -p docker nexus3.onap.org:10001 sudo apt-get install make -y wget https://storage.googleapis.com/kubernetes-release/release/v$KUBECTL_VERSION/bin/linux/amd64/kubectl chmod +x kubectl sudo mv ./kubectl /usr/local/bin/kubectl sudo apt-get update # install nfs sudo apt-get install nfs-common -y exit 0 |
This customization script will:
- Update Ubuntu
- Install docker and hold the docker version to 1819.0903.515
- insert hostname and IP in the hosts file
- install nfs common
- download and install kubectl
...
Launched onap-workers instances
Configure Rancher Kubernetes Engine
Install RKE
Download and install RKE on a VM, desktop or laptopthe onap-control-01 VM. Binaries can be found here for Linux and Mac: https://github.com/rancher/rke/releases/tagdownload/v0v1.2.17/
Perform this on linux based personal laptop, local machine or a on the onap-control-01 VM which has the connectivity key to access the created VMs on OpenStack and whose key has been configured during creation of VMs.
In our setup, the key of OpenStack controller has been used also been placed in onap-control-01 and used to login into VMs, so these steps have been performed on OpenStack controlleronap-control-01 VM.
Code Block |
---|
mkdir rke cd rke/ wget https://github.com/rancher/rke/releases/download/v0v1.2.17/rke_linux-amd64 mv rke_linux-amd64 rke chmod 754 rke |
RKE requires a cluster.yml as input. An example file is show below that describes a Kubernetes cluster that will be mapped onto the OpenStack VMs created earlier in this guide.
Example: cluster.yml
The example file:
Code Block |
---|
# An example of an HA Kubernetes cluster for ONAP nodes: - address: 10.31.34.211 port: "22" role: - controlplane - etcd hostname_override: "onap-control-101" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.312 port: "22" role: - controlplane - etcd hostname_override: "onap-control-202" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.1613 port: "22" role: - controlplane - etcd hostname_override: "onap-control-303" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.3921 port: "22" role: - worker hostname_override: "onap-k8sworkers-101" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.2422 port: "22" role: - worker hostname_override: "onap-k8sworkers-202" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.5223 port: "22" role: - worker hostname_override: "onap-k8sworkers-303" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.824 port: "22" role: - worker hostname_override: "onap-k8sworkers-404" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.3425 port: "22" role: - worker hostname_override: "onap-k8sworkers-505" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.4726 port: "22" role: - worker hostname_override: "onap-k8sworkers-606" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.1527 port: "22" role: - worker hostname_override: "onap-k8sworkers-707" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.928 port: "22" role: - worker hostname_override: "onap-k8sworkers-808" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.529 port: "22" role: - worker hostname_override: "onap-k8sworkers-909" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" - address: 10.31.34.2130 port: "22" role: - worker hostname_override: "onap-k8sworkers-10" user: ubuntu ssh_key_path: "~/.ssh/id_rsaecdsa" services: kube- addressapi: service_cluster_ip_range: 10.3143.30.10/16 port: "22" role: pod_security_policy: false - worker hostname_override: "onap-k8s-11" always_pull_images: false userkube-controller: ubuntu sshcluster_key_pathcidr: "~/.ssh/id_rsa" - address10.42.0.0/16 service_cluster_ip_range: 10.3143.30.680/16 portkubelet: "22" role:cluster_domain: cluster.local - worker hostname_override: "onap-k8s-12" user: ubuntu cluster_dns_server: 10.43.0.10 fail_swap_on: false network: plugin: canal authentication: strategy: x509 ssh_key_path: "~/.ssh/id_rsaecdsa" services: kube-apissh_agent_auth: false authorization: service_cluster_ip_range: 10.43.0.0/16 pod_security_policy: false always_pull_images: false kube-controller: cluster_cidr: 10.42.0.0/16 service_cluster_ip_range: 10.43.0.0/16 kubelet: cluster_domain: cluster.local cluster_dns_server: 10.43.0.10 fail_swap_on: false network: plugin: canal authentication: strategy: x509 ssh_key_path: "~/.ssh/id_rsa" ssh_agent_auth: false authorization: mode: rbac ignore_docker_version: false kubernetes_version: "v1.13.5-rancher1-2" private_registries: - url: nexus3.onap.org:10001 user: docker password: docker is_default: true cluster_name: "onap" restore: restore: false snapshot_name: "" |
Prepare cluster.yml
Before this configuration file can be used the IP address must be mapped for each control and worker node in this file.
Run RKE
From within the same directory as the cluster.yml file, simply execute:
native@node1-1:~/rke$ ./rke up
Code Block |
---|
./rke up |
The output will look something like:
mode: rbac
ignore_docker_version: false
kubernetes_version: "v1.19.9-rancher1-1"
private_registries:
- url: nexus3.onap.org:10001
user: docker
password: docker
is_default: true
cluster_name: "onap"
restore:
restore: false
snapshot_name: "" |
Prepare cluster.yml
Before this configuration file can be used the IP address must be mapped for each control and worker node in this file.
Run RKE
From within the same directory as the cluster.yml file, simply execute:
ubuntu@onap-control-01:~/rke$ ./rke up
Code Block |
---|
./rke up |
The output will look something like:
Code Block |
---|
ubuntu@onap-control-01:~/rke$ ./rke up
INFO[0000] Running RKE version: v1.2.7 |
Code Block |
native@node1-1:~/rke$ ./rke up INFO[0000] Initiating Kubernetes cluster INFO[0000] [certificatesdialer] Setup tunnel Generatingfor CA kubernetes certificateshost [10.31.4.26] INFO[0000] [certificatesdialer] GeneratingSetup Kubernetestunnel APIfor server aggregation layer requestheader client CA certificates host [10.31.4.29] INFO[0000] [certificatesdialer] Setup Generatingtunnel Kubernetesfor API server certificateshost [10.31.4.24] INFO[0000] [certificatesdialer] Setup Generatingtunnel Servicefor account token keyhost [10.31.4.27] INFO[0000] [certificatesdialer] Generating Kube Controller certificatesSetup tunnel for host [10.31.4.25] INFO[00010000] [certificatesdialer] Setup Generatingtunnel Nodefor certificate host [10.31.4.11] INFO[00010000] [certificatesdialer] Setup Generatingtunnel adminfor certificates and kubeconfighost [10.31.4.22] INFO[00010000] [certificatesdialer] GeneratingSetup Kubernetestunnel APIfor server proxy client certificates . . . . . . . . . . . . INFO[0309] [addons] Setting up Metrics Server INFO[0309] [addons] Saving ConfigMap for addon rke-metrics-addon to Kubernetes INFO[0309] [addons] Successfully saved ConfigMap for addon rke-metrics-addon to Kubernetes INFO[0309] [addons] Executing deploy job rke-metrics-addon INFO[0315] [addons] Metrics Server deployed successfully INFO[0315] [ingress] Setting up nginx ingress controller INFO[0315host [10.31.4.30] INFO[0000] [dialer] Setup tunnel for host [10.31.4.21] INFO[0000] [dialer] Setup tunnel for host [10.31.4.13] INFO[0000] [dialer] Setup tunnel for host [10.31.4.28] INFO[0000] [dialer] Setup tunnel for host [10.31.4.12] INFO[0000] [dialer] Setup tunnel for host [10.31.4.23] . . . . . . . . . . . . INFO[0236] [sync] Successfully synced nodes Labels and Taints INFO[0236] [network] Setting up network plugin: canal INFO[0236] [addons] Saving ConfigMap for addon rke-ingressnetwork-controllerplugin to Kubernetes INFO[03160236] [addons] Successfully saved ConfigMap for addon rke-ingressnetwork-controllerplugin to Kubernetes INFO[03160236] [addons] Executing deploy job rke-ingressnetwork-controllerplugin INFO[03220241] [ingressaddons] ingress controller nginx deployed successfully INFO[0322] [addons] Setting up user addons INFO[0322 Setting up coredns INFO[0241] [addons] no user addons defined INFO[0322] Finished building Kubernetes cluster successfully |
Validate RKE deployment
copy the file "kube_config_cluster.yml" to onap-control-1 VM.
In the VM/system where the rke was executed. In Winlab it is node1-1 (OpenStack controller node).
example: to perform sftp to connect to onap-control-1 node:
Code Block |
---|
native@node1-1:~/rke$ sftp ubuntu@10.31.3.2
Connected to 10.31.3.2.
sftp> put kube_config_cluster.yml
sftp> exit
These steps can also be done using scp as (assuming that the controller has '.kube' folder):
native@node1-1:~/rke$ scp kube_config_cluster.yml ubuntu@10.31.3.2:~/.kube/config |
login into onap-control-1 VM and move the "kube_config_cluster.yml" file into .kube/ folder and rename the file to "config.onap":
In "onap-control-1" vm:
Code Block |
---|
ubuntu@onap-control-1:~$ mkdir .kube
ubuntu@onap-control-1:~$ mv kube_config_cluster.yml .kube/config
ubuntu@onap-control-1:~$ kubectl config set-context --current --namespace=onap |
Perform these above operations on all control nodes as well as worker nodes to run kubectl and helm commands
Code Block |
---|
mkdir .kube
mv kube_config_cluster.yml .kube/config
kubectl config set-context --current --namespace=onap |
Verify the kubernetes cluster
Code Block |
---|
ubuntu@onap-control-1:~$ kubectl get nodes -o=wide |
Result:
Initialize Kubernetes Cluster for use by Helm
Perform this on onap-control-1 VM only during the first setup.
Code Block |
---|
kubectl -n kube-system create serviceaccount tiller
kubectl create clusterrolebinding tiller --clusterrole=cluster-admin --serviceaccount=kube-system:tiller
helm init --service-account tiller
kubectl -n kube-system rollout status deploy/tiller-deploy
|
Setting up the NFS share for multinode kubernetes cluster:
Deploying applications to a Kubernetes cluster requires Kubernetes nodes to share a common, distributed filesystem. In this tutorial, we will setup an NFS Master, and configure all Worker nodes a Kubernetes cluster to play the role of NFS slaves.
It is recommneded that a separate VM, outside of the kubernetes cluster, be used. This is to ensure that the NFS Master does not compete for resources with Kubernetes Control Plane or Worker Nodes.
Launch new NFS Server VM instance
Select Ubuntu 18.04 as base image
Select Flavor
Networking
Apply customization script for NFS Server VM
Script to be added:
Code Block |
---|
#!/bin/bash
DOCKER_VERSION=18.09.5
export DEBIAN_FRONTEND=noninteractive
apt-get update
curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
mkdir -p /etc/systemd/system/docker.service.d/
cat > /etc/systemd/system/docker.service.d/docker.conf << EOF
[Service]
ExecStart=
ExecStart=/usr/bin/dockerd -H fd:// --insecure-registry=nexus3.onap.org:10001
EOF
sudo usermod -aG docker ubuntu
systemctl daemon-reload
systemctl restart docker
apt-mark hold docker-ce
IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
HOSTNAME=`hostname`
sudo echo "$IP_ADDR $HOSTNAME" >> /etc/hosts
docker login -u docker -p docker nexus3.onap.org:10001
sudo apt-get install make -y
# install nfs
sudo apt-get install nfs-common -y
sudo apt update
exit 0
|
This customization script will:
- Install docker and hold the docker version to 18.09.5
- insert hostname and IP address of the onap-nfs-server in the hosts file
- install nfs server
Resulting example
Configure NFS Share on Master node
Login into onap-nfs-server and perform the below commands
Create a master_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) node1_ip node2_ip ... nodeN_ip"
exit 1
}
if [ "$#" -lt 1 ]; then
echo "Missing NFS slave nodes"
usage
fi
#Install NFS kernel
sudo apt-get update
sudo apt-get install -y nfs-kernel-server
#Create /dockerdata-nfs and set permissions
sudo mkdir -p /dockerdata-nfs
sudo chmod 777 -R /dockerdata-nfs
sudo chown nobody:nogroup /dockerdata-nfs/
#Update the /etc/exports
NFS_EXP=""
for i in $@; do
NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) "
done
echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports
#Restart the NFS service
sudo exportfs -a
sudo systemctl restart nfs-kernel-server
|
Make the above created file as executable and run the script in the onap-nfs-server with the IP's of the worker nodes:
Code Block |
---|
chmod +x master_nfs_node.sh
sudo ./master_nfs_node.sh {list kubernetes worker nodes ip}
example from the WinLab setup:
sudo ./master_nfs_node.sh 10.31.3.39 10.31.3.24 10.31.3.52 10.31.3.8 10.31.3.34 10.31.3.47 10.31.3.15 10.31.3.9 10.31.3.5 10.31.3.21 10.31.3.1 10.31.3.68 |
Login into each kubernetes worker node, i.e. onap-k8s VMs and perform the below commands
Create a slave_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) nfs_master_ip"
exit 1
}
if [ "$#" -ne 1 ]; then
echo "Missing NFS mater node"
usage
fi
MASTER_IP=$1
#Install NFS common
sudo apt-get update
sudo apt-get install -y nfs-common
#Create NFS directory
sudo mkdir -p /dockerdata-nfs
#Mount the remote NFS directory to the local one
sudo mount $MASTER_IP:/dockerdata-nfs /dockerdata-nfs/
echo "$MASTER_IP:/dockerdata-nfs /dockerdata-nfs nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0" | sudo tee -a /etc/fstab
|
Make the above created file as executable and run the script in all the worker nodes:
Code Block |
---|
chmod +x slave_nfs_node.sh
sudo ./slave_nfs_node.sh {master nfs node IP address}
example from the WinLab setup:
sudo ./slave_nfs_node.sh 10.31.3.11 |
ONAP Installation
Perform the following steps in onap-control-1 VM.
Clone the OOM helm repository
Use the master branch as Dublin branch is not available.
Perform these on the home directory
Code Block |
---|
git clone -b <branch> "https://gerrit.onap.org/r/oom" --recurse-submodules
mkdir .helm
cp -R ~/oom/kubernetes/helm/plugins/ ~/.helm
cd oom/kubernetes/sdnc |
Edit the values.yaml file
Code Block |
---|
...
# Add sdnrwt as true at the end of the config
config:
...
sdnrwt: true
|
Add sdnrwt value under config in the file.
Save the file.
navigate to templates folder:
Code Block |
---|
cd templates/ |
Edit the statefulset.yaml file
Code Block |
---|
...
spec:
...
template:
...
spec:
...
containers:
- name: {{ include "common.name" . }}
...
...
# add sdnrwt flag set to true under env
env:
...
- name: SDNRWT
value: "{{ .Values.config.sdnrwt}}" |
Add SDNRWT environment parameter and its value reference.
Save the file.
Edit the service.yaml file
Code Block |
---|
...
spec:
type: {{ .Values.service.type }}
ports:
{{if eq .Values.service.type "NodePort" -}}
...
- port: {{ .Values.service.externalPort4 }}
targetPort: {{ .Values.service.internalPort4 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort4 }}
name: "{{ .Values.service.portName }}-8443"
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
name: {{ .Values.service.portName }}
{{- end}}
selector:
app: {{ include "common.name" . }}
release: {{ .Release.Name }}
type: NodePort
sessionAffinity: ClientIP
externalTrafficPolicy: Cluster
sessionAffinityConfig:
clientIP:
timeoutSeconds: 10800
status:
loadBalancer: {}
--- |
Append type NodePort, session affinity, session affinity config and load balancer parameters in service.
Copy override files
Code Block |
---|
cd
cp -r ~/oom/kubernetes/onap/resources/overrides .
cd overrides/ |
Edit the onap-all.yaml file
Code Block |
---|
# Copyright © 2019 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
###################################################################
# This override file enables helm charts for all ONAP applications.
###################################################################
cassandra:
enabled: true
mariadb-galera:
enabled: true
aaf:
enabled: true
aai:
enabled: true
appc:
enabled: true
cds:
enabled: true
clamp:
enabled: true
cli:
enabled: true
consul:
enabled: true
contrib:
enabled: true
dcaegen2:
enabled: true
dmaap:
enabled: true
esr:
enabled: true
log:
enabled: true
sniro-emulator:
enabled: true
oof:
enabled: true
msb:
enabled: true
multicloud:
enabled: true
nbi:
enabled: true
policy:
enabled: true
pomba:
enabled: true
portal:
enabled: true
robot:
enabled: true
sdc:
enabled: true
sdnc:
enabled: true
config:
sdnrwt: true
so:
enabled: true
uui:
enabled: true
vfc:
enabled: true
vid:
enabled: true
vnfsdk:
enabled: true
modeling:
enabled: true
|
Save the file.
Start helm server
go to home directory and start helm server and local repository.
Code Block |
---|
cd
helm serve & |
Hit on ENTER key to come out of helm serve if it shows some logs
Add helm repository
Note the port number that is listed and use it in the Helm repo add as follows
Code Block |
---|
helm repo add local http://127.0.0.1:8879 |
Verify helm repository
Code Block |
---|
helm repo list |
output:
Saving ConfigMap for addon rke-coredns-addon to Kubernetes
INFO[0241] [addons] Successfully saved ConfigMap for addon rke-coredns-addon to Kubernetes
INFO[0241] [addons] Executing deploy job rke-coredns-addon
INFO[0251] [addons] CoreDNS deployed successfully
INFO[0251] [dns] DNS provider coredns deployed successfully
INFO[0251] [addons] Setting up Metrics Server
INFO[0251] [addons] Saving ConfigMap for addon rke-metrics-addon to Kubernetes
INFO[0251] [addons] Successfully saved ConfigMap for addon rke-metrics-addon to Kubernetes
INFO[0251] [addons] Executing deploy job rke-metrics-addon
INFO[0256] [addons] Metrics Server deployed successfully
INFO[0256] [ingress] Setting up nginx ingress controller
INFO[0256] [addons] Saving ConfigMap for addon rke-ingress-controller to Kubernetes
INFO[0257] [addons] Successfully saved ConfigMap for addon rke-ingress-controller to Kubernetes
INFO[0257] [addons] Executing deploy job rke-ingress-controller
INFO[0262] [ingress] ingress controller nginx deployed successfully
INFO[0262] [addons] Setting up user addons
INFO[0262] [addons] no user addons defined
INFO[0262] Finished building Kubernetes cluster successfully
|
Validate RKE deployment
copy the file "kube_config_cluster.yml" to .kube directory on home of onap-control-01 VM.
Code Block |
---|
ubuntu@onap-control-01:~/rke$ cd
ubuntu@onap-control-01:~$ mkdir .kube
ubuntu@onap-control-01:~$ cp rke/kube_config_cluster.yml .kube/
ubuntu@onap-control-01:~$ cd .kube/
ubuntu@onap-control-01:~/.kube$ ll
total 16
drwxrwxr-x 2 ubuntu ubuntu 4096 Jun 14 15:09 ./
drwxr-xr-x 8 ubuntu ubuntu 4096 Jun 14 15:09 ../
-rw-r----- 1 ubuntu ubuntu 5375 Jun 14 15:09 kube_config_cluster.yml
ubuntu@onap-control-01:~/.kube$ mv kube_config_cluster.yml config
ubuntu@onap-control-01:~/.kube$ ll
total 16
drwxrwxr-x 2 ubuntu ubuntu 4096 Jun 14 15:10 ./
drwxr-xr-x 8 ubuntu ubuntu 4096 Jun 14 15:09 ../
-rw-r----- 1 ubuntu ubuntu 5375 Jun 14 15:09 config |
In "onap-control-1" vm download kubectl to execute kubectl commands for the cluster:
Code Block |
---|
ubuntu@onap-control-01:~$ wget https://storage.googleapis.com/kubernetes-release/release/v1.19.9/bin/linux/amd64/kubectl
--2021-06-14 15:27:27-- https://storage.googleapis.com/kubernetes-release/release/v1.19.9/bin/linux/amd64/kubectl
Resolving storage.googleapis.com (storage.googleapis.com)... 142.250.72.112, 142.250.64.112, 142.250.64.80, ...
Connecting to storage.googleapis.com (storage.googleapis.com)|142.250.72.112|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 42987520 (41M) [application/octet-stream]
Saving to: ‘kubectl.1’
kubectl.1 100%[===============================================================================================================>] 41.00M 128MB/s in 0.3s
2021-06-14 15:27:31 (128 MB/s) - ‘kubectl.1’ saved [42987520/42987520]
ubuntu@onap-control-01:~$ chmod +x kubectl
ubuntu@onap-control-01:~$ sudo mv ./kubectl /usr/local/bin/kubectl |
Perform these above operations on all control nodes as well as worker nodes to run kubectl and helm commands
Create "onap" namespace and set that as default in kubernetes.
Code Block |
---|
ubuntu@onap-control-01:~$ kubectl create namespace onap
ubuntu@onap-control-01:~$ kubectl config set-context --current --namespace=onap |
Verify the kubernetes cluster
Code Block |
---|
ubuntu@onap-control-1:~$ kubectl get nodes -o=wide |
Result:
Install Helm
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
ubuntu@onap-control-01:~$ wget https://get.helm.sh/helm-v3.5.2-linux-amd64.tar.gz
ubuntu@onap-control-01:~$ tar -zxvf helm-v3.5.2-linux-amd64.tar.gz
ubuntu@onap-control-01:~$ sudo mv linux-amd64/helm /usr/local/bin/helm |
Initialize Kubernetes Cluster for use by Helm
Perform this on onap-control-1 VM only during the first setup.
Create folder for local charts repository on onap-control-01.
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ mkdir charts; chmod -R 777 charts
|
Run a docker server to serve local charts
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ docker run -d -p 8080:8080 -v $(pwd)/charts:/charts -e DEBUG=true -e STORAGE=local -e STORAGE_LOCAL_ROOTDIR=/charts chartmuseum/chartmuseum:latest |
Install helm chartmuseum plugin
Code Block | ||||
---|---|---|---|---|
| ||||
ubuntu@onap-control-01:~$ helm plugin install https://github.com/chartmuseum/helm-push.git |
Setting up the NFS share for multinode kubernetes cluster:
Deploying applications to a Kubernetes cluster requires Kubernetes nodes to share a common, distributed filesystem. In this tutorial, we will setup an NFS Master, and configure all Worker nodes a Kubernetes cluster to play the role of NFS slaves.
It is recommneded that a separate VM, outside of the kubernetes cluster, be used. This is to ensure that the NFS Master does not compete for resources with Kubernetes Control Plane or Worker Nodes.
Launch new NFS Server VM instance
Select Ubuntu 18.04 as base image
Select Flavor
Networking
Apply customization script for NFS Server VM
Script to be added:
Code Block |
---|
#!/bin/bash
DOCKER_VERSION=18.09.5
export DEBIAN_FRONTEND=noninteractive
apt-get update
curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh
cat > /etc/docker/daemon.json << EOF
{
"insecure-registries" : [ "nexus3.onap.org:10001","10.20.6.10:30000" ],
"log-driver": "json-file",
"log-opts": {
"max-size": "1m",
"max-file": "9"
},
"mtu": 1450,
"ipv6": true,
"fixed-cidr-v6": "2001:db8:1::/64",
"registry-mirrors": ["https://nexus3.onap.org:10001"]
}
EOF
sudo usermod -aG docker ubuntu
systemctl daemon-reload
systemctl restart docker
apt-mark hold docker-ce
IP_ADDR=`ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}'`
HOSTNAME=`hostname`
sudo echo "$IP_ADDR $HOSTNAME" >> /etc/hosts
docker login -u docker -p docker nexus3.onap.org:10001
sudo apt-get install make -y
# install nfs
sudo apt-get install nfs-common -y
sudo apt update
exit 0
|
This customization script will:
- Install docker and hold the docker version to 18.09.5
- insert hostname and IP address of the onap-nfs-server in the hosts file
- install nfs server
Resulting example
Configure NFS Share on Master node
Login into onap-nfs-server and perform the below commands
Create a master_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) node1_ip node2_ip ... nodeN_ip"
exit 1
}
if [ "$#" -lt 1 ]; then
echo "Missing NFS slave nodes"
usage
fi
#Install NFS kernel
sudo apt-get update
sudo apt-get install -y nfs-kernel-server
#Create /dockerdata-nfs and set permissions
sudo mkdir -p /dockerdata-nfs
sudo chmod 777 -R /dockerdata-nfs
sudo chown nobody:nogroup /dockerdata-nfs/
#Update the /etc/exports
NFS_EXP=""
for i in $@; do
NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) "
done
echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports
#Restart the NFS service
sudo exportfs -a
sudo systemctl restart nfs-kernel-server
|
Make the above created file as executable and run the script in the onap-nfs-server with the IP's of the worker nodes:
Code Block |
---|
chmod +x master_nfs_node.sh
sudo ./master_nfs_node.sh {list kubernetes worker nodes ip}
example from the WinLab setup:
sudo ./master_nfs_node.sh 10.31.4.21 10.31.4.22 10.31.4.23 10.31.4.24 10.31.4.25 10.31.4.26 10.31.4.27 10.31.4.28 10.31.4.29 10.31.4.30 |
Login into each kubernetes worker node, i.e. onap-k8s VMs and perform the below commands
Create a slave_nfs_node.sh file as below:
Code Block | ||
---|---|---|
| ||
#!/bin/bash
usage () {
echo "Usage:"
echo " ./$(basename $0) nfs_master_ip"
exit 1
}
if [ "$#" -ne 1 ]; then
echo "Missing NFS mater node"
usage
fi
MASTER_IP=$1
#Install NFS common
sudo apt-get update
sudo apt-get install -y nfs-common
#Create NFS directory
sudo mkdir -p /dockerdata-nfs
#Mount the remote NFS directory to the local one
sudo mount $MASTER_IP:/dockerdata-nfs /dockerdata-nfs/
echo "$MASTER_IP:/dockerdata-nfs /dockerdata-nfs nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0" | sudo tee -a /etc/fstab
|
Make the above created file as executable and run the script in all the worker nodes:
Code Block |
---|
chmod +x slave_nfs_node.sh
sudo ./slave_nfs_node.sh {master nfs node IP address}
example from the WinLab setup:
sudo ./slave_nfs_node.sh 10.31.3.11 |
ONAP Installation
Perform the following steps in onap-control-01 VM.
Clone the OOM helm repository
Perform these on the home directory
- Clone oom repository with recursive submodules option
- Add deploy plugin to helm
- Add undeploy plugin to helm
- Add helm local repository to the local running server
Code Block |
---|
ubuntu@onap-control-01:~$ git clone -b master http://gerrit.onap.org/r/oom --recurse-submodules
ubuntu@onap-control-01:~$ helm plugin install ~/oom/kubernetes/helm/plugins/deploy
ubuntu@onap-control-01:~$ helm plugin install ~/oom/kubernetes/helm/plugins/undeploy
ubuntu@onap-control-01:~$ helm repo add local http://127.0.0.1:8080 |
Make charts from oom repository
Note |
---|
Do not use sudo to perform the 'make' operation |
This will take somewhere around 20-30 minutes of time to make all the helm charts and save the charts into local helm repository.
Code Block |
---|
ubuntu@onap-control-01:~$ cd ~/oom/kubernetes; make all -e SKIP_LINT=TRUE; make onap -e SKIP_LINT=TRUE
Using Helm binary helm which is helm version v3.5.2
[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'
[common]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting common
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, 0 chart(s) failed
Pushing common-8.0.0.tgz to local...
Done.
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[repositoryGenerator]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting repositoryGenerator
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, 0 chart(s) failed
Pushing repositoryGenerator-8.0.0.tgz to local...
Done.
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
[readinessCheck]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 2 charts
Deleting outdated charts
==> Linting readinessCheck
[INFO] Chart.yaml: icon is recommended
..
..
..
..
[onap]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 39 charts
Downloading aaf from repo http://127.0.0.1:8080
Downloading aai from repo http://127.0.0.1:8080
Downloading appc from repo http://127.0.0.1:8080
Downloading cassandra from repo http://127.0.0.1:8080
Downloading cds from repo http://127.0.0.1:8080
Downloading cli from repo http://127.0.0.1:8080
Downloading common from repo http://127.0.0.1:8080
Downloading consul from repo http://127.0.0.1:8080
Downloading contrib from repo http://127.0.0.1:8080
Downloading cps from repo http://127.0.0.1:8080
Downloading dcaegen2 from repo http://127.0.0.1:8080
Downloading dcaegen2-services from repo http://127.0.0.1:8080
Downloading dcaemod from repo http://127.0.0.1:8080
Downloading holmes from repo http://127.0.0.1:8080
Downloading dmaap from repo http://127.0.0.1:8080
Downloading esr from repo http://127.0.0.1:8080
Downloading log from repo http://127.0.0.1:8080
Downloading sniro-emulator from repo http://127.0.0.1:8080
Downloading mariadb-galera from repo http://127.0.0.1:8080
Downloading msb from repo http://127.0.0.1:8080
Downloading multicloud from repo http://127.0.0.1:8080
Downloading nbi from repo http://127.0.0.1:8080
Downloading policy from repo http://127.0.0.1:8080
Downloading portal from repo http://127.0.0.1:8080
Downloading oof from repo http://127.0.0.1:8080
Downloading repository-wrapper from repo http://127.0.0.1:8080
Downloading robot from repo http://127.0.0.1:8080
Downloading sdc from repo http://127.0.0.1:8080
Downloading sdnc from repo http://127.0.0.1:8080
Downloading so from repo http://127.0.0.1:8080
Downloading uui from repo http://127.0.0.1:8080
Downloading vfc from repo http://127.0.0.1:8080
Downloading vid from repo http://127.0.0.1:8080
Downloading vnfsdk from repo http://127.0.0.1:8080
Downloading modeling from repo http://127.0.0.1:8080
Downloading platform from repo http://127.0.0.1:8080
Downloading a1policymanagement from repo http://127.0.0.1:8080
Downloading cert-wrapper from repo http://127.0.0.1:8080
Downloading roles-wrapper from repo http://127.0.0.1:8080
Deleting outdated charts
Skipping linting of onap
Pushing onap-8.0.0.tgz to local...
Done.
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
ubuntu@onap-control-01:~/oom/kubernetes$
|
Deploying ONAP
Deploying ONAP with helm command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
ubuntu@onap-control-01:~/oom/kubernetes$ helm deploy demo local/onap --namespace onap --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/onap-all.yaml -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/openstack.yaml --timeout 1200s
Output:
v3.5.2
/home/ubuntu/.local/share/helm/plugins/deploy/deploy.sh: line 92: [ -z: command not found
6
Use cache dir: /home/ubuntu/.local/share/helm/plugins/deploy/cache
0
0
/home/ubuntu/.local/share/helm/plugins/deploy/deploy.sh: line 126: expr--set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/onap-all.yaml -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/openstack.yaml --timeout 1200s: No such file or directory
0
fetching local/onap
history.go:56: [debug] getting history for release demo
install.go:173: [debug] Original chart version: ""
install.go:190: [debug] CHART PATH: /home/ubuntu/.local/share/helm/plugins/deploy/cache/onap
release "demo" deployed
release "demo-a1policymanagement" deployed
release "demo-aaf" deployed
release "demo-aai" deployed
release "demo-cassandra" deployed
release "demo-cds" deployed
release "demo-cert-wrapper" deployed
release "demo-cli" deployed
release "demo-consul" deployed
release "demo-contrib" deployed
release "demo-cps" deployed
release "demo-dcaegen2" deployed
release "demo-dcaegen2-services" deployed
release "demo-dcaemod" deployed
release "demo-dmaap" deployed
release "demo-esr" deployed
release "demo-holmes" deployed
release "demo-mariadb-galera" deployed
release "demo-modeling" deployed
release "demo-msb" deployed
release "demo-multicloud" deployed
release "demo-nbi" deployed
release "demo-oof" deployed
release "demo-platform" deployed
release "demo-policy" deployed
release "demo-portal" deployed
release "demo-repository-wrapper" deployed
release "demo-robot" deployed
release "demo-roles-wrapper" deployed
release "demo-sdc" deployed
release "demo-sdnc" deployed
release "demo-so" deployed
release "demo-uui" deployed
release "demo-vfc" deployed
release "demo-vid" deployed
release "demo-vnfsdk" deployed
6
ubuntu@onap-control-01:~/oom/kubernetes$ |
Verify the deploy:
Code Block |
---|
ubuntu@onap-control-01:~$ helm ls -n onap
NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION
demo onap 1 2021-07-13 15:14:35.025694014 +0000 UTC deployed onap-8.0.0 |
Code Block |
ubuntu@onap-control-1:~$ helm repo list NAME URL stable https://kubernetes-charts.storage.googleapis.com local http://127.0.0.1:8879Honolulu demo-a1policymanagement onap 1 ubuntu@onap-control-1:~$ |
Make onap helm charts available in local helm repository
Code Block |
---|
cd ~/oom/kubernetes
make all; make onap |
Note |
---|
Do not use sudo to perform the above 'make' operation |
This take somewhere around 10-15 minutes of time to make all the helm charts and save the charts into local helm repository
output:
Code Block |
---|
ubuntu@onap-control-1:~$ cd ~/oom/kubernetes/
ubuntu@onap-control-1:~/oom/kubernetes$ make all; make onap
[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'
[common]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting common
[INFO] Chart.yaml: icon is recommended
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/common-4.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
...
...
...
[onap]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ⎈Happy Helming!⎈
Saving 33 charts
Downloading aaf from repo http://127.0.0.1:8879
Downloading aai from repo http://127.0.0.1:8879
Downloading appc from repo http://127.0.0.1:8879
Downloading cassandra from repo http://127.0.0.1:8879
Downloading clamp from repo http://127.0.0.1:8879
Downloading cli from repo http://127.0.0.1:8879
Downloading common from repo http://127.0.0.1:8879
Downloading consul from repo http://127.0.0.1:8879
Downloading contrib from repo http://127.0.0.1:8879
Downloading dcaegen2 from repo http://127.0.0.1:8879
Downloading dmaap from repo http://127.0.0.1:8879
Downloading esr from repo http://127.0.0.1:8879
Downloading log from repo http://127.0.0.1:8879
Downloading sniro-emulator from repo http://127.0.0.1:8879
Downloading mariadb-galera from repo http://127.0.0.1:8879
Downloading msb from repo http://127.0.0.1:8879
Downloading multicloud from repo http://127.0.0.1:8879
Downloading nbi from repo http://127.0.0.1:8879
Downloading nfs-provisioner from repo http://127.0.0.1:8879
Downloading pnda from repo http://127.0.0.1:8879
Downloading policy from repo http://127.0.0.1:8879
Downloading pomba from repo http://127.0.0.1:8879
Downloading portal from repo http://127.0.0.1:8879
Downloading oof from repo http://127.0.0.1:8879
Downloading robot from repo http://127.0.0.1:8879
Downloading sdc from repo http://127.0.0.1:8879
Downloading sdnc from repo http://127.0.0.1:8879
Downloading so from repo http://127.0.0.1:8879
Downloading uui from repo http://127.0.0.1:8879
Downloading vfc from repo http://127.0.0.1:8879
Downloading vid from repo http://127.0.0.1:8879
Downloading vnfsdk from repo http://127.0.0.1:8879
Downloading modeling from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting onap
Lint OK
1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/onap-4.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
ubuntu@onap-control-1:~/oom/kubernetes$
|
Deploy ONAP
The name of the release as 'demo', the namespace as 'onap' and the timeout of 300 seconds to deploy 'dmaap' and 'so' which takes some time to deploy these charts waiting for other components.
Perform these below commands in onap-control-1 where git was cloned.
Code Block |
---|
helm deploy demo local/onap --namespace onap -f ~/overrides/onap-all.yaml -f ~/overrides/environment.yaml --timeout 900 |
Takes some 60-70 minutes due to added timeout parameter and environment file.
The environment file provides module wise delay required to process the deployment.
The output:
Code Block |
---|
ubuntu@onap-control-1:~/oom/kubernetes$ helm deploy demo local/onap --namespace onap -f ~/overrides/onap-all.yaml --timeout 900
fetching local/onap
release "demo" deployed
release "demo-aaf" deployed
release "demo-aai" deployed
release "demo-appc" deployed
release "demo-cassandra" deployed
release "demo-cds" deployed
release "demo-clamp" deployed
release "demo-cli" deployed
release "demo-consul" deployed
release "demo-contrib" deployed
release "demo-dcaegen2" deployed
release "demo-dmaap" deployed
release "demo-esr" deployed
release "demo-log" deployed
release "demo-mariadb-galera" deployed
release "demo-modeling" deployed
release "demo-msb" deployed
release "demo-multicloud" deployed
release "demo-nbi" deployed
release "demo-oof" deployed
release "demo-policy" deployed
release "demo-pomba" deployed
release "demo-portal" deployed
release "demo-robot" deployed
release "demo-sdc" deployed
release "demo-sdnc" deployed
release "demo-sniro-emulator" deployed
release "demo-so" deployed
release "demo-uui" deployed
release "demo-vfc" deployed
release "demo-vid" deployed
release "demo-vnfsdk" deployed
ubuntu@onap-control-1:~/oom/kubernetes$ |
Verify the deploy
Code Block |
---|
ubuntu@onap-control-1:~/overrides$ helm ls NAME2021-07-13 15:14:38.155669343 +0000 UTC deployed a1policymanagement-8.0.0 1.0.0 demo-aaf onap 1 2021-07-13 15:14:44.083961609 +0000 UTC deployed aaf-8.0.0 demo-aai onap 1 2021-07-13 15:15:43.238758595 +0000 UTC deployed aai-8.0.0 demo-cassandra onap 1 2021-07-13 15:16:32.632257395 +0000 UTC deployed cassandra-8.0.0 demo-cds onap 1 2021-07-13 15:16:42.884519209 +0000 UTC deployed cds-8.0.0 demo-cert-wrapper onap 1 2021-07-13 15:17:08.172161 +0000 UTC deployed cert-wrapper-8.0.0 demo-cli onap 1 2021-07-13 15:17:17.703468641 +0000 UTC deployed cli-8.0.0 demo-consul onap 1 2021-07-13 15:17:23.487068838 +0000 UTC deployed consul-8.0.0 demo-contrib onap 1 2021-07-13 15:17:37.10843864 +0000 UTC deployed contrib-8.0.0 demo-cps onap REVISION UPDATED 1 STATUS CHART 2021-07-13 15:18:04.024754433 +0000 UTC deployed APP VERSION NAMESPACE demo cps-8.0.0 demo-dcaegen2 onap 1 1 Fri Nov 29 16:26:16 2019 DEPLOYED onap-5.0.0 2021-07-13 15:18:21.92984273 +0000 ElUTC Alto deployed onap dcaegen2-8.0.0 demo-dcaegen2-aafservices onap 1 1 Fri Nov 29 16:26:17 2019 DEPLOYED aaf-5.0.0 2021-07-13 15:19:27.147459081 +0000 UTC deployed dcaegen2-services-8.0.0 onap Honolulu demo-aaidcaemod onap 1 Fri Nov 29 16:26:28 2019 DEPLOYED aai-5.0.0 1 2021-07-13 15:19:51.020335352 +0000 UTC deployed onap dcaemod-8.0.0 demo-appc dmaap 1 Fri Nov 29 16:27:30 2019 DEPLOYED appc-5.0.0onap 1 onap demo-cassandra 12021-07-13 15:20:23.115045736 +0000 UTC deployed Fri Nov 29 16:27:41 2019 DEPLOYED cassandra-5 dmaap-8.0.0 demo-esr onap demo-cds 1 1 Fri Nov 29 16:27:56 2019 DEPLOYED cds-5.0.0 2021-07-13 15:21:48.99450393 +0000 UTC deployed esr-8.0.0 demo-holmes onap demo-clamp onap 1 Fri Nov1 29 16:28:58 2019 DEPLOYED clamp-5.0.0 2021-07-13 15:21:55.637545972 +0000 UTC deployed onap holmes-8.0.0 demo-climariadb-galera onap 1 1 Fri Nov 29 16:29:31 2019 DEPLOYED cli-5.0.0 2021-07-13 15:22:26.899830789 +0000 UTC deployed onap mariadb-galera-8.0.0 demo-consul modeling 1 onap Fri Nov 29 16:29:45 2019 DEPLOYED consul-5.0.0 1 onap demo-contrib 12021-07-13 15:22:36.77062758 +0000 UTC deployed Fri Nov 29 16:30:04 2019 DEPLOYED contrib-5modeling-8.0.0 demo-msb onap onap demo-dcaegen2 1 Fri Nov 29 16:31:03 2019 DEPLOYED dcaegen2-5.0.0 2021-07-13 15:22:43.955119743 +0000 UTC deployed onap msb-8.0.0 demo-dmaapmulticloud 1onap Fri Nov 29 16:35:47 2019 DEPLOYED dmaap-5.0.0 1 2021-07-13 15:22:57.122972321 +0000 UTC deployed onap multicloud-8.0.0 demo-esrnbi 1 onap Fri Nov 29 16:50:24 2019 DEPLOYED esr-5.0.0 1 onap demo-log2021-07-13 15:23:10.724184832 +0000 UTC deployed nbi-8.0.0 demo-oof 1 Fri Nov 29 16:50:38 2019 DEPLOYED log-5.0.0 onap 1 onap demo2021-mariadb-galera 1 07-13 15:23:21.867288517 +0000 UTC deployed Fri Nov 29 16:51:08 2019 DEPLOYED mariadb-galera-5 oof-8.0.0 demo-policy onap onap demo-modeling 1 1 Fri Nov 29 16:51:29 2019 DEPLOYED modeling-5.0.0 2021-07-13 15:26:33.741229968 +0000 UTC deployed onap policy-8.0.0 demo-msbportal onap 1 Fri Nov 29 16:51:45 2019 DEPLOYED msb-5.0.0 1 2021-07-13 15:29:42.334773742 +0000 UTC deployed onap portal-8.0.0 demo-multicloud-repository-wrapper onap 1 1 Fri Nov 29 16:52:23 2019 DEPLOYED multicloud-5.0.0 2021-07-13 15:30:24.228522944 +0000 UTC deployed onap repository-wrapper-8.0.0 demo-nbirobot onap 1 Fri Nov 29 16:53:26 2019 DEPLOYED nbi-5.0.01 2021-07-13 15:30:36.103266739 +0000 UTC deployed onap robot-8.0.0 demo-roles-oofwrapper onap 1 Fri1 Nov 29 16:54:03 2019 DEPLOYED oof-5.0.0 2021-07-13 15:30:43.592035776 +0000 UTC deployed onap roles-wrapper-8.0.0 demo-sdc demo-policy 1 onap Fri Nov 29 16:56:27 2019 DEPLOYED policy-5.0.0 1 onap 2021-07-13 15:30:50.662463052 +0000 UTC demo-pombadeployed 1sdc-8.0.0 demo-so Fri Nov 29 16:59:13 2019 DEPLOYED pomba-5.0.0 onap 1 onap demo-portal 1 2021-07-13 15:34:44.911711191 +0000 UTC deployed Fri Nov 29 17:01:44 2019 DEPLOYED portal-5 so-8.0.0 demo-uui onap onap demo-robot 1 1 Fri Nov 29 17:03:10 2019 DEPLOYED robot-5.0.0 2021-07-13 15:55:27.84129364 +0000 UTC deployed uui-8.0.0 demo-vfc onap demo-sdc onap 1 Fri Nov 29 17:03:24 2019 DEPLOYED sdc-5.0.0 1 2021-07-13 15:55:32.516727818 +0000 UTC deployed onap vfc-8.0.0 demo-sdncvid 1 Fri Nov 29 17:05:27 2019 DEPLOYED sdnc-5.0.0onap 1 onap demo2021-sniro-emulator 1 07-13 15:56:02.048766897 +0000 UTC deployed Fri Nov 29 17:08:24 2019 DEPLOYED sniro-emulator-5 vid-8.0.0 demo-vnfsdk onap demo-so 1 1 Fri Nov 29 17:10:33 2019 DEPLOYED so-5.0.0 2021-07-13 15:56:19.960367033 +0000 UTC deployed onap demo-uui 1 Fri Nov 29 17:24:55 2019 DEPLOYED uui-5.0.0 vnfsdk-8.0.0 ubuntu@onap-control-01:~/oom/kubernetes$ |
In case of missing or failures in deployment.
If the deployment of any onap module fails, please go through these steps to redeploy the modules.
In this example, we demonstrate failure of dmaap, which normally occurs due to timeout issues.
Missing deployment
In the above deployment, demo-sdnc is missing. So we reinstall this.
Code Block |
---|
ubuntu@onap-control-01:~/oom/kubernetes$ helm install --namespace onap demo-sdnc local/sdnc --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/onap-all.yaml --timeout 1200s
NAME: demo-sdnc
LAST DEPLOYED: Tue Jul 13 16:11:58 2021
NAMESPACE: onap
STATUS: deployed
REVISION: 1
TEST SUITE: None
ubuntu@onap-control-01:~/oom/kubernetes$ |
Check the failed modules
perform 'helm ls' on the control node.
Code Block |
---|
ubuntu@onap-control-01:~$ helm ls -n onap NAME onap NAMESPACE REVISION UPDATED demo-vfc 1 Fri Nov 29 17:24:59 2019 DEPLOYED vfc-5.0.0 STATUS onap demo-vid CHART 1 Fri Nov 29 17:26:05 2019 DEPLOYED vid-5.0.0 APP VERSION demo onap demo-vnfsdk 1 Fri Nov 29 17:26:38 2019 DEPLOYED vnfsdk-52021-07-13 15:14:35.025694014 +0000 UTC deployed onap-8.0.0 Honolulu demo-a1policymanagement onap onap1 ubuntu@onap 2021-control-1:~/oom/kubernetes$ |
In case of failures in deployment
If the deployment of any onap module fails, please go through these steps to redeploy the modules.
In this example, we demonstrate failure of dmaap, which normally occurs due to timeout issues.
Check the failed modules
perform 'helm ls' on the control node.
Code Block |
---|
ubuntu@onap-control-1:~/overrides$ helm ls NAME07-13 15:14:38.155669343 +0000 UTC deployed a1policymanagement-8.0.0 1.0.0 demo-aaf REVISION UPDATEDonap 1 2021-07-13 15:14:44.083961609 +0000 UTC deployed aaf-8.0.0 STATUS CHART APP VERSION NAMESPACE demo-aai onap 1 Fri Nov 29 16:26:16 2019 DEPLOYED onap-52021-07-13 15:15:43.238758595 +0000 UTC deployed aai-8.0.0 El Alto onap demo-aafcassandra onap 1 Fri Nov 29 16:26:17 2019 DEPLOYED aaf-52021-07-13 15:16:32.632257395 +0000 UTC deployed cassandra-8.0.0 demo-cds onap demo-aai onap 1 Fri Nov 29 16:26:28 2019 DEPLOYED aai-52021-07-13 15:16:42.884519209 +0000 UTC deployed cds-8.0.0 onap demo-cert-appcwrapper onap 1 Fri Nov 29 16:27:30 2019 DEPLOYED appc-52021-07-13 15:17:08.172161 +0000 UTC deployed cert-wrapper-8.0.0 demo-cli onap demo-cassandra onap 1 Fri Nov 29 16:27:41 2019 DEPLOYED cassandra-52021-07-13 15:17:17.703468641 +0000 UTC deployed cli-8.0.0 onap demo-cdsconsul onap 1 Fri Nov 29 16:27:56 2019 DEPLOYED cds-52021-07-13 15:17:23.487068838 +0000 UTC deployed consul-8.0.0 demo-contrib onap demo-clamp onap 1 Fri Nov 29 16:28:58 2019 DEPLOYED clamp-52021-07-13 15:17:37.10843864 +0000 UTC deployed contrib-8.0.0 demo-cps onap demo-cli onap 1 Fri Nov 29 16:29:31 2019 DEPLOYED cli-52021-07-13 15:18:04.024754433 +0000 UTC deployed cps-8.0.0 onap demo-consuldcaegen2 onap 1 Fri Nov 29 16:29:45 2019 DEPLOYED consul-52021-07-13 15:18:21.92984273 +0000 UTC deployed dcaegen2-8.0.0 onap demo-dcaegen2-contribservices onap 1 Fri Nov 29 16:30:04 2019 DEPLOYED contrib-52021-07-13 15:19:27.147459081 +0000 UTC deployed dcaegen2-services-8.0.0 Honolulu demo-dcaemod onap demo-dcaegen2 1 Fri Nov 29 16:31:03 2019 DEPLOYED dcaegen2-5 2021-07-13 15:19:51.020335352 +0000 UTC deployed dcaemod-8.0.0 onap demo-dmaap 1onap 1 Mon Dec 2 05:45:05 2019 FAILED 2021-07-13 15:20:23.115045736 +0000 UTC deployed dmaap-58.0.0 onap demo-esr onap 1 Fri Nov 29 16:50:24 2019 DEPLOYED esr-52021-07-13 15:21:48.99450393 +0000 UTC deployed esr-8.0.0 onap demo-logholmes onap 1 Fri Nov 29 16:50:38 2019 DEPLOYED log-52021-07-13 15:21:55.637545972 +0000 UTC deployed holmes-8.0.0 demo-mariadb-galera onap demo-mariadb-galera 1 Fri Nov 29 16:51:08 2019 DEPLOYED2021-07-13 15:22:26.899830789 +0000 UTC deployed mariadb-galera-58.0.0 onap demo-modeling onap 1 Fri Nov 29 16:51:29 2019 DEPLOYED modeling-52021-07-13 15:22:36.77062758 +0000 UTC deployed modeling-8.0.0 onap demo-msb onap 1 Fri Nov 29 16:51:45 2019 DEPLOYED msb-52021-07-13 15:22:43.955119743 +0000 UTC deployed msb-8.0.0 onap demo-multicloud onap 1 Fri Nov 29 16:52:23 2019 DEPLOYED multicloud-52021-07-13 15:22:57.122972321 +0000 UTC deployed multicloud-8.0.0 onap demo-nbi onap 1 Fri Nov 29 16:53:26 2019 DEPLOYED nbi-52021-07-13 15:23:10.724184832 +0000 UTC deployed nbi-8.0.0 onap demo-oof 1onap 1 Mon Dec 2 2021-07:04:11 2019 DEPLOYED-13 15:23:21.867288517 +0000 UTC deployed oof-58.0.0 onap demo-policy onap 1 Fri Nov 29 16:56:27 2019 DEPLOYED policy-52021-07-13 15:26:33.741229968 +0000 UTC deployed policy-8.0.0 onap demo-pombaportal onap 1 Fri Nov 29 16:59:13 2019 DEPLOYED pomba-52021-07-13 15:29:42.334773742 +0000 UTC deployed portal-8.0.0 onap demo-portalrepository-wrapper onap 1 Fri Nov 29 17:01:44 2019 DEPLOYED portal-52021-07-13 15:30:24.228522944 +0000 UTC deployed repository-wrapper-8.0.0 demo-robot onap demo-robot onap 1 Fri Nov 29 17:03:10 2019 DEPLOYED robot-52021-07-13 15:30:36.103266739 +0000 UTC deployed robot-8.0.0 onap demo-roles-sdcwrapper onap 1 Fri Nov 29 17:03:24 2019 DEPLOYED sdc-52021-07-13 15:30:43.592035776 +0000 UTC deployed roles-wrapper-8.0.0 demo-sdc onap 1 demo-sdnc 2021-07-13 15:30:50.662463052 +0000 UTC deployed sdc-8.0.0 1 Fri Nov 29 17:05:27 2019 DEPLOYED sdnc-5.0.0 demo-sdnc onap demo-sniro-emulator 1 Fri Nov 29 17:08:24 2019 DEPLOYED sniro-emulator-52021-07-13 16:11:58.795467333 +0000 UTC deployed sdnc-8.0.0 onap demo-so 1 onap 1 Mon Dec 2 08:58:33 2019 DEPLOYED 2021-07-13 15:34:44.911711191 +0000 UTC deployed so-58.0.0 demo-uui onap demo-uui onap 1 Fri Nov 29 17:24:55 2019 DEPLOYED uui-52021-07-13 15:55:27.84129364 +0000 UTC deployed uui-8.0.0 onap demo-vfc onap 1 Fri Nov 29 17:24:59 2019 DEPLOYED vfc-52021-07-13 15:55:32.516727818 +0000 UTC deployed vfc-8.0.0 onap demo-vid onap 1 Fri Nov 29 17:26:05 2019 DEPLOYED vid-52021-07-13 15:56:02.048766897 +0000 UTC deployed vid-8.0.0 onap demo-vnfsdk onap 1 Fri Nov 29 17:26:38 2019 DEPLOYED vnfsdk-5.0.0 onap2021-07-13 15:56:19.960367033 +0000 UTC deployed vnfsdk-8.0.0 |
Delete the failed module
use the right release name from the name as shown in helm ls.
...
Code Block |
---|
helm delete demo-dmaap --purge
kubectl get persistentvolumeclaims -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash
kubectl get persistentvolumes -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash
kubectl get secrets -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete secrets -n onap \1/' | bash
kubectl get clusterrolebindings -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings -n onap \1/' | bash
kubectl get jobs -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete jobs -n onap \1/' | bash
kubectl get pods -n onap | grep demo-dmaap | sed -r 's/(^[^ ]+).*/kubectl delete pods -n onap \1/' | bash
|
...
Code Block |
---|
cd /dockerdata-nfs/ sudo rm -r demo-dmaap/ |
Reinstall module
Reinstall the deleted module with the same release name as used in the deletion
Code Block |
---|
helm install --namespace onap -n demo-dmaap local/dmaap --set global.masterPassword=WinLab_NetworkSlicing -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/onap-all.yaml --timeout 9001200s |
You can verify the deployment in a parallel terminal by checking the pods using the command
...
Once this is deployed, you can verify using the "helm ls" command to check all the required modules are up and running.
Undeploy ONAP
For the release name 'demo' and namespace 'onap':
...
Code Block |
---|
helm undeploy demo --purge
kubectl get persistentvolumeclaims -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash
kubectl get persistentvolumes -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash
kubectl get secrets -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete secrets -n onap \1/' | bash
kubectl get clusterrolebindings -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings -n onap \1/' | bash
kubectl get jobs -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete jobs -n onap \1/' | bash
kubectl get pods -n onap | grep demo | sed -r 's/(^[^ ]+).*/kubectl delete pods -n onap \1/' | bash
|
...
Code Block |
---|
cd /dockerdata-nfs/ sudo rm -r * e.g. ubuntu@onap-nfs-server:~$ cd /dockerdata-nfs/ ubuntu@onap-nfs-server:/dockerdata-nfs$ sudo rm -r * |
Access SDN-R
ODLUX-GUI at winlab
The {userusername} should be replaced by your user id created in orbit-lab.your user id created in orbit-lab.
Code Block |
---|
SSH from your machine to create tunnels with given ports on console.sb10.orbit.org:
hanif@ubuntu:~$ ssh -L 30267:localhost:30267 -L 30205:localhost:30205 {usename |
Code Block |
ssh -A -t {user}@console.sb10.orbit-lab.org SSH from console.sb10.orbit.org to create tunnels with given ports on node1-4.sb10.orbit.org: hanif@console:~$ ssh -L 3193930267:localhost:31939 ssh -A -t native@node1-1.sb10.orbit-lab.org30267 -L 30205:localhost:30205 native@node1-4 SSH from node1-4.sb10.orbit.org to create tunnels with given ports on onap-control-01: native@node1-4:~$ ssh -L 3193930267:localhost:3193930267 ssh -A -tL 30205:localhost:30205 ubuntu@10.31.3.2 -L 31939:localhost:31939 4.11 |
On your browser:
Code Block |
---|
http://localhost:3193930267/odlux/index.html |
The login credentials are:
...
password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
ODLUX-GUI at your labs
Check the IP on the sdnc service bound to port 8282:
Code Block |
---|
ubuntu@onap-control-101:~$ kubectl get service -n onap | grep sdnc pomba-sdncctxbuildersdnc NodePort ClusterIP 10.43.145101.187189 <none> 95308443:30267/TCP 2d21h sdnc-ansible-server ClusterIP 10.43.46.219 2d18h sdnc <none> NodePort 8000/TCP 10.43.103.106 <none> 8282:31939/TCP,8202:31510/TCP,8280:30246/TCP,8443:30267/TCP 7m52s2d21h sdnc-ansible-servercallhome NodePort ClusterIP 10.43.113139.22627 <none> 80006666:30266/TCP 7m52s2d21h sdnc-cluster ClusterIP None <none> 2550/TCP 7m52s2d21h sdnc-dgbuilder NodePort 10.43.6224.5071 <none> 3000:30203/TCP 7m52s2d21h sdnc-dmaap-listener ClusterIP None <none> <none> 7m52s2d21h sdnc-portaloam NodePort ClusterIP 10.43.116227.73 206 <none> 8443:302018282/TCP,8202/TCP 7m52s2d21h sdnc-ueb-listener ClusterIP None <none> <none> 7m52s so-sdnc-adapter 2d21h sdnc-web-service ClusterIP 10.43.27.8 <none>NodePort 10.43.211.74 <none> 8086/TCP 8443:30205/TCP 142m2d21h vfc-zteso-sdnc-driveradapter ClusterIP 10.43.18920.17058 <none> 84118086/TCP 2d17h |
Look for sdnc service only and the port bound to 8282.
In the above result it is 31939.
Code Block |
---|
http://{ip-address}:{sdnc-port-bound-to-8282}/odlux/index.html |
...
2d21h |
Troubleshooting
Documentation for troubleshooting.
ES-DB index read only – NFS out of disc space
ONAP log (elastic DB) consumes approx 1 GB per day. If disc space crosses a threshold, indindices of SDNC elastic DB are set to read-only.
...
Code Block | ||
---|---|---|
| ||
PUT _settings { "index": { "blocks": { "read_only_allow_delete": "false" } } } |
helm repo add local http://127.0.0.1:8080