CCVPN Close Loop

CCVPN Closed Loop Diagram

SDC/CLAMP Portal design and activate policy.
SDC/CLAMP config and activate the policy.
SDC/CLAMP distribute the DCAE config.
SDC/CLMAP distribute the alarm correlation rules to Holmes.
3rd party SOTN controller report link down alarm to DCAE
DCAE will do data cleaning and filtering for the alarms
DCAEk keep track the datas.
Holmes do analysis for the alarms.
Holmes notify the reroute event.
Policy matching the reroute rules.
Policy call SO to delete the old services and create the new services. For the creation flow, a variable route will be recalculated.

CLAMP

Currently collector’s are not deployed on-demand, they are pre-deployed in DCAE and used by all the mS and all control loops. So the

collector’s, currently, are not deployed via CLAMP and there is no cloudify blueprint available to do so anyway. The collector box in CLAMP

GUI is just a virtual box to show the control loop flow, in reality there is no configuration made by CLAMP for the collector (at least at this

stage of ONAP, it might change in the future).

This raises the following requirements driven by CCVPN use case towards to design of control loop/CLAMP to accomplish micro-service

deployed on demand at CL instantiation.

Collector on demand per control loop instance
Or, common APIs of collector for updating collector at run time per control loop instantiation
One instance of Holmes engine per control loop
Configurable policy/actor/recipe mapping at PK

DCAE

DCAE Diagram

The APIs between SOTN Controller and the alarm notification collector following IETF-RESTCONF/YANG-PUSH notification standard:

RestConf Collector (RC)subscribes for remote failure alarm to SOTN Controller (SC)
RC requests to set up a persistent connection with the 3rd party SC.
As the connection is standing, SC pushes service route status data to the collector
RC receives alarm data, converts it into JSON format and publishes on DMAAP with topic of ROUTE_ALARM_OUTPUT
UVA consumes the alarm message
UVA requests the RestConf2VES mapping from the mapper. As of CCVPN use case proposal, the RestConf2VES.xml is manually uploaded to the mapper.
Mapper response back the mapping
UVA converts json alarm into VES event
UVA publishes the VES event on DMAAP for further correlation

APIs to SOTN Controller (Restconf)

Subscribe Notification

Functionality

Collector (Client) and SOTN Controller establishes subscription relationship.

Method

POST

Request-URL

/restconf/operations/ietf-subscribed-notifications:establish-subscription

Request-Body

{

"ietf-subscribed-notifications:input": {

"encoding": "encode-json"

}

Response-Body

{

"ietf-subscribed-notifications:output": {

"identifier": "1"

}

Establish Long Term Connectivity

Functionality

Collector establishes long term connectivity with SOTN Controller and the controller will continuously Push the subscribed notification over.

Method

GET

Request-URL

/restconf/streams/yang-push-json

Request-Body

Response-Body

{

"ietf-notification:notification": {

"eventTime": {eventTime},

"ietf-yang-push: push-change-update ": {

"subscription-id ": {subscription-id },

" datastore-changes ": {

"ietf-yang-patch:yang-patch": {

"patch-id": {patch-id},

"edit": [

{

"edit-id" : {edit-id },

"operation" : {operation },

"target" : {target },

"value": {value}

}

]

}

Restconf Notification

This is the Route/LinkId sttatus notification example from SOTN Controller.

Service Down Alarm

  
  "ietf-restconf:notification": {
    "eventTime": "2018-07-28T09:15:03.924Z",
    "ietf-yang-push:push-change-update": {
      "subscription-id": 1,
      "datastore-changes": {
        "ietf-yang-patch:yang-patch": {
          "patch-id": "d1d08ce8-b24d-4efb-a0e7-7b835642f2f1",
          "edit": [
            {
              "edit-id": "0",
              "operation": "merge",
              "target": "/network=providerId%2F5555%2FclientId%2F6666%2FtopologyId%2F11/node=example-node/ietf-network-topology:termination-point=14",
              "value": {
                "ietf-network-topology:termination-point": [
                  {
                    "supporting-termination-point": [
                      {
                        "network-ref": "providerId/5555/clientId/6666/topologyId/33",
                        "node-ref": "node-ref-example",
                        "tp-ref": "33488898"
                      }
                    ],
                    "ietf-eth-te-topology:svc": {
                      "client-facing": "true",
                      "supported-classification": {
                        "transparent": "true"
                      }
                    },
                    "ietf-te-topology:te": {
                      "admin-status": "up",
                      "interface-switching-capability": [
                        {
                          "encoding": "lsp-encoding-ethernet",
                          "max-lsp-bandwidth": [
                            {
                              "priority": "7",
                              "te-bandwidth": {
                                "ietf-eth-te-topology:eth-bandwidth": "1000000"
                              }
                            }
                          ],
                          "switching-capability": "switching-l2sc"
                        }
                      ],
                      "oper-status": "up",
                      "inter-domain-plug-id": "51000"
                    },
                    "ietf-te-topology:te-tp-id": "1",
                    "tp-id": "1"
                  }
                ]
              }
            }
          ]
        }
      }
    }
  }

Route Alarm Message

This is the message definition at output of Restconf collector to DMAAP with topic of RESTCONF_ALARM_TOPIC.

Restconf Collector Output (JSON)

{
  "notify_oid" : "example-mappingfile-id.x.1",
  
  "ietf-restconf:notification": {
    "eventTime": "2018-07-28T09:15:03.924Z",
    "ietf-yang-push:push-change-update": {
      "subscription-id": 1,
      "datastore-changes": {
        "ietf-yang-patch:yang-patch": {
          "patch-id": "d1d08ce8-b24d-4efb-a0e7-7b835642f2f1",
          "edit": [
            {
              "edit-id": "0",
              "operation": "merge",
              "target": "/network=providerId%2F5555%2FclientId%2F6666%2FtopologyId%2F11/node=example-node/ietf-network-topology:termination-point=14",
              "value": {
                "ietf-network-topology:termination-point": [
                  {
                    "supporting-termination-point": [
                      {
                        "network-ref": "providerId/5555/clientId/6666/topologyId/33",
                        "node-ref": "node-ref-example",
                        "tp-ref": "33488898"
                      }
                    ],
                    "ietf-eth-te-topology:svc": {
                      "client-facing": "true",
                      "supported-classification": {
                        "transparent": "true"
                      }
                    },
                    "ietf-te-topology:te": {
                      "admin-status": "up",
                      "interface-switching-capability": [
                        {
                          "encoding": "lsp-encoding-ethernet",
                          "max-lsp-bandwidth": [
                            {
                              "priority": "7",
                              "te-bandwidth": {
                                "ietf-eth-te-topology:eth-bandwidth": "1000000"
                              }
                            }
                          ],
                          "switching-capability": "switching-l2sc"
                        }
                      ],
                      "oper-status": "up",
                      "inter-domain-plug-id": "51000"
                    },
                    "ietf-te-topology:te-tp-id": "1",
                    "tp-id": "1"
                  }
                ]
              }
            }
          ]
        }
      }
    }
  }
}

VES MAPPER

The Restconf2VES.xml could be uploaded to DCAE at the closed loop deployment from DCAE Designer. For now, it will be manually uploaded to the mapper at the closed loop instantiation.

Mapping XML

Restconf2VES.xml

UVA subscribes RESTCONF_ALARM_TOPIC on DMAAP.

Route Down Alarm

Route Down Alarm (VES/CEDM)

{
    "event": {
        "commonEventHeader": {
            "sourceId": example-linkeid", // 'target' from the restconf notification.
            "startEpochMicrosec": 1413378172000000,
            "eventId": "ab305d54-85b4-a31b-7db2-fb6b977766",
            "sequence": 0,
            "domain": "fault",
            "lastEpochMicrosec": 1413378172000033,
            "eventName": "Fault_Route_Failure",
            "sourceName": "example-linkid", // 'Target' from the restconf notification.
            "priority": "High",
            "version": 3.0,
            "reportingEntityName": "Domain_Contorller"
        },
        "faultFields": {
            "eventSeverity": "CRITICAL",
            "alarmCondition": "Route_Down",
            "faultFieldsVersion": 2.0,
            "specificProblem": "Fault_SOTN_Service_Failure",
            "alarmAdditionalInformation": [{
                    "name": "inter-domain-id",                      
                    "value": "service-instance-01"
                },
                {
                "name": "linkId",                     
                "value": "example-linkId"
                },
                {
                "name": "nodeId",                      
                "value": "example-linkId"
                },
                {
                "name": "topologyId",                    
                "value": "example-topologyId"
                }
            ]
            "eventSourceType": "other",
            "vfStatus": "Active"
        }
    }
}

These alarms are published to the unauthenticated.SEC_FAULT_OUTPUT topic of DMaaP.

DCAE Blueprints

Blueprint for Restconf Collector

Restconf.yaml.template

Blueprint for Holmes Rule Manager

Holmes-rules.yaml.template

HOLMES (WIP)

CCVPN Close Loop requires Holmes to correlate route down alarms from SOTN Controllers from different sites. (Refer to this page on Holmes installation,)

In Phase 1, for the minimum, two of the above defined Route_Down_Alarm will be correlated within time window of 15 - 30, for instance, milliseconds. (Refer to this page as examples.)

Rule Creation

Holmes Rule

{
 
"ruleName": "CCVPN",
 
"loopControlName": "ControlLoop-CCVPN-2179b738-fd36-4843-a71a-a8c24c70c55b",
 
"description": "This rule is designed for the correlation analysis for the CCVPN use case.",
 
"content": "package org.onap.holmes.droolsRule;\n\nimport org.onap.holmes.common.dmaap.DmaapService;\nimport org.onap.holmes.common.api.stat.VesAlarm;\nimport org.onap.holmes.common.aai.CorrelationUtil;\nimport org.onap.holmes.common.dmaap.entity.PolicyMsg;\nimport org.onap.holmes.common.dropwizard.ioc.utils.ServiceLocatorHolder;\nimport org.onap.holmes.common.utils.DroolsLog;\n \n\nrule \"Relation_analysis_Rule\"\nsalience 200\nno-loop true\n    when\n        $root : VesAlarm(alarmIsCleared == 0,\n            $sourceId: sourceId, sourceId != null && !sourceId.equals(\"\"),\n\t\t\t$sourceName: sourceName, sourceName != null && !sourceName.equals(\"\"),\n\t\t\t$startEpochMicrosec: startEpochMicrosec,\n            specificProblem in (\"Fault_SOTN_Service_Failure\"),\n            $eventId: eventId)\n        $child : VesAlarm( eventId != $eventId, parentId == null,\n            specificProblem in (\"Fault_SOTN_Service_Failure\"),\n            startEpochMicrosec < $startEpochMicrosec + 60000 && startEpochMicrosec > $startEpochMicrosec - 60000 )\n    then\n\t\t$child.setParentId($root.getEventId());\n\t\tupdate($child);\n\t\t\nend\n\nrule \"root_has_child_handle_Rule\"\nsalience 150\nno-loop true\n\twhen\n\t\t$root : VesAlarm(alarmIsCleared == 0, rootFlag == 0, $eventId: eventId)\n\t\t$child : VesAlarm(eventId != $eventId, parentId == $eventId)\n\tthen\n\t\tDmaapService dmaapService = ServiceLocatorHolder.getLocator().getService(DmaapService.class);\n\t\tPolicyMsg policyMsg = dmaapService.getPolicyMsg($root, $child, \"org.onap.holmes.droolsRule\");\n        dmaapService.publishPolicyMsg(policyMsg, \"unauthenticated.DCAE_CL_OUTPUT\");\n\t\t$root.setRootFlag(1);\n\t\tupdate($root);\nend\n\nrule \"root_no_child_handle_Rule\"\nsalience 100\nno-loop true\n    when\n        $root : VesAlarm(alarmIsCleared == 0, rootFlag == 0,\n            sourceId != null && !sourceId.equals(\"\"),\n\t\t\tsourceName != null && !sourceName.equals(\"\"),\n            specificProblem in (\"Fault_SOTN_Service_Failure\"))\n    then\n\t\tDmaapService dmaapService = ServiceLocatorHolder.getLocator().getService(DmaapService.class);\n\t\tPolicyMsg policyMsg = dmaapService.getPolicyMsg($root, null, \"org.onap.holmes.droolsRule\");\n        dmaapService.publishPolicyMsg(policyMsg, \"unauthenticated.DCAE_CL_OUTPUT\");\n\t\t$root.setRootFlag(1);\n\t\tupdate($root);\nend\n\nrule \"root_cleared_handle_Rule\"\nsalience 100\nno-loop true\n    when\n        $root : VesAlarm(alarmIsCleared == 1, rootFlag == 1)\n    then\n\t\tDmaapService dmaapService = ServiceLocatorHolder.getLocator().getService(DmaapService.class);\n\t\tPolicyMsg policyMsg = dmaapService.getPolicyMsg($root, null, \"org.onap.holmes.droolsRule\");\n        dmaapService.publishPolicyMsg(policyMsg, \"unauthenticated.DCAE_CL_OUTPUT\");\n\t\tretract($root);\nend\n\nrule \"child_handle_Rule\"\nsalience 100\nno-loop true\n    when\n        $child : VesAlarm(alarmIsCleared == 1, rootFlag == 0)\n    then\n\t\tretract($child);\nend",
 
"enabled": 1
 
}

To illustrate, the content field in the above rule is presented as readable format in the following. We need to convert it to valid json string when uploading to Holmes.

Holmes Rule Content

package org.onap.holmes.droolsRule;
 
 
import org.onap.holmes.common.dmaap.DmaapService;
import org.onap.holmes.common.api.stat.VesAlarm;
import org.onap.holmes.common.aai.CorrelationUtil;
import org.onap.holmes.common.dmaap.entity.PolicyMsg;
import org.onap.holmes.common.dropwizard.ioc.utils.ServiceLocatorHolder;
import org.onap.holmes.common.utils.DroolsLog;
 
 
rule "Relation_analysis_Rule"
salience 200
no-loop true
    when
        $root : VesAlarm(alarmIsCleared == 0,
            $sourceId: sourceId, sourceId != null && !sourceId.equals(""),
            $sourceName: sourceName, sourceName != null && !sourceName.equals(""),
            $startEpochMicrosec: startEpochMicrosec,
            specificProblem in ("Fault_SOTN_Service_Failure"),
            $eventId: eventId)
        $child : VesAlarm( eventId != $eventId, parentId == null,
            specificProblem in ("Fault_SOTN_Service_Failure"),
            startEpochMicrosec < $startEpochMicrosec + 60000 && startEpochMicrosec > $startEpochMicrosec - 60000 )
    then
        $child.setParentId($root.getEventId());
        update($child);
end
 
 
rule "root_has_child_handle_Rule"
salience 150
no-loop true
    when
        $root : VesAlarm(alarmIsCleared == 0, rootFlag == 0, $eventId: eventId)
        $child : VesAlarm(eventId != $eventId, parentId == $eventId)
    then
        DmaapService dmaapService = ServiceLocatorHolder.getLocator().getService(DmaapService.class);
        PolicyMsg policyMsg = dmaapService.getPolicyMsg($root, $child, "org.onap.holmes.droolsRule");
        dmaapService.publishPolicyMsg(policyMsg, "unauthenticated.DCAE_CL_OUTPUT");
        $root.setRootFlag(1);
        update($root);
end
 
 
rule "root_no_child_handle_Rule"
salience 100
no-loop true
    when
        $root : VesAlarm(alarmIsCleared == 0, rootFlag == 0,
            sourceId != null && !sourceId.equals(""),
            sourceName != null && !sourceName.equals(""),
            specificProblem in ("Fault_SOTN_Service_Failure"))
    then
        DmaapService dmaapService = ServiceLocatorHolder.getLocator().getService(DmaapService.class);
        PolicyMsg policyMsg = dmaapService.getPolicyMsg($root, null, "org.onap.holmes.droolsRule");
        dmaapService.publishPolicyMsg(policyMsg, "unauthenticated.DCAE_CL_OUTPUT");
        $root.setRootFlag(1);
        update($root);
nend
 
 
rule "root_cleared_handle_Rule"
salience 100
no-loop true
    when
        $root : VesAlarm(alarmIsCleared == 1, rootFlag == 1)
    then
        DmaapService dmaapService = ServiceLocatorHolder.getLocator().getService(DmaapService.class);
        PolicyMsg policyMsg = dmaapService.getPolicyMsg($root, null, "org.onap.holmes.droolsRule");
        dmaapService.publishPolicyMsg(policyMsg, "unauthenticated.DCAE_CL_OUTPUT");
        retract($root);
end
 
 
rule "child_handle_Rule"
salience 100
no-loop true
    when
        $child : VesAlarm(alarmIsCleared == 1, rootFlag == 0)
    then
        retract($child);
end

Rule Execution

After the correlation is done successfully, there should be a corresponding control loop event defined in the following section published on the unauthenticated.DCAE_CL_OUTPUT topic of DMaaP.

POLICY

Policy Creation

Operational Policy

controlLoop:
  version: 2.0.0
  controlLoopName: ControlLoop-CCVPN-2179b738-fd36-4843-a71a-a8c24c70c55b
  trigger_policy: unique-policy-id-16-deleteE2EService
  timeout: 3600
  abatement: false
 
policies:
  - id: unique-policy-id-16-deleteE2EService
    name: Delete E2E Service
    description:
    actor: SO
    recipe: DeleteE2EService
    target:
      type: VM
    retry: 3
    timeout: 1200
    success: unique-policy-id-17-createE2EService
    failure: final_failure
    failure_timeout: final_failure_timeout
    failure_retries: final_failure_retries
    failure_exception: final_failure_exception
    failure_guard: final_failure_guard


  - id: unique-policy-id-17-createE2EService
    name: Create E2E Service
    description:
    actor: SO
    recipe: CreateE2EService
    target:
      type: VM
    retry: 3
    timeout: 1200
    success: final_success
    failure: final_failure
    failure_timeout: final_failure_timeout
    failure_retries: final_failure_retries
    failure_exception: final_failure_exception
    failure_guard: final_failure_guard

DCAE Control Loop Event (Holmes)

{
    "closedLoopEventClient": "DCAE.HolmesInstance",
    "policyVersion": "1.0.0.5",
    "policyName": "CCVPN",
    "policyScope": "service=SOTNService,type=SampleType,closedLoopControlName=CL-CCVPN-d925ed73-8231-4d02-9545-db4e101f88f8",
    "target_type": "VM",
    "AAI": {
        "service-instance.service-instance-id" : "TBD"
    },
    "closedLoopAlarmStart": 1484677482204798,
    "closedLoopEventStatus": "ONSET",
    "closedLoopControlName": "ControlLoop-CCVPN-2179b738-fd36-4843-a71a-a8c24c70c55b",
    "version": "1.0.2",
    "target": "vserver.vserver-name",
    "requestID": "97964e10-686e-4790-8c45-bdfa61df770f",
    "from": "DCAE"
}

Policy Engine subscribes the unauthenticated.DCAE_CL_OUTPUT on DMAAP.

Space shortcuts

Page tree