DCAE R6 TCA-GEN2 MicroService

Overview

Architecture Diagram

Artifacts

Βlueprint (deployment artifact) :

Input file (deployment input) :

Docker image : nexus3.onap.org:10001/onap/<>

Deployment Prerequisite/dependencies

Deployment Steps

Deployment of Tca-gen2 can be done using Dashboard UI or CloudifyUI or via CLI. Below steps are based on CLI.

Transfer blueprint component file in DCAE bootstrap POD under /blueprints directory
Transfer blueprint component inputs file in DCAE bootstrap POD under / directory
Log-in to the DCAE bootstrap POD's main container

Validate blueprint

Validate Blueprint

cfy blueprints validate /blueprints/k8s-tca-gen2.yaml

Verify Plugin versions in target Cloudify instance match to blueprint imports
Verify Plugin version
```
cfy plugins list
```
If the version of plugin used are different, update the blueprint import to match.

Deploy Service

Upload and deploy blueprint

cfy install -b tca-gen2 -d tca-gen2 -i /k8s-tca-gen2-inputs.yaml /blueprints/k8s-tca-gen2.yaml

To un-deploy

Uninstall running component and delete deployment
Uninstall component
```
cfy uninstall tca-gen2
```
Delete blueprint
Delete blueprint
```
cfy blueprints delete tca-gen2
```

Initial Validation

After deployment, verify if tca-gen2 POD and mongoDB pod are running correctly

Verify Heartbeat is running

root@k8s-rancher:~# kubectl get pods -n onap | egrep "tca-gen2|mongoDB"

And then check the logs to see if it can connect to DMaaP, polling for events.

Verify Logs for Dmaap poll

kubectl logs -f -n onap dep-dcae-tca-gen2-service-5ff7558fd-4nt6z  dcae-tca-gen2-service
.
.

Functional tests

Following default configuration is loaded into tca-gen2 (set in blueprint configuration)

Configuration

To simulate the event flow and trigger missing tca-gen2 event, we can simulate a VES event into tca-gen2 subscription topic (using curl).

Generate tca-gen2 CL Onset

Send a triggering event to DMaaP topic unauthenticated.SEC_tca-gen2_OUTPUT

Before sending, validate following

Correct DMaaP address
"eventName" field in VES input matches eventName configuration set in tca-gen2 Service
"lastEpochMicrosec" in reflecting current time stamp approximately

Trigger a Heartbeat

curl -X POST http://10.12.5.8:30227/events/unauthenticated.SEC_tca-gen2_OUTPUT -H 'Content-Type: application/json' -d '{
        "event": {
                "commonEventHeader": {
                        "startEpochMicrosec": 1556753402000,
                        "sourceId": "79e90d76-513a-4f79-886d-470a0037c5cf",
                        "eventId": "tca-gen2_vDNS_10.0.0.1",
                        "nfcNamingCode": "DNS",
                        "reportingEntityId": "79e90d76-513a-4f79-886d-470a0037c5cf",
                        "eventType": "applicationVnf",
                        "priority": "Normal",
                        "version": 3,
                        "reportingEntityName": "testcmd001",
                        "sequence": 36312,
                        "domain": "tca-gen2",
                        "lastEpochMicrosec": 1556753402000,
                        "eventName": "tca-gen2_vDNS",
                        "sourceName": "testnode001",
                        "nfNamingCode": "MDNS"
                }
        }
}'

Logs showing VES heartbeat event being processed

We can check that a new DCAE_CL_OUTPUT event has been published (make sure you target the correct DMaaP IP address)

Fetch events from DCAE_CL_OUTPUT topic

curl http://10.12.5.8:30227/events/unauthenticated.DCAE_CL_OUTPUT/vv/1

Published event

["{\"closedLoopEventClient\": \"DCAE_tca-gen2_MS\", \"policyVersion\": \"1.0.0.5\", \"policyName\": \"vFireWall\", \"policyScope\": \"resource=sampleResource,type=sampletype,CLName=sampleCLName\", \"target_type\": \"VNF\", \"AAI\": {\"generic-vnf.vnf-name\": \"testnode001\"}, \"closedLoopAlarmStart\": 1556768124419, \"closedLoopEventStatus\": \"ONSET\", \"closedLoopControlName\": \"ControlLoopEvent1\", \"version\": \"1.0\", \"target\": \"genVnfName\", \"requestID\": \"8c1b8bd8-06f7-493f-8ed7-daaa4cc481bc\", \"from\": \"DCAE\"}"]

Generate tca-gen2 CL Abatement Event

Send a triggering event to DMaaP topic unauthenticated.SEC_tca-gen2_OUTPUT

Before sending, validate following

Correct DMaaP address
"eventName" field in VES input matches eventName configuration set in tca-gen2 Service
"lastEpochMicrosec" in reflecting current time stamp approximately
Ensure the event is on the same "sourceName" as original event sent

Resend heartbeat with new timestamp

curl -X POST http://10.12.5.8:30227/events/unauthenticated.SEC_tca-gen2_OUTPUT -H 'Content-Type: application/json' -d '{
        "event": {
                "commonEventHeader": {
                        "startEpochMicrosec": 1556768319000,
                        "sourceId": "79e90d76-513a-4f79-886d-470a0037c5cf",
                        "eventId": "tca-gen2_vDNS_10.0.0.1",
                        "nfcNamingCode": "DNS",
                        "reportingEntityId": "79e90d76-513a-4f79-886d-470a0037c5cf",
                        "eventType": "applicationVnf",
                        "priority": "Normal",
                        "version": 3,
                        "reportingEntityName": "testcmd001",
                        "sequence": 36312,
                        "domain": "tca-gen2",
                        "lastEpochMicrosec": 1556768319000,
                        "eventName": "tca-gen2_vDNS",
                        "sourceName": "testnode001",
                        "nfNamingCode": "MDNS"
                }
        }
}'

Logs showing CL abatement event generation

We can check that a new DCAE_CL_OUTPUT event has been published (make sure you target the correct DMaaP IP address)

Fetch events from DCAE_CL_OUTPUT topic

curl http://10.12.5.8:30227/events/unauthenticated.DCAE_CL_OUTPUT/vv/1

CL Abatement Published event

["{\"closedLoopEventClient\": \"DCAE_tca-gen2_MS\", \"policyVersion\": \"1.0.0.5\", \"policyName\": \"vFireWall\", \"policyScope\": \"resource=sampleResource,type=sampletype,CLName=sampleCLName\", \"target_type\": \"VNF\", \"AAI\": {\"generic-vnf.vnf-name\": \"testnode001\"}, \"closedLoopAlarmStart\": 1556768386209, \"closedLoopEventStatus\": \"ABATED\", \"closedLoopControlName\": \"ControlLoopEvent1\", \"version\": \"1.0\", \"target\": \"genVnfName\", \"requestID\": \"8c1b8bd8-06f7-493f-8ed7-daaa4cc481bc\", \"from\": \"DCAE\"}"]

Dynamic Configuration Update

As the tca-gen2 service periodically polls Consul KV using configbindingService api's - the run time configuration of tca-gen2 service can be updated dynamically without having to redeploy/restart the service. The updates to configuration can be triggered either from Policy (or CLAMP) or made directly in Consul.

Locate the servicename by executing into tca-gen2 Service pod and getting env HOSTNAME value

ServiceName of Heartbeat Service

root@k8s-rancher:~# kubectl exec -it -n onap dep-s78f36f2daf0843518f2e25184769eb8b-dcae-tca-gen2-servithzx2 /bin/bash
Defaulting container name to s78f36f2daf0843518f2e25184769eb8b-dcae-tca-gen2-service.
Use 'kubectl describe pod/dep-s78f36f2daf0843518f2e25184769eb8b-dcae-tca-gen2-servithzx2 -n onap' to see all of the containers in this pod.

misshtbt@s78f36f2daf0843518f2e25184769eb8b-dcae-tca-gen2-service:~/bin$ env | grep HOSTNAME
HOSTNAME=s78f36f2daf0843518f2e25184769eb8b-dcae-tca-gen2-service

Change the configuration for Service in KV-store through UI

Consul URL

http://<k8snodeip>:30270/ui/#/dc1/kv/

Consul Snapshot <>

Space shortcuts

Page tree