Steps to build the RAN-Sim Controller setup:
Clone and Checkout Ran-Sim Controller
git clone "https://gerrit.onap.org/r/integration/simulators/ran-simulator"
- Copy ‘settings.xml’ from ‘<YOURFOLDER>/ran-simulator/ransim/ransimctrlr/packages/base/src/files/m2/settings.xml’ to <HOME>/.m2/ folder as settings.xml file after updating environment specific configurations.
If the file already exists in <HOME>/.m2/ folder, then merge this file content into the existing file appropriately.
Note: settings.xml entries are mandatory to include dependencies.
3. Open the terminal and navigate to the '<YOURFOLDER>/ran-simulator/ransim'
4. Run the following command in the terminal
mvn clean install -P docker
5. After successful build navigate to '<YOURFOLDER>/ran-simulator/ransim/docker' directory
6. The SDNR details can be updated in the file '<YOURFOLDER>/ran-simulator/ransim/docker/docker-compose.yml'.
environment:
- SDNR_IP={SDNR IP address}
- SDNR_PORT={SDNR port number}
- SDNR_USER={SDNR user ID}
- SDNR_PASSWORD={SDNR user password}
7. Run the 'docker-compose up -d' command in the terminal( Note: Use docker compose version 1.6.0 or above)
8. Once the ransim and mariadb containers are started, you can see logs in the ransim container under the folder /opt/app/policy/servers/ransim/logs
Steps to check the RAN-Sim Controller logs
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Navigate to '/opt/app/policy/servers/ransim/logs' using the cd command.
4. Execute the following command to check the logs:
'tail -f ransim-rest.log'
Steps to access the tables in mysql and check table contents
- Enter the following commands in console to accessmysql:
'mysql -uroot -psecret'
'use ransim_db'
2. Type 'show tables;' to check the and access the tables.
Steps to start/stop RAN network slice simulation
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command tostart the RAN network slice simulation:
curl -k -X POST --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StartRanSliceSimulation'
4. Run the following command tostop the RAN network slice simulation:
curl -k -X DELETE --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StopRanSliceSimulation'
Steps to start/stop generating Intelligent slicing PM data
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command to start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/GenerateIntelligentSlicingPmData -i
4. Run the following commandto Start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/stopIntelligentSlicingPmData -i
5. You can see the generated slicing pm data files in the ransim container under the folder /tmp/ransim-install.
Steps to build the RAN-Sim Controller setup:
Clone and Checkout Ran-Sim Controller
git clone "https://gerrit.onap.org/r/integration/simulators/ran-simulator"
You can download below patchset for refactored and enhanced RAN-simulator code for setup, the code is in review stage will be merged soon.
- Copy ‘settings.xml’ from ‘<YOURFOLDER>/ran-simulator/ransim/ransimctrlr/packages/base/src/files/m2/settings.xml’ to <HOME>/.m2/ folder as settings.xml file after updating environment specific configurations.
If the file already exists in <HOME>/.m2/ folder, then merge this file content into the existing file appropriately.
Note: settings.xml entries are mandatory to include dependencies.
3. Open the terminal and navigate to the '<YOURFOLDER>/ran-simulator/ransim'
4. Run the following command in the terminal
mvn clean install -P docker
5. After successful build navigate to '<YOURFOLDER>/ran-simulator/ransim/docker' directory
6. The SDNR details can be updated in the file '<YOURFOLDER>/ran-simulator/ransim/docker/docker-compose.yml'.
environment:
- SDNR_IP={SDNR IP address}
- SDNR_PORT={SDNR port number}
- SDNR_USER={SDNR user ID}
- SDNR_PASSWORD={SDNR user password}
7. Run the 'docker-compose up -d' command in the terminal( Note: Use docker compose version 1.6.0 or above)
8. Once the ransim and mariadb containers are started, you can see logs in the ransim container under the folder /opt/app/policy/servers/ransim/logs
Steps to check the RAN-Sim Controller logs
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Navigate to '/opt/app/policy/servers/ransim/logs' using the cd command.
4. Execute the following command to check the logs:
'tail -f ransim-rest.log'
Steps to access the tables in mysql and check table contents
- Enter the following commands in console to accessmysql:
'mysql -uroot -psecret'
'use ransim_db'
2. Type 'show tables;' to check the and access the tables.
Steps to start/stop RAN network slice simulation
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command tostart the RAN network slice simulation:
curl -k -X POST --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StartRanSliceSimulation'
4. Run the following command tostop the RAN network slice simulation:
curl -k -X POST --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StopRanSliceSimulation'
Steps to start/stop generating Intelligent slicing PM data
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command to start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/GenerateIntelligentSlicingPmData -i
4. Run the following commandto Start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/stopIntelligentSlicingPmData -i
5. You can see the generated slicing pm data files in the ransim container under the folder /tmp/ransim-install.
Steps to build the RAN-Sim Controller setup:
Clone and Checkout Ran-Sim Controller
git clone "https://gerrit.onap.org/r/integration/simulators/ran-simulator"
- Copy ‘settings.xml’ from ‘<YOURFOLDER>/ran-simulator/ransim/ransimctrlr/packages/base/src/files/m2/settings.xml’ to <HOME>/.m2/ folder as settings.xml file after updating environment specific configurations.
If the file already exists in <HOME>/.m2/ folder, then merge this file content into the existing file appropriately.
Note: settings.xml entries are mandatory to include dependencies.
3. Open the terminal and navigate to the '<YOURFOLDER>/ran-simulator/ransim'
4. Run the following command in the terminal
mvn clean install -P docker
5. After successful build navigate to '<YOURFOLDER>/ran-simulator/ransim/docker' directory
6. The SDNR details can be updated in the file '<YOURFOLDER>/ran-simulator/ransim/docker/docker-compose.yml'.
environment:
- SDNR_IP={SDNR IP address}
- SDNR_PORT={SDNR port number}
- SDNR_USER={SDNR user ID}
- SDNR_PASSWORD={SDNR user password}
7. Run the 'docker-compose up -d' command in the terminal( Note: Use docker compose version 1.6.0 or above)
8. Once the ransim and mariadb containers are started, you can see logs in the ransim container under the folder /opt/app/policy/servers/ransim/logs
Steps to check the RAN-Sim Controller logs
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Navigate to '/opt/app/policy/servers/ransim/logs' using the cd command.
4. Execute the following command to check the logs:
'tail -f ransim-rest.log'
Steps to access the tables in mysql and check table contents
- Enter the following commands in console to accessmysql:
'mysql -uroot -psecret'
'use ransim_db'
2. Type 'show tables;' to check the and access the tables.
Steps to start/stop RAN network slice simulation
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command tostart the RAN network slice simulation:
curl -k -X POST --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StartRanSliceSimulation'
4. Run the following command tostop the RAN network slice simulation:
curl -k -X POST --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StopRanSliceSimulation'
Steps to start/stop generating Intelligent slicing PM data
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command to start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/GenerateIntelligentSlicingPmData -i
4. Run the following commandto Start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/stopIntelligentSlicingPmData -i
5. You can see the generated slicing pm data files in the ransim container under the folder /tmp/ransim-install.
Steps to build the RAN-Sim Controller setup:
Clone and Checkout Ran-Sim Controller
git clone "https://gerrit.onap.org/r/integration/simulators/ran-simulator"
You can download below patchset for refactored and enhanced RAN-simulator code for setup, the code is in review stage will be merged soon.
- Copy ‘settings.xml’ from ‘<YOURFOLDER>/ran-simulator/ransim/ransimctrlr/packages/base/src/files/m2/settings.xml’ to <HOME>/.m2/ folder as settings.xml file after updating environment specific configurations.
If the file already exists in <HOME>/.m2/ folder, then merge this file content into the existing file appropriately.
Note: settings.xml entries are mandatory to include dependencies.
3. Open the terminal and navigate to the '<YOURFOLDER>/ran-simulator/ransim'
4. Run the following command in the terminal
mvn clean install -P docker
5. After successful build navigate to '<YOURFOLDER>/ran-simulator/ransim/docker' directory
6. The SDNR details can be updated in the file '<YOURFOLDER>/ran-simulator/ransim/docker/docker-compose.yml'.
environment:
- SDNR_IP={SDNR IP address}
- SDNR_PORT={SDNR port number}
- SDNR_USER={SDNR user ID}
- SDNR_PASSWORD={SDNR user password}
7. Run the 'docker-compose up -d' command in the terminal( Note: Use docker compose version 1.6.0 or above)
8. Once the ransim and mariadb containers are started, you can see logs in the ransim container under the folder /opt/app/policy/servers/ransim/logs
Steps to check the RAN-Sim Controller logs
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Navigate to '/opt/app/policy/servers/ransim/logs' using the cd command.
4. Execute the following command to check the logs:
'tail -f ransim-rest.log'
Steps to access the tables in mysql and check table contents
- Enter the following commands in console to accessmysql:
'mysql -uroot -psecret'
'use ransim_db'
2. Type 'show tables;' to check the and access the tables.
Steps to start/stop RAN network slice simulation
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command tostart the RAN network slice simulation:
curl -k -X POST --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StartRanSliceSimulation'
4. Run the following command tostop the RAN network slice simulation:
curl -k -X POST --header 'Content-Type: application/json' --header 'Accept: */*' 'http://localhost:8081/ransim/api/StopRanSliceSimulation'
Steps to start/stop generating Intelligent slicing PM data
- Open the console and enter the following command:
'docker ps'
2. Once the container details is displayed enter the following command:
'docker exec -it ransim bash'
3. Run the following command to start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/GenerateIntelligentSlicingPmData -i
4. Run the following commandto Start generate Intelligent slicing PM data:
curl -X POST -H "Content-Type: text/plain" http://localhost:8081/ransim/api/stopIntelligentSlicingPmData -i
5. You can see the generated slicing pm data files in the ransim container under the folder /tmp/ransim-install.
46 Comments
Yukihiro Kishimoto
>Clone and Checkout Ran-Sim Controller
Hi Deepika S
I would love to try this use case.
Please tell me the repository to get RAN-SimC.
Yukihiro Kishimoto
Deepika S
Hi Yukihiro Kishimoto
I will update the repository link in the wiki once the enhanced RAN-sim code is committed.
Deepika
Aniello Paolo Malinconico
Hi Deepika S
Still no link to clone the simulator?
Deepika S
Hi Aniello Paolo Malinconico Yukihiro Kishimoto
I have updated the repo link
Abhimanyu Garg
Hi Deepika S,
RanSim is running but the devices are not being synchronized with SDN-R.
Could you suggest anything need to addon?
Thanks,
Ahila P
Hi Abhimanyu Garg,
Please make sure that the netconf servers (Honeycomb) is running, mention the SDN-R IP & Port in ransim's docker compose file, ensure that the certs are in place (ransim/docker/config/ransim)
If the above said points re taken care, please check the ransim log at /opt/app/policy/servers/ransim/logs/ransim-rest.log and share the details.
Abhimanyu Garg
Hi Ahila P,
Thanks for the reply.
Q1: Is (Honeycomb)netconf server is mandatory to run?
Q2: Do we need to deploy (honeycomb)netconf? or is it part of this current "repo-- https://gerrit.onap.org/r/integration/simulators/ran-simulator"?
Q3: do you means to these certs - policy-keystore, jssecacerts ? which are already the part of project?
Thanks,
Abhimanyu Garg
a) Log while start the "docker-compose up -d"
b) While execute the "RAN network slice simulation"
curl
-
k
-
X POST
-
-
header
'Content-Type: application/json'
-
-
header
'Accept: */*'
'http://localhost:8081/ransim/api/StartRanSliceSimulation'
c)Logs after run the RAN
Ahila P
Hi Abhimanyu Garg,
Honeycomb servers should be running to interact with SDN-R. We will share the Honeycomb setup details shortly.
Abhimanyu Garg
Hi Ahila P
Sure, Thank you for your support.
Abhimanyu Garg
Hi Ahila P,
Waiting for the Honeycomb setup details.
Thanks
Ahila P
Hi Abhimanyu Garg,
Honeycomb code is committed and the details are updated in Install Minimum Scope for Option 1 - section 9.
Thanks,
Ahila P.
Abhimanyu Garg
Hi Ahila P,
Thank you, it worked and RANsim devices has mounted with SDNR by hitting the API.
Could you tell any other configuration need to take care?
Thanks
Ahila P
Hi Abhimanyu Garg,
1→ follow this order
a) bring up the ransim container ( using docker-compose)
b) follow the steps under the section Steps to start/stop RAN network slice simulation
c) Bring up the honeycomb containers (once the honeycomb server are up, it sends mount requests to SDN-R periodically)
2→ Do not make changes in the same docker-compose file. copy the docker folder as many servers you need ( 12 servers for slicing usecase). Each docker-compose file is modified to change the port and it denotes a different netconf server.
Thanks,
Ahila P.
Abhimanyu Garg
Hi Ahila P
Thank you for the support.
1 - Yes I followed the same as you defined.
2 - Yes, I copied the "hc" directory 12 time and renamed it.
3 - In docker-compose.yml update the port.
- "2831:2831"
- "2832:2831"
Only make changes in docker-compose.yml did not work. The periodic ping is not getting start.
4. I make the changes as well in this ---- /hc/config/gnbsim.json
The periodic ping get started
||Sent ping message to Client ipPort:172.30.156.14:2832
5. Receiving following exception while starting the Honeycomb server.
2021-04-26T08:34:53{GMT+0}+00:00|||http-nio-8081-exec-3||||INFO|||||org.onap.ransim.rest.client.RestClient.sendMountRequestToSdnr(RestClient.java:222)||Key:Content-Type , Value:[application/xml]
2021-04-26T08:34:53{GMT+0}+00:00|||http-nio-8081-exec-3||||INFO|||||org.onap.ransim.rest.client.RestClient.sendMountRequestToSdnr(RestClient.java:222)||Key:Accept , Value:[application/xml]
2021-04-26T08:34:54{GMT+0}+00:00|||http-nio-8081-exec-3||||ERROR|||||org.onap.ransim.rest.client.RestClient.sendMountRequestToSdnr(RestClient.java:241)||Exc in post {}
org.springframework.web.client.HttpClientErrorException$Unauthorized: 401 Unauthorized: [no body]
at org.springframework.web.client.HttpClientErrorException.create(HttpClientErrorException.java:105)
at org.springframework.web.client.DefaultResponseErrorHandler.handleError(DefaultResponseErrorHandler.java:170)
at org.springframework.web.client.DefaultResponseErrorHandler.handleError(DefaultResponseErrorHandler.java:112)
at org.springframework.web.client.ResponseErrorHandler.handleError(ResponseErrorHandler.java:63)
at org.springframework.web.client.RestTemplate.handleResponse(RestTemplate.java:785)
at org.springframework.web.client.RestTemplate.doExecute(RestTemplate.java:743)
at org.springframework.web.client.RestTemplate.execute(RestTemplate.java:677)
at org.springframework.web.client.RestTemplate.exchange(RestTemplate.java:586)
at org.onap.ransim.rest.client.RestClient.sendMountRequestToSdnr(RestClient.java:229)
6. RANsim-Mariadb get updated with IP and Port, but In SDNR device is not Mounting.
7. The device get Mount after hit the API - https://<172.xx.xx.xx>:<PORT>/restconf/config/network-topology:network-topology/topology/topology-netconf/node/ncserver4
and core model and type is appearing unknow?
Could you suggest something?
Thanks
Ahila P
Hi Abhimanyu Garg,
As it is related to authorization, copying the jssecacerts certificates from SDN-R container to ransim's docker folder: ran-simulator/ransim/docker/config/ransim may help.
Thanks,
Ahila P.
Abhimanyu Garg
Hi Ahila P,
As I already downloaded the certs from browser SDNR(ODLUX GUI) and import into jssecacerts using "keytool -importcert -file" .
Still facing the same issue.
Thanks
Yukihiro Kishimoto
Hi Ahila P, Abhimanyu Garg
I have a same problem. Could you kindly show me which is the right jssecacerts on the sdnc-web?
../opt/app/osaaf/local/org.onap.sdnc.trust.jks
../opt/app/osaaf/local/org.onap.sdnc.jks
../opt/app/osaaf/local/truststoreONAPall.jks
Ahila P
Hi Abhimanyu Garg,
Can you verify once whether the username and password matches as mentioned here : gerrit.onap Code Review - integration/simulators/ran-simulator.git/blob - ransim/docker/docker-compose.yml
Thanks,
Ahila P.
Abhimanyu Garg
Hi Ahila P
Thank you, yes its working.
Thanks,
Aniello Paolo Malinconico
Hi Abhimanyu Garg, how you fixed the issue?
I am getting a similar error regarding certificates from RAN catalina.out log file:
Abhimanyu Garg
Hi Aniello Paolo Malinconico
1.Download the SDNR cacerts from browser.
2.Import the cacerts into RANsim
keytool -import -noprompt -trustcacerts -alias SNDC -file <certsfile> -keystore /ransim/docker/config/ransim/jssecacerts -storepass changeit
Thanks
Aniello Paolo Malinconico
Hi Abhimanyu Garg, where exactly can I download these certs from SDNR (ODLUX) at https://xx.xx.xx.xx:30205/odlux/index.html#/login
I havent found any section in order to download these certs.
Thanks,
Aniello
Abhimanyu Garg
Hi Aniello Paolo Malinconico
Thanks
Aniello Paolo Malinconico
Thank u so much.
murali partha
Hi Abhimanyu Garg
I'm following the build procedure as mentioned by you.
do we also need to change "netconf-ssh-binding-port": 2831" under hcsim-content/gnbsim/hc1/config/netconf.json for each HoneyComb build
Abhimanyu Garg
Hi,
No need to change the binding port, as this port number will be used by simulated device.
And only once the HoneyComb need to build.
Thanks
murali partha
Hi Ahila P ,
when we run the Stop RAN network Slice Simulation. It throws below error,
curl
-
k
-
X POST
-
-
header
'Content-Type: application/json'
-
-
header
'Accept: */*'
'http://localhost:8081/ransim/api/StopRanSliceSimulation'
Is it Deprecated now, POST for Stopping.
Abhimanyu Garg
Hi,
Use delete method.
Thanks
murali partha
Thanks Abhimanyu Garg
murali partha
Hi Abhimanyu Garg
1) Where do we find the procedure to generate PM data in ran sim controller.
2) How do we convert xml to a URN while performing ietf-netconf edit-config operation.
if you could direct us to some resource, it would be helpful.
Thanks
Abhimanyu Garg
Hi,
You can check at following link
Core & RAN Simulators
Thanks
Rajeev chaudhary
Hi Abhimanyu Garg
Ransim is running fine with mvn clean install -P docker command but when i try to up the docker compose ,the ransim exited with code2
could you suggest something to try to run ransim container ?
Thanks
Abhimanyu Garg
Hi Rajeev chaudhary,
Make sure your RANsim mvn clean install executed successfully.
if yes then could you share more info or check the docker-compose logs
Thanks
Rajeev chaudhary
Thanks
Abhi.
Vishal Varvate
Hi Ahila P,
Can you please confirm on whether the current RANSimulator implementation comply with 3GPP TS 28.541 or not ?
Swaminathan Seetharaman
This is a very generic and ambiguous question. TS 28.541 has several aspects in it w.r.to the RAN. Which specific aspects are you interested in (e.g., Network Slicing alone)? Also, which release/version of TS 28.541 are you looking at?
Vishal Varvate
Hi,
The release is 3GPP TS 28.541 V17.1.0 (2020-12) and aspects we are looking for is Network Slicing alone.
Swaminathan Seetharaman
1 basic question: When asking about RAN-Sim's compliance to TS 28.541 for Slicing, can you pl. clarify which specific aspects are you looking at? I am asking this because, many of the slice-related attributes specified in TS 28.541 cannot be directly sent as-is (or) are not relevant for RAN-Sim.
ONAP implementation of Network Slicing
In general, we are referring to Rel. 16 of 3GPP specs only at present for Network Slicing implementation in ONAP. Even in Rel.16 there are some aspects which aren't yet considered/implemented in ONAP.
When Rel. 17 is stable, we will consider it for possible alignment. So this also applies to TS 28.541.
FYI, there are quite some changes in TS 28.541 Rel. 17 w.r.to Slicing info models (e.g., Transport EP, Slice Profile, etc.), and there are still many open points in the specs which require to be addressed first.
Abhimanyu Garg
Hi Swaminathan Seetharaman
Can we validate the communication(fronthual, midhaul, backhual), configuration, UE integration aspect between RU-DU and CU?
Thanks
Abhimanyu Garg
Hi Ahila P,
Can you guide on the following error ?
[WebSocketSimpleContainer@1449426109-22] ERROR com.wipro.www.ConfigurationHandler - Exception occurred while parsing Unrecognized field "serverId" (class com.wipro.www.websocket.models.NearRTRIC), not marked as ignorable (7 known properties: "locationName", "nearRTRICgNBId", "managedBy", "idNearRTRIC", "GNBCUUPFunction", "GNBDUFunction", "attributes"])
Thanks
Goutam Roy
Hi All,
How can I integrate RAN-SIM with ONAP VES-Collector(DCAE)?
With Regards
Goutam Roy.
Niranjana Y
Hi Goutam Roy,
Did you mean netconf server? RAN-Sim doesn't directly connect with VES. Please do send the error logs
Kamlesh Kumar
Hi Niranjana Y ,@all
I have integrated RAN-Sim master with SDNR and DCAE
RAN-SIM to DCAE looks fine and I am getting CM/PM notification in DCAE.
But I am getting Exception in SDNR and Honeycomb logs after it is mounted on SDNR
Note: We are using enodeB and I have used below URL for ran-sim controller and Honeycomb
Installation & setup of the RAN-Simulator and PCI-Handler micro-service
Honeycomb Logs
=============
SDNR Logs:
======================
Please find SDNR karaf logs
amol jadhav
Hi All,
I have done the setup for ransim and gnodebsim with all 12 cu du nearrtic, and it is mounted to SDNR as well, and i can see the configuration also all of them.
But my question is when we use oofpcipoc model we have cells displayed in ransim UI.
But now we are using ran-network yang model, I am not able to see anything in ransim UI, it is bank no cells and nothing over there.
So is it correct only or do i have to load any specific file for simulation?
Plz help
avinash sarraff
After executing command mvn clean install -P docker, the build is getting stuck at below line. Any idea or help ?
[INFO] DOCKER> Executing: /tmp/apt-key-gpghome.kierdlwEK1/gpg.1.sh --recv-keys --keyserver hkp://keyserver.ubuntu.com:80 0xF1656F24C74CD1D8