SDC Build Instructions

Before starting make sure you have a working development environment.

You can follow the Setting Up Your Development Environment Page.

Table Of Contents:

Required Tools

The computer must have the following software packages installed:

Latest node version, currently 6.9.5 or higher (Installs the needed version of npm as well) you can download from here: https://nodejs.org/
Latest maven vesrion, currently 3.3.9
JDK 8, you can download from here: http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html

Clone Repositories

Create a sdc folder and run the following command

Cloning SDC project

git clone http://gerrit.onap.org/r/sdc

Building SDC

Maven settings.xml

Ensure Maven settings.xml contains ONAP and OpenDaylight nexus repositories. See Setting Up Your Development Environment#MavenExamplesettings.xml

Now all you need to is to build the project:

Building SDC project

cd c:\dvlp\sdc


mvn clean install

Installing SDC

1 Overview

SDC is deployed using a HEAT template that bootstraps a VM machine on the Rackspace cloud. Assuming that the deployment runs as expected then the following System setup, prerequisites and requirements should automatically be put in place.

This document describes the manual processes required to perform any one of the automated steps, if the deployment did not run to completion as expected.

The document deals with several key topics:

System setup and prerequisites
Manual system setup
SDC application setup
SDCconsumers setup

2 System setup and prerequisites

Operating system requirements

Ubuntu v16.04
Volume allocated and named /data
Docker service installed, up and running
Docker is connected to the Docker hub repository

SDC application requirements

<environment>.json located under: /data/ASDC/environments
docker_health.sh script located under: /data/scripts
docker_run.sh script located under: /data/scripts

3 Manual system setup

The manual system setup consists of :

Installing the Docker service
Updating Ubuntu to the latest version available on the Rackspace repository
Allocating volume for /data
Setting the connection to the Docker hub repository

Installing the Docker service

Start the Rackspace machine
A. Login to Rackspace console
B. Start the Rackspace VM
C. Login to the Rackspace server with the credentials given by Rackspace
Check Ubuntu uname:
uname -r

The output needs to be grater then 3.13.0-91-generic:
```
For example:
root@vm1-asdc:/data# uname -r
4.4.0-51-generic
```

Install the Docker service:
A. Login to the new machine as root and run:

apt-get update
apt-get install apt-transport-https ca-certificates (Press Y)
apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D
echo "deb https://apt.dockerproject.org/repo ubuntu-trusty main" | tee /etc/apt/sources.list.d/docker.list
apt-get update
apt-cache policy docker-engine
apt-get -y install linux-image-extra-$(uname -r) linux-image-extra-virtual
apt-get -y install docker-engine
service docker start

B. Verify that Java is installed:
java -version

C. If Java is not installed then run:

apt-get install default-jre
apt-get update

A system restart is required; reboot the server.

Updating Ubuntu to the latest version available on the Rackspace repository

Login to the Rackspace server:
The output for a successful login will be displayed; check the version, for example:
```
Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.4.0-51-generic x86_64)
```
Upgrade UBUNTU (only if version is below 16.04.1 LTS):
Run: do-release-upgrade (press y, press enter twice, y, select “install the package maintainer's version”, y, y - for reboot)

this will update Ubuntu from 14.04.1 LTS to 16.04.1 LTS

Allocating a volume for data

vi /etc/fstab, add this line:

/dev/xvdb1 /data ext4 errors=remount-ro,noatime,barrier=0 0 1

Check that the volume is mounted:
```
df -h | grep data
```
The expected result should be in the form:
```
/dev/xvdb1 99G 528M 93G 1% /data
```

Set connection to Docker hub repository

This section deals with connecting to the OpenECOMP SDC Docker repository and checking that the Docker Service is up and running.

To set the connection to the Docker hub repository:

1. add to /etc/hosts "10.208.197.75 ecomp-nexus"
2. Connect to OpenEcomp SDC docker-repo (only if needed):
  1. keytool -printcert -sslserver ecomp-nexus:8443 -rfc > nexus.crt
  2. cp nexus.crt /usr/local/share/ca-certificates/
  3. update-ca-certificates
  4. service docker restart
    1. docker stop/waiting
    2. docker start/running, process 6518
3. Check that the Docker service is up and running by running the command:
  1. service docker status

4 SDC application setup

This section runs a script to start the Dockers and boot the system. The script takes the latest Dockers from the Docker repository. The boot process takes approximately 1 minute.

Starting the SDC application

The SDC application is executed using several Dockers

To start the dockers:

Run the script in the format usage as described:
Usage: /data/scripts/docker_run.sh -e <environment name> -r <release> -p <docker-hub-port>

Note: the use of spaces and dashes in the script format is mandatory.
Example usage as for the Orange environment:
```
/data/scripts/docker_run.sh -e Orange -r 1610.2.12 -p 51220
```

A Health check to verify that OpenECOMP SDC is up and running is conducted as part of the docker_run.sh script. The expected output would look similar to that provided:

Health Check Output

root@vm1-asdc:~# /data/scripts/docker_health.sh
{
	"cluster_name" : "ASDC-ES-OS-ETE-DFW",
	"status" : "green",
	"timed_out" : false,
	"number_of_nodes" : 1,
	"number_of_data_nodes" : 1,
	"active_primary_shards" : 1,
	"active_shards" : 1,
	"relocating_shards" : 0,
	"initializing_shards" : 0,
	"unassigned_shards" : 0,
	"delayed_unassigned_shards" : 0,
	"number_of_pending_tasks" : 0,
	"number_of_in_flight_fetch" : 0,
	"task_max_waiting_in_queue_millis" : 0,
	"active_shards_percent_as_number" : 100.0
}


BE health-Check:
{
	"sdcVersion": "1610.2.12",
	"siteMode": "unknown",
	"componentsInfo": [
		{
			"healthCheckComponent": "BE",
			"healthCheckStatus": "UP",
			"version": "1610.2.12",
			"description": "OK"
		},
		{
			"healthCheckComponent": "ES",
			"healthCheckStatus": "UP",
			"description": "OK"
		},
		{
			"healthCheckComponent": "TITAN",
			"healthCheckStatus": "UP",
			"description": "OK"
		},
		{
			"healthCheckComponent": "DE",
			"healthCheckStatus": "UP",
			"description": "OK"
		}
	]
}
FE health-Check:
{
	"sdcVersion": "1610.2.12",
	"siteMode": "unknown",
	"componentsInfo": [
		{
			"healthCheckComponent": "BE",
			"healthCheckStatus": "UP",
			"version": "1610.2.12",
			"description": "OK"
		},
		{
			"healthCheckComponent": "ES",
			"healthCheckStatus": "UP",
			"description": "OK"
		},
		{
			"healthCheckComponent": "TITAN",
			"healthCheckStatus": "UP",
			"description": "OK"
		},
		{
			"healthCheckComponent": "DE",
			"healthCheckStatus": "UP",
			"description": "OK"
		},
		{
			"healthCheckComponent": "FE",
			"healthCheckStatus": "UP",
			"version": "1610.2.12",
			"description": "OK"
		}
	]
}
[{"firstName":"Carlos","lastName":"Santana","userId":"cs0008","email":"designer@sdc.com","role":"DESIGNER","lastLoginTime":1483900163928,"status":"ACTIVE","fullName":"Carlos Santana"}]

Space shortcuts

Page tree