- Created by shitao li, last modified on Jan 24, 2019
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 6 Next »
tosca.datatypes.nfv.L2AddressData Expand source
tosca.datatypes.nfv.L2AddressData: derived_from: tosca.datatypes.Root description: Describes the information on the MAC addresses to be assigned to a connection point. properties: mac_address_assignment: type: boolean description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility required: true
tosca.datatypes.nfv.L3AddressData Expand source
tosca.datatypes.nfv.L3AddressData: derived_from: tosca.datatypes.Root description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP properties: ip_address_assignment: type: boolean description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility required: true floating_ip_activated: type: boolean description: Specifies if the floating IP scheme is activated on the Connection Point or not required: true ip_address_type: type: string description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp required: false constraints: - valid_values: [ ipv4, ipv6 ] number_of_ip_address: type: integer description: Minimum number of IP addresses to be assigned required: false constraints: - greater_than: 0
tosca.datatypes.nfv.AddressData Expand source
tosca.datatypes.nfv.AddressData: derived_from: tosca.datatypes.Root description: Describes information about the addressing scheme and parameters applicable to a CP properties: address_type: type: string description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point required: true constraints: - valid_values: [ mac_address, ip_address ] l2_address_data: type: tosca.datatypes.nfv.L2AddressData description: Provides the information on the MAC addresses to be assigned to a connection point. required: false l3_address_data: type: tosca.datatypes.nfv.L3AddressData description: Provides the information on the IP addresses to be assigned to a connection point required: false
tosca.datatypes.nfv.VirtualNetworkInterfaceRequirements Expand source
tosca.datatypes.nfv.VirtualNetworkInterfaceRequirements: derived_from: tosca.datatypes.Root description: Describes requirements on a virtual network interface properties: name: type: string description: Provides a human readable name for the requirement. required: false description: type: string description: Provides a human readable description of the requirement. required: false support_mandatory: type: boolean description: Indicates whether fulfilling the constraint is mandatory (TRUE) for successful operation or desirable (FALSE). required: true network_interface_requirements: type: map description: The network interface requirements. A map of strings that contain a set of key-value pairs that describes the hardware platform specific network interface deployment requirements. required: true entry_schema: type: string nic_io_requirements: type: tosca.datatypes.nfv.LogicalNodeData description: references (couples) the CP with any logical node I/O requirements (for network devices) that may have been created. Linking these attributes is necessary so that so that I/O requirements that need to be articulated at the logical node level can be associated with the network interface requirements associated with the CP. required: false
tosca.datatypes.nfv.ConnectivityType Expand source
tosca.datatypes.nfv.ConnectivityType: derived_from: tosca.datatypes.Root description: describes additional connectivity information of a virtualLink properties: layer_protocols: type: list description: Identifies the protocol a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire).The top layer protocol of the virtualLink protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers. required: true entry_schema: type: string constraints: - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] flow_pattern: type: string description: Identifies the flow pattern of the connectivity required: false constraints: - valid_values: [ line, tree, mesh ]
tosca.datatypes.nfv.RequestedAdditionalCapability Expand source
tosca.datatypes.nfv.RequestedAdditionalCapability: derived_from: tosca.datatypes.Root description: describes requested additional capability for a particular VDU properties: requested_additional_capability_name: type: string description: Identifies a requested additional capability for the VDU. required: true support_mandatory: type: boolean description: Indicates whether the requested additional capability is mandatory for successful operation. required: true min_requested_additional_capability_version: type: string description: Identifies the minimum version of the requested additional capability. required: false preferred_requested_additional_capability_version: type: string description: Identifies the preferred version of the requested additional capability. required: false target_performance_parameters: type: map description: Identifies specific attributes, dependent on the requested additional capability type. required: true entry_schema: type: string
tosca.datatypes.nfv.VirtualMemory Expand source
tosca.datatypes.nfv.VirtualMemory: derived_from: tosca.datatypes.Root description: supports the specification of requirements related to virtual memory of a virtual compute resource properties: virtual_mem_size: type: scalar-unit.size description: Amount of virtual memory. required: true virtual_mem_oversubscription_policy: type: string description: The memory core oversubscription policy in terms of virtual memory to physical memory on the platform. required: false vdu_mem_requirements: type: map description: The hardware platform specific VDU memory requirements. A map of strings that contains a set of key-value pairs that describes hardware platform specific VDU memory requirements. required: false entry_schema: type: string numa_enabled: type: boolean description: It specifies the memory allocation to be cognisant of the relevant process/core allocation. required: false default: false
tosca.datatypes.nfv.VirtualCpuPinning Expand source
tosca.datatypes.nfv.VirtualCpuPinning: derived_from: tosca.datatypes.Root description: Supports the specification of requirements related to the virtual CPU pinning configuration of a virtual compute resource properties: virtual_cpu_pinning_policy: type: string description: 'Indicates the policy for CPU pinning. The policy can take values of "static" or "dynamic". In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g.: SMT (Simultaneous Multi-Threading) requirements). In case of "static" the allocation is requested to be according to the virtual_cpu_pinning_rule.' required: false constraints: - valid_values: [ static, dynamic ] virtual_cpu_pinning_rule: type: list description: Provides the list of rules for allocating virtual CPU cores to logical CPU cores/threads required: false entry_schema: type: string
tosca.datatypes.nfv.VirtualCpu Expand source
tosca.datatypes.nfv.VirtualCpu: derived_from: tosca.datatypes.Root description: Supports the specification of requirements related to virtual CPU(s) of a virtual compute resource properties: cpu_architecture: type: string description: CPU architecture type. Examples are x86, ARM required: false num_virtual_cpu: type: integer description: Number of virtual CPUs required: true constraints: - greater_than: 0 virtual_cpu_clock: type: scalar-unit.frequency description: Minimum virtual CPU clock rate required: false virtual_cpu_oversubscription_policy: type: string description: CPU core oversubscription policy e.g. the relation of virtual CPU cores to physical CPU cores/threads. required: false vdu_cpu_requirements: type: map description: The hardware platform specific VDU CPU requirements. A map of strings that contains a set of key-value pairs describing VDU CPU specific hardware platform requirements. required: false entry_schema: type: string virtual_cpu_pinning: type: tosca.datatypes.nfv.VirtualCpuPinning description: The virtual CPU pinning configuration for the virtualised compute resource. required: false
tosca.datatypes.nfv.VnfcConfigurableProperties Expand source
tosca.datatypes.nfv.VnfcConfigurableProperties: derived_from: tosca.datatypes.Root description: Defines the configurable properties of a VNFC # properties: # additional_vnfc_configurable_properties: # type: tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties # description: Describes additional configuration for VNFC that # can be modified using the ModifyVnfInfo operation # required: false # derived types are expected to introduce # additional_vnfc_configurable_properties with its type derived from # tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties
tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties Expand source
tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties: derived_from: tosca.datatypes.Root description: VnfcAdditionalConfigurableProperties type is an empty base type for deriving data types for describing additional configurable properties for a given VNFC.
tosca.datatypes.nfv.VduProfile Expand source
tosca.datatypes.nfv.VduProfile: derived_from: tosca.datatypes.Root description: describes additional instantiation data for a given Vdu.Compute used in a specific deployment flavour. properties: min_number_of_instances: type: integer description: Minimum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour. required: true constraints: - greater_or_equal: 0 max_number_of_instances: type: integer description: Maximum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour. required: true constraints: - greater_or_equal: 0
tosca.datatypes.nfv.VlProfile Expand source
tosca.datatypes.nfv.VlProfile: derived_from: tosca.datatypes.Root description: Describes additional instantiation data for a given VL used in a specific VNF deployment flavour. properties: max_bitrate_requirements: type: tosca.datatypes.nfv.LinkBitrateRequirements description: Specifies the maximum bitrate requirements for a VL instantiated according to this profile. required: true min_bitrate_requirements: type: tosca.datatypes.nfv.LinkBitrateRequirements description: Specifies the minimum bitrate requirements for a VL instantiated according to this profile. required: true qos: type: tosca.datatypes.nfv.Qos description: Specifies the QoS requirements of a VL instantiated according to this profile. required: false virtual_link_protocol_data: type: list description: Specifies the protocol data for a virtual link. required: false entry_schema: type: tosca.datatypes.nfv.VirtualLinkProtocolData
tosca.datatypes.nfv.VirtualLinkProtocolData Expand source
tosca.datatypes.nfv.VirtualLinkProtocolData: derived_from: tosca.datatypes.Root description: describes one protocol layer and associated protocol data for a given virtual link used in a specific VNF deployment flavour properties: associated_layer_protocol: type: string description: Identifies one of the protocols a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire) as specified by the connectivity_type property. required: true constraints: - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] l2_protocol_data: type: tosca.datatypes.nfv.L2ProtocolData description: Specifies the L2 protocol data for a virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L2 protocol and shall be absent otherwise. required: false l3_protocol_data: type: tosca.datatypes.nfv.L3ProtocolData description: Specifies the L3 protocol data for this virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L3 protocol and shall be absent otherwise. required: false
tosca.datatypes.nfv.L2ProtocolData Expand source
tosca.datatypes.nfv.L2ProtocolData: derived_from: tosca.datatypes.Root description: describes L2 protocol data for a given virtual link used in a specific VNF deployment flavour. properties: name: type: string description: Identifies the network name associated with this L2 protocol. required: false network_type: type: string description: Specifies the network type for this L2 protocol.The value may be overridden at run-time. required: false constraints: - valid_values: [ flat, vlan, vxlan, gre ] vlan_transparent: type: boolean description: Specifies whether to support VLAN transparency for this L2 protocol or not. required: false default: false mtu: type: integer description: Specifies the maximum transmission unit (MTU) value for this L2 protocol. required: false constraints: - greater_than: 0
tosca.datatypes.nfv.L3ProtocolData Expand source
tosca.datatypes.nfv.L3ProtocolData: derived_from: tosca.datatypes.Root description: describes L3 protocol data for a given virtual link used in a specific VNF deployment flavour. properties: name: type: string description: Identifies the network name associated with this L3 protocol. required: false ip_version: type: string description: Specifies IP version of this L3 protocol.The value of the ip_version property shall be consistent with the value of the layer_protocol in the connectivity_type property of the virtual link node. required: true constraints: - valid_values: [ ipv4, ipv6 ] cidr: type: string description: Specifies the CIDR (Classless Inter-Domain Routing) of this L3 protocol. The value may be overridden at run-time. required: true ip_allocation_pools: type: list description: Specifies the allocation pools with start and end IP addresses for this L3 protocol. The value may be overridden at run-time. required: false entry_schema: type: tosca.datatypes.nfv.IpAllocationPool gateway_ip: type: string description: Specifies the gateway IP address for this L3 protocol. The value may be overridden at run-time. required: false dhcp_enabled: type: boolean description: Indicates whether DHCP (Dynamic Host Configuration Protocol) is enabled or disabled for this L3 protocol. The value may be overridden at run-time. required: false ipv6_address_mode: type: string description: Specifies IPv6 address mode. May be present when the value of the ipVersion attribute is "ipv6" and shall be absent otherwise. The value may be overridden at run-time. required: false constraints: - valid_values: [ slaac, dhcpv6-stateful, dhcpv6-stateless ]
tosca.datatypes.nfv.IpAllocationPool Expand source
tosca.datatypes.nfv.IpAllocationPool: derived_from: tosca.datatypes.Root description: Specifies a range of IP addresses properties: start_ip_address: type: string description: The IP address to be used as the first one in a pool of addresses derived from the cidr block full IP range required: true end_ip_address: type: string description: The IP address to be used as the last one in a pool of addresses derived from the cidr block full IP range required: true
tosca.datatypes.nfv.VduLevel Expand source
tosca.datatypes.nfv.VduLevel: derived_from: tosca.datatypes.Root description: Indicates for a given Vdu.Compute in a given level the number of instances to deploy properties: number_of_instances: type: integer description: Number of instances of VNFC based on this VDU to deploy for this level. required: true constraints: - greater_or_equal: 0
tosca.datatypes.nfv.InstantiationLevel Expand source
tosca.datatypes.nfv.InstantiationLevel: derived_from: tosca.datatypes.Root description: Describes the scale level for each aspect that corresponds to a given level of resources to be instantiated within a deployment flavour in term of the number VNFC instances properties: description: type: string description: Human readable description of the level required: true scale_info: type: map # key: aspectId description: Represents for each aspect the scale level that corresponds to this instantiation level. scale_info shall be present if the VNF supports scaling. required: false entry_schema: type: tosca.datatypes.nfv.ScaleInfo
tosca.datatypes.nfv.VnfLcmOperationsConfiguration Expand source
tosca.datatypes.nfv.VnfLcmOperationsConfiguration: derived_from: tosca.datatypes.Root description: Represents information to configure lifecycle management operations properties: instantiate: type: tosca.datatypes.nfv.VnfInstantiateOperationConfiguration description: Configuration parameters for the InstantiateVnf operation required: false scale: type: tosca.datatypes.nfv.VnfScaleOperationConfiguration description: Configuration parameters for the ScaleVnf operation required: false scale_to_level: type: tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration description: Configuration parameters for the ScaleVnfToLevel operation required: false change_flavour: type: tosca.datatypes.nfv.VnfChangeFlavourOperationConfiguration description: Configuration parameters for the changeVnfFlavourOpConfig operation required: false heal: type: tosca.datatypes.nfv.VnfHealOperationConfiguration description: Configuration parameters for the HealVnf operation required: false terminate: type: tosca.datatypes.nfv.VnfTerminateOperationConfiguration description: Configuration parameters for the TerminateVnf operation required: false operate: type: tosca.datatypes.nfv.VnfOperateOperationConfiguration description: Configuration parameters for the OperateVnf operation required: false change_ext_connectivity: type: tosca.datatypes.nfv.VnfChangeExtConnectivityOperationConfiguration description: Configuration parameters for the changeExtVnfConnectivityOpConfig operation required: false
tosca.datatypes.nfv.VnfInstantiateOperationConfiguration Expand source
tosca.datatypes.nfv.VnfInstantiateOperationConfiguration: derived_from: tosca.datatypes.Root description: represents information that affect the invocation of the InstantiateVnf operation.
tosca.datatypes.nfv.VnfScaleOperationConfiguration Expand source
tosca.datatypes.nfv.VnfScaleOperationConfiguration: derived_from: tosca.datatypes.Root description: Represents information that affect the invocation of the ScaleVnf operation properties: scaling_by_more_than_one_step_supported: type: boolean description: Signals whether passing a value larger than one in the numScalingSteps parameter of the ScaleVnf operation is supported by this VNF. required: false default: false
tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration Expand source
tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration: derived_from: tosca.datatypes.Root description: represents information that affect the invocation of the ScaleVnfToLevel operation properties: arbitrary_target_levels_supported: type: boolean description: Signals whether scaling according to the parameter "scaleInfo" is supported by this VNF required: true
tosca.datatypes.nfv.VnfHealOperationConfiguration Expand source
tosca.datatypes.nfv.VnfHealOperationConfiguration: derived_from: tosca.datatypes.Root description: represents information that affect the invocation of the HealVnf operation properties: causes: type: list description: Supported "cause" parameter values required: false entry_schema: type: string
tosca.datatypes.nfv.VnfTerminateOperationConfiguration Expand source
tosca.datatypes.nfv.VnfTerminateOperationConfiguration: derived_from: tosca.datatypes.Root description: represents information that affect the invocation of the TerminateVnf properties: min_graceful_termination_timeout: type: scalar-unit.time description: Minimum timeout value for graceful termination of a VNF instance required: true max_recommended_graceful_termination_timeout: type: scalar-unit.time description: Maximum recommended timeout value that can be needed to gracefully terminate a VNF instance of a particular type under certain conditions, such as maximum load condition. This is provided by VNF provider as information for the operator facilitating the selection of optimal timeout value. This value is not used as constraint required: false
tosca.datatypes.nfv.VnfOperateOperationConfiguration Expand source
tosca.datatypes.nfv.VnfOperateOperationConfiguration: derived_from: tosca.datatypes.Root description: represents information that affect the invocation of the OperateVnf operation properties: min_graceful_stop_timeout: type: scalar-unit.time description: Minimum timeout value for graceful stop of a VNF instance required: true max_recommended_graceful_stop_timeout: type: scalar-unit.time description: Maximum recommended timeout value that can be needed to gracefully stop a VNF instance of a particular type under certain conditions, such as maximum load condition. This is provided by VNF provider as information for the operator facilitating the selection of optimal timeout value. This value is not used as constraint required: false
tosca.datatypes.nfv.ScaleInfo Expand source
tosca.datatypes.nfv.ScaleInfo: derived_from: tosca.datatypes.Root description: Indicates for a given scaleAspect the corresponding scaleLevel properties: scale_level: type: integer description: The scale level for a particular aspect required: true constraints: - greater_or_equal: 0
tosca.datatypes.nfv.ScalingAspect Expand source
tosca.datatypes.nfv.ScalingAspect: derived_from: tosca.datatypes.Root properties: name: type: string required: true description: type: string required: true max_scale_level: type: integer # positiveInteger required: true constraints: - greater_or_equal: 0 step_deltas: type: list required: false entry_schema: type: string # Identifier
tosca.datatypes.nfv.LinkBitrateRequirements Expand source
tosca.datatypes.nfv.LinkBitrateRequirements: derived_from: tosca.datatypes.Root description: describes the requirements in terms of bitrate for a virtual link properties: root: type: integer # in bits per second description: Specifies the throughput requirement in bits per second of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN). required: true constraints: - greater_or_equal: 0 leaf: type: integer # in bits per second description: Specifies the throughput requirement in bits per second of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E LAN branches). required: false constraints: - greater_or_equal: 0
tosca.datatypes.nfv.Qos Expand source
tosca.datatypes.nfv.Qos: derived_from: tosca.datatypes.Root description: describes QoS data for a given VL used in a VNF deployment flavour properties: latency: type: scalar-unit.time #Number description: Specifies the maximum latency required: true constraints: - greater_than: 0 s packet_delay_variation: type: scalar-unit.time #Number description: Specifies the maximum jitter required: true constraints: - greater_or_equal: 0 s packet_loss_ratio: type: float description: Specifies the maximum packet loss ratio required: false constraints: - in_range: [ 0.0, 1.0 ]
tosca.datatypes.nfv.VnfConfigurableProperties Expand source
tosca.datatypes.nfv.VnfConfigurableProperties: derived_from: tosca.datatypes.Root description: indicates configuration properties for a given VNF (e.g. related to auto scaling and auto healing). properties: is_autoscale_enabled: type: boolean description: It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality. If the properties is not present for configuring, then VNF property is not supported required: false is_autoheal_enabled: type: boolean description: It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality. If the properties is not present for configuring, then VNF property is not supported required: false # additional_configurable_properties: # description: It provides VNF specific configurable properties that # can be modified using the ModifyVnfInfo operation # required: false # type: tosca.datatypes.nfv.VnfAdditionalConfigurableProperties # derived types are expected to introduce # additional_configurable_properties with its type derived from # tosca.datatypes.nfv.VnfAdditionalConfigurableProperties
tosca.datatypes.nfv.VnfInfoModifiableAttributes Expand source
tosca.datatypes.nfv.VnfInfoModifiableAttributes: derived_from: tosca.datatypes.Root description: Describes VNF-specific extension and metadata for a given VNF #properties: #extensions: #type: tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions #description: "Extension" properties of VnfInfo that are writeable #required: false # derived types are expected to introduce # extensions with its type derived from # tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions #metadata: #type: tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata #description: "Metadata" properties of VnfInfo that are writeable #required: false # derived types are expected to introduce # metadata with its type derived from # tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata
tosca.datatypes.nfv.VnfAdditionalConfigurableProperties Expand source
tosca.datatypes.nfv.VnfAdditionalConfigurableProperties: derived_from: tosca.datatypes.Root description: is an empty base type for deriving data types for describing additional configurable properties for a given VNF
tosca.datatypes.nfv.CpProtocolData Expand source
tosca.datatypes.nfv.CpProtocolData: derived_from: tosca.datatypes.Root description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information properties: associated_layer_protocol: type: string required: true description: One of the values of the property layer_protocols of the CP constraints: - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] address_data: type: list description: Provides information on the addresses to be assigned to the CP entry_schema: type: tosca.datatypes.nfv.AddressData required: false
tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions Expand source
tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions: derived_from: tosca.datatypes.Root description: is an empty base type for deriving data types for describing VNF-specific extension
tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata Expand source
tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata: derived_from: tosca.datatypes.Root description: is an empty base type for deriving data types for describing VNF-specific metadata
tosca.datatypes.nfv.LogicalNodeData Expand source
tosca.datatypes.nfv.LogicalNodeData: derived_from: tosca.datatypes.Root description: Describes compute, memory and I/O requirements associated with a particular VDU. properties: logical_node_requirements: type: map description: The logical node-level compute, memory and I/O requirements. A map of strings that contains a set of key-value pairs that describes hardware platform specific deployment requirements, including the number of CPU cores on this logical node, a memory configuration specific to a logical node or a requirement related to the association of an I/O device with the logical node. required: false entry_schema: type: string
tosca.datatypes.nfv.SwImageData Expand source
tosca.datatypes.nfv.SwImageData: derived_from: tosca.datatypes.Root description: describes information related to a software image artifact properties: # in SOL001 v0.8.0: "properties or metadata:" name: type: string description: Name of this software image required: true version: type: string description: Version of this software image required: true checksum: type: string description: Checksum of the software image file required: true container_format: type: string description: The container format describes the container file format in which software image is provided required: true constraints: - valid_values: [ aki, ami, ari, bare, docker, ova, ovf ] disk_format: type: string description: The disk format of a software image is the format of the underlying disk image required: true constraints: - valid_values: [ aki, ami, ari, iso, qcow2, raw, vdi, vhd, vhdx, vmdk ] min_disk: type: scalar-unit.size # Number description: The minimal disk size requirement for this software image required: true min_ram: type: scalar-unit.size # Number description: The minimal RAM requirement for this software image required: false size: type: scalar-unit.size # Number description: The size of this software image required: true operating_system: type: string description: Identifies the operating system used in the software image required: false supported_virtualisation_environments: type: list description: Identifies the virtualisation environments (e.g. hypervisor) compatible with this software image required: false entry_schema: type: string
tosca.datatypes.nfv.VirtualBlockStorageData Expand source
tosca.datatypes.nfv.VirtualBlockStorageData: derived_from: tosca.datatypes.Root description: VirtualBlockStorageData describes block storage requirements associated with compute resources in a particular VDU, either as a local disk or as virtual attached storage properties: size_of_storage: type: scalar-unit.size description: Size of virtualised storage resource required: true vdu_storage_requirements: type: map description: The hardware platform specific storage requirements. A map of strings that contains a set of key-value pairs that represents the hardware platform specific storage deployment requirements. required: false entry_schema: type: string rdma_enabled: type: boolean description: Indicates if the storage support RDMA required: false default: false
tosca.datatypes.nfv.VirtualObjectStorageData Expand source
tosca.datatypes.nfv.VirtualObjectStorageData: derived_from: tosca.datatypes.Root description: VirtualObjectStorageData describes object storage requirements associated with compute resources in a particular VDU properties: max_size_of_storage: type: scalar-unit.size description: Maximum size of virtualized storage resource required: false
tosca.datatypes.nfv.VirtualFileStorageData Expand source
tosca.datatypes.nfv.VirtualFileStorageData: derived_from: tosca.datatypes.Root description: VirtualFileStorageData describes file storage requirements associated with compute resources in a particular VDU properties: size_of_storage: type: scalar-unit.size description: Size of virtualized storage resource required: true file_system_protocol: type: string description: The shared file system protocol (e.g. NFS, CIFS) required: true
tosca.datatypes.nfv.VirtualLinkBitrateLevel Expand source
tosca.datatypes.nfv.VirtualLinkBitrateLevel: derived_from: tosca.datatypes.Root description: Describes bitrate requirements applicable to the virtual link instantiated from a particicular VnfVirtualLink properties: bitrate_requirements: type: tosca.datatypes.nfv.LinkBitrateRequirements description: Virtual link bitrate requirements for an instantiation level or bitrate delta for a scaling step required: true
tosca.datatypes.nfv.VnfOperationAdditionalParameters Expand source
tosca.datatypes.nfv.VnfOperationAdditionalParameters: derived_from: tosca.datatypes.Root description: Is an empty base type for deriving data type for describing VNF-specific parameters to be passed when invoking lifecycle management operations #properties:
tosca.datatypes.nfv.VnfChangeFlavourOperationConfiguration Expand source
tosca.datatypes.nfv.VnfChangeFlavourOperationConfiguration: derived_from: tosca.datatypes.Root description: represents information that affect the invocation of the ChangeVnfFlavour operation #properties:
tosca.datatypes.nfv.VnfChangeExtConnectivityOperationConfiguration Expand source
tosca.datatypes.nfv.VnfChangeExtConnectivityOperationConfiguration: derived_from: tosca.datatypes.Root description: represents information that affect the invocation of the ChangeExtVnfConnectivity operation #properties:
tosca.datatypes.nfv.VnfMonitoringParameter Expand source
tosca.datatypes.nfv.VnfMonitoringParameter: derived_from: tosca.datatypes.Root description: Represents information on virtualised resource related performance metrics applicable to the VNF. properties: name: type: string description: Human readable name of the monitoring parameter required: true performance_metric: type: string description: Identifies the performance metric, according to ETSI GS NFV-IFA 027. required: true constraints: - valid_values: [ v_cpu_usage_mean_vnf, v_cpu_usage_peak_vnf, v_memory_usage_mean_vnf, v_memory_usage_peak_vnf, v_disk_usage_mean_vnf, v_disk_usage_peak_vnf, byte_incoming_vnf_ext_cp, byte_outgoing_vnf_ext_cp, packet_incoming_vnf_ext_cp, packet_outgoing_vnf_ext_cp ] collection_period: type: scalar-unit.time description: Describes the recommended periodicity at which to collect the performance information. required: false constraints: - greater_than: 0 s
tosca.datatypes.nfv.VnfcMonitoringParameter Expand source
tosca.datatypes.nfv.VnfcMonitoringParameter: derived_from: tosca.datatypes.Root description: Represents information on virtualised resource related performance metrics applicable to the VNF. properties: name: type: string description: Human readable name of the monitoring parameter required: true performance_metric: type: string description: Identifies the performance metric, according to ETSI GS NFV-IFA 027. required: true constraints: - valid_values: [ v_cpu_usage_mean_vnf, v_cpu_usage_peak_vnf, v_memory_usage_mean_vnf, v_memory_usage_peak_vnf, v_disk_usage_mean_vnf, v_disk_usage_peak_vnf, byte_incoming_vnf_int_cp, byte_outgoing_vnf_int_cp, packet_incoming_vnf_int_cp, packet_outgoing_vnf_int_cp ] collection_period: type: scalar-unit.time description: Describes the recommended periodicity at which to collect the performance information. required: false constraints: - greater_than: 0 s
tosca.datatypes.nfv.VirtualLinkMonitoringParameter Expand source
tosca.datatypes.nfv.VirtualLinkMonitoringParameter: derived_from: tosca.datatypes.Root description: Represents information on virtualised resource related performance metrics applicable to the VNF. properties: name: type: string description: Human readable name of the monitoring parameter required: true performance_metric: type: string description: Identifies a performance metric derived from those defined in ETSI GS NFV-IFA 027.The packetOutgoingVirtualLink and packetIncomingVirtualLink metrics shall be obtained by aggregation the PacketOutgoing and PacketIncoming measurements defined in clause 7.1 of GS NFV-IFA 027 of all virtual link ports attached to the virtual link to which the metrics apply. required: true constraints: - valid_values: [ packet_outgoing_virtual_link, packet_incoming_virtual_link ] collection_period: type: scalar-unit.time description: Describes the recommended periodicity at which to collect the performance information. required: false constraints: - greater_than: 0 s
tosca.datatypes.nfv.InterfaceDetails Expand source
tosca.datatypes.nfv.InterfaceDetails: derived_from: tosca.datatypes.Root description: information used to access an interface exposed by a VNF properties: uri_components: type: tosca.datatypes.nfv.UriComponents description: Provides components to build a Uniform Ressource Identifier (URI) where to access the interface end point. required: false interface_specific_data: type: map description: Provides additional details that are specific to the type of interface considered. required: false entry_schema: type: string
tosca.datatypes.nfv.UriComponents Expand source
tosca.datatypes.nfv.UriComponents: derived_from: tosca.datatypes.Root description: information used to build a URI that complies with IETF RFC 3986 [8]. properties: scheme: type: string # shall comply with IETF RFC3986 description: scheme component of a URI. required: true authority: type: tosca.datatypes.nfv.UriAuthority description: Authority component of a URI required: false path: type: string # shall comply with IETF RFC 3986 description: path component of a URI. required: false query: type: string # shall comply with IETF RFC 3986 description: query component of a URI. required: false fragment: type: string # shall comply with IETF RFC 3986 description: fragment component of a URI. required: false
tosca.datatypes.nfv.UriAuthority Expand source
tosca.datatypes.nfv.UriAuthority: derived_from: tosca.datatypes.Root description: information that corresponds to the authority component of a URI as specified in IETF RFC 3986 [8] properties: user_info: type: string # shall comply with IETF RFC 3986 description: user_info field of the authority component of a URI required: false host: type: string # shall comply with IETF RFC 3986 description: host field of the authority component of a URI required: false port: type: string # shall comply with IETF RFC 3986 description: port field of the authority component of a URI required: false
tosca.datatypes.nfv.VnfProfile Expand source
tosca.datatypes.nfv.VnfProfile: derived_from: tosca.datatypes.Root description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF. properties: instantiation_level: type: string description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used. required: false min_number_of_instances: type: integer description: Minimum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. required: true constraints: - greater_or_equal: 0 max_number_of_instances: type: integer description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. required: true constraints: - greater_or_equal: 0
tosca.datatypes.nfv.injectFile Expand source
tosca.datatypes.nfv.injectFile: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1 derived_from: tosca.datatypes.Root properties: source_path: type: string required: true dest_path: type:string required: true
- No labels