- Created by Marian Darula, last modified by Zu Qiang (Ericsson) on Dec 06, 2021
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 8 Next »
tosca.datatype.onap.extCpdData Expand source
data_types: extCpdData: version: 1.0 description: "Describes the datatype for external connection point definition data" properties: id: description: "The identifier of this extCpdData" required: true type: string virtualLinkRequirement: description: > Refers in an abstract way to the network or multiple networks that the ExtCpd shall be exposed on (ex: OAM, EndUser, backhaul, LI, etc) required: true type: string networkInterfaceRequirements: description: > Details container implementation specific requirements on the NetworkAttachmentDefinition required: false type: datatype.networkInterfaceRequirements inputParamMappings: description: > Information on what helm chart input parameters that are required to be configured for this extCpd required: false type: datatype.paramMappings resourceMapping: description: > Kubernetes API resource name for the resource manifest for the service required: false type: string
tosca.datatype.onap.networkInterfaceRequirements Expand source
data_types: networkInterfaceRequirements: version: 1.0 description: "Describes the datatype for network interface requirements" properties: trunkMode: description: > Information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other). When operating in "trunk mode", the Cp is capable of carrying traffic for several VLANs. Absence of this property implies that trunkMode is not configured for the Cp i.e. It is equivalent to boolean value "false". required: false type: boolean ipam: description: > The default value ("infraProvided") means that the CNI specifies how IPAM is done and assigns the IP address to the pod interface. required: false type: string constraints: - valid_values: ["infraProvided", "orchestrated", "userManaged"] interfaceType: description: > This attribute is applicable for passthrough and memif interfaces. The default value is ”kernel.netdev”. required: false type: string constraints: - valid_values: ["kernel.netdev", "direct.userdriver", "direct.kerneldriver", "direct.bond", "userspace"] interfaceOption: description: > This attribute is applicable for passthrough and memif interfaces. The default value is ”kernel.netdev”. required: false type: list entry_schema: type: string constraints: - valid_values: [“virtio", "memif“] interfaceRedundancy: description: > Default value is "infra-provided”, which means that the infrastructure is expected to provide network redundancy for the pod interface. Value "none" means that the application has no requirement on network redundancy. Value ”matedPair” means that the Pod asks for a mated pair of non-redundant left/right network attachments (typically SRIOV) and handles redundancy on application level. The same set of networks shall be configured on both interfaces. required: false type: string constraints: - valid_values: ["infraProvided", "actPassBond", "actActBond", "actPassL3", "actActL3", "Left", "Right"] nicOptions: description: > nics a direct user space driver the application is verified to work with. Allowed values from ETSI registry. required: false type: list entry_schema: type: string
tosca.datatype.onap.paramMappings Expand source
data_types: paramMappings: version: 1.0 description: "Describes the datatype for parameter mapping" properties: ipAddressParameter: description: > When present, this attribute specifies the name of the deployment artifact input parameter through which the orchestrator can configure the IP address(es), ipv4 and/or IPv6, for this asdExtCpd. The param name and provided IP address value will be passed to the deployment tool when deploying the DeploymentArtifacts. required: false type: string nadName: description: > These attributes specifies, for an asdExtCpd respesenting a secondary network interface, the name(s) of the deployment artifact input parameters through which the orchestrator can configure the corresponding network annotation in the pod manifest with references to the NAD(s) to be used for creating the network interface.It is expected that the NADs themselves have been created prior to the deployment of the deployment artifacts. required: false type: string nadNamespace: description: > These attributes specifies, for an asdExtCpd respesenting a secondary network interface, the name(s) of the deployment artifact input parameters through which the orchestrator can configure the corresponding network annotation in the pod manifest with references to the NAD(s) to be used for creating the network interface.It is expected that the NADs themselves have been created prior to the deployment of the deployment artifacts. required: false type: string
tosca.datatype.onap.enhancedClusterCapabilities Expand source
data_types: enhancedClusterCapabilities: version: 1.0 description: "Describes the datatype for parameter mapping" properties: id: description: "Asd local unique name for the enhanceClusterCapabilities instance" required: true type: string minKernelVersion: description: "Describes the minimal required Kernel version, e.g. 4.15.0. Coded as displayed by linux command uname –r" required: true type: string requiredKernelModules: description: > Required kernel modules are coded as listed by linux lsmod command, e.g. ip6_tables, cryptd, nf_nat etc. required: false type: list entry_schema: type: string conflictingKernelModules: description: > Kernel modules, which must not be present in the target environment. The kernel modules are coded as listed by linux lsmod command, e.g. ip6_tables, cryptd, nf_nat etc. Example: Linux kernel SCTP module, which would conflict with use of proprietary user space SCTP stack provided by the application. required: false type: list entry_schema: type: string requiredCustomResources: description: > List the required CRDs and their versions in the target environment. The list shall include those CRDs which are not delivered with the application. required: false type: list entry_schema: type: map entry_schema: description: kind: "Redis", apiVersion: "kubedb.com/v1alpha1" type: string clusterLabels: description: > This attribute allows to associate arbitrary labels to clusters. These can indicate special infrastructure capabilities (e.g., NW acceleration, GPGPU compute, etc.). The intent of these labels is to serve as a set of values that can help in application placement decisions. This can be specified with the attribute -m: Mandatory, means deployment is not attempted if such support is not available in the target system -p: As preference - it means orchestrator will try to select a system with specific requirements, but if not found it will attempt deployment in a system not having such HW. required: false type: list entry_schema: type: string requiredPodAnnotations: description: > Annotations required to be supported. Example that list requirement for Kubernetes cluster infrastructure support for the Multus network attachment annotations: requiredPodAnnotations: {"k8s.v1.cncf.io/networks", ... } required: false type: list entry_schema: type: string
- No labels