Overview
For ONAP SDN-R load and stress test and Proof of concept, June 19 a three node SDN-R cluster is used. Version is El Alto.
Precondition
- Running performant physical server cluster (The hardware requirements)
- Openstack installed
- VM cloud image ubuntu 18.04-server-image
Goal of this description is to setup a partial ONAP with focus of SDN-R services
Steps
- Installing Kubernetes and Rancher
- Initiation HELM
- Downloading OOM charts
- Installation of SDN-R, LOG, AAI, SO, PORTAL, ROBOT Framework, OOF
- Installartion of Device Simulators
Installing Kubernetes and Rancher (Step 1)
Create the Rancher 3 nodes control cluster named as onap-control on OpenStack
The following instructions describe how to create 3 OpenStack VMs to host the Highly-Available Kubernetes Control Plane. ONAP workloads will not be scheduled on these Control Plane nodes.
Launch new VMs in OpenStack.
Select Ubuntu 18.04 as the boot image for the VM without any volume
Select m1.large flavor
Apply customization script for Control Plane VMs
The script to be copied:
!/bin/bash DOCKER_VERSION=18.09.5 sudo apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh mkdir -p /etc/systemd/system/docker.service.d/ cat > /etc/systemd/system/docker.service.d/docker.conf << EOF [Service] ExecStart= ExecStart=/usr/bin/dockerd -H fd:// --insecure-registry=nexus3.onap.org:10001 EOF sudo usermod -aG docker ubuntu systemctl daemon-reload systemctl restart docker apt-mark hold docker-ce IP_ADDR=ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}' HOSTNAME=hostname echo "$IP_ADDR $HOSTNAME" >> /etc/hosts docker login -u docker -p docker nexus3.onap.org:10001 sudo apt-get install make -y wget https://storage.googleapis.com/kubernetes-release/release/v1.13.5/bin/linux/amd64/kubectl chmod +x kubectl sudo mv ./kubectl /usr/local/bin/kubectl wget http://storage.googleapis.com/kubernetes-helm/helm-v2.12.3-linux-amd64.tar.gz tar -zxvf helm-v2.12.3-linux-amd64.tar.gz sudo mv linux-amd64/helm /usr/local/bin/helm sudo apt-get update sudo apt-get upgrade -y exit 0
This customization script will:
- update ubuntu
- install docker
- install make
- download and install kubectl
- download and install helm
- once again update & upgrade ubuntu
Launched Instances
Create the Kubernetes 12 nodes worker cluster named as onap-k8s on OpenStack cloud
The following instructions describe how to create OpenStack VMs to host the Highly-Available Kubernetes Workers. ONAP workloads will only be scheduled on these nodes.
Launch new VM instances in OpenStack
Select Ubuntu 18.04 as base image
Select Flavor
The size of Kubernetes hosts depend on the size of the ONAP deployment being installed.
If a small subset of ONAP applications are being deployed (i.e. for testing purposes), then 16GB or 32GB may be sufficient.
Networking
Apply customization script for Kubernetes VM(s)
The scrip to be copied:
!/bin/bash DOCKER_VERSION=18.09.5 sudo apt-get update curl https://releases.rancher.com/install-docker/$DOCKER_VERSION.sh | sh mkdir -p /etc/systemd/system/docker.service.d/ cat > /etc/systemd/system/docker.service.d/docker.conf << EOF [Service] ExecStart= ExecStart=/usr/bin/dockerd -H fd:// --insecure-registry=nexus3.onap.org:10001 EOF sudo usermod -aG docker ubuntu systemctl daemon-reload systemctl restart docker apt-mark hold docker-ce IP_ADDR=ip address |grep ens|grep inet|awk '{print $2}'| awk -F / '{print $1}' HOSTNAME=hostname echo "$IP_ADDR $HOSTNAME" >> /etc/hosts docker login -u docker -p docker nexus3.onap.org:10001 sudo apt-get install make -y wget https://storage.googleapis.com/kubernetes-release/release/v1.13.5/bin/linux/amd64/kubectl chmod +x kubectl sudo mv ./kubectl /usr/local/bin/kubectl sudo apt-get update sudo apt-get upgrade -y exit 0
This customization script will:
- update ubuntu
- install docker
- install nfs common
- download and install kubectl
- update and upgrade ubuntu
Launched k8s instances
Configure Rancher Kubernetes Engine
Install RKE
Download and install RKE on a VM, desktop or laptop. Binaries can be found here for Linux and Mac: https://github.com/rancher/rke/releases/tag/v0.2.1
Perform this on linux based personal laptop, local machine or a VM which has the connectivity to the created VMs on OpenStack and whose key has been configured during creation of VMs.
In our setup, the key of OpenStack controller has been used to login into VMs, so these steps have been performed on OpenStack controller.
mkdir rke cd rke/ wget https://github.com/rancher/rke/releases/download/v0.2.1/rke_linux-amd64 mv rke_linux-amd64 rke chmod -x rke
RKE requires a cluster.yml as input. An example file is show below that describes a Kubernetes cluster that will be mapped onto the OpenStack VMs created earlier in this guide.
Example: cluster.yml
The example file:
# An example of an HA Kubernetes cluster for ONAP nodes: - address: 10.31.3.2 port: "22" role: - controlplane - etcd hostname_override: "onap-control-1" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.3 port: "22" role: - controlplane - etcd hostname_override: "onap-control-2" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.16 port: "22" role: - controlplane - etcd hostname_override: "onap-control-3" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.15 port: "22" role: - worker hostname_override: "onap-k8s-1" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.9 port: "22" role: - worker hostname_override: "onap-k8s-2" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.29 port: "22" role: - worker hostname_override: "onap-k8s-3" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.8 port: "22" role: - worker hostname_override: "onap-k8s-4" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.5 port: "22" role: - worker hostname_override: "onap-k8s-5" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.23 port: "22" role: - worker hostname_override: "onap-k8s-6" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.1 port: "22" role: - worker hostname_override: "onap-k8s-7" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.24 port: "22" role: - worker hostname_override: "onap-k8s-8" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.11 port: "22" role: - worker hostname_override: "onap-k8s-9" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.35 port: "22" role: - worker hostname_override: "onap-k8s-10" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.13 port: "22" role: - worker hostname_override: "onap-k8s-11" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" - address: 10.31.3.10 port: "22" role: - worker hostname_override: "onap-k8s-12" user: ubuntu ssh_key_path: "~/.ssh/id_rsa" services: kube-api: service_cluster_ip_range: 10.43.0.0/16 pod_security_policy: false always_pull_images: false kube-controller: cluster_cidr: 10.42.0.0/16 service_cluster_ip_range: 10.43.0.0/16 kubelet: cluster_domain: cluster.local cluster_dns_server: 10.43.0.10 fail_swap_on: false network: plugin: canal authentication: strategy: x509 ssh_key_path: "~/.ssh/id_rsa" ssh_agent_auth: false authorization: mode: rbac ignore_docker_version: false kubernetes_version: "v1.13.5-rancher1-2" private_registries: - url: nexus3.onap.org:10001 user: docker password: docker is_default: true cluster_name: "onap" restore: restore: false snapshot_name: ""