This page mainly describes the template design steps of option2 for the E2E Network Slicing use case for Istanbul release.
Template design for Option1 can be found in below link:
Template design for Option2 is as follows:
Gliffy Diagram | ||||||||
---|---|---|---|---|---|---|---|---|
|
...
Login SDC HOME page with Admin Role,create the following categories:
CST,ServiceProfile,AN SliceProfile,AN CST,ServiceProfile,AN NF Slice Profile, CN SliceProfile,TN SliceProfile,NST, TN BH NSST, TN MH NSST, TN FH NSST, TN Network Requirement,AN NF NSST,CN NSST, AN NSST.
1.
...
Create TN_Network_Req_T
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'CN_NSSTTN_Network_Req_T' as the name to indicate the meaning of the service.
- Select ‘CN NSSTTN Network Requirement’ as Category.
- Provide 'ONAP_internal' as Service Role
2. NSST should be composed of network service(NS). For NS helm artifacts, CBA package and other design time activities, please follow below link:
https://wiki.onap.org/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS
3. In Composition section, drag the elements of ‘Fiveg’(NS) from the Elements palette to the service canvas.
4. In Properties Assignment section,define Service properties.
a. Click
c. Set property values as shown bellow.
2.Create TN_Network_Req_T
In Properties Assignment section, define the following service properties.
3. Distribute the service model and check the results.
2.Create TN_Network_Req_AR_BH(Allotted Resource)
Login SDC HOME page with Designer Role , add new serviceand add VF.
1. In the General section, complete all required fields.
- Suggest 'TN_Network_Req_AR_
...
- BH' as the name to indicate the meaning of the service.
- Select
...
- ‘Allotted Resource’ as Category.
- Provide 'ONAP
...
- ' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Properties Assignment section, define the following service properties.
Composition section,search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
3. Distribute the service model and check the results.
3.CreateTN_Network_Req_
...
AR_FH(Allotted Resource)
Login SDC HOME page with Designer Role and add VF.
...
- Suggest 'TN_Network_Req_AR_FH' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor Release.
...
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
4.
...
Create TN_Network_Req_AR_MH(Allotted Resource)
Login SDC HOME page with Designer Role , add new serviceand add VF.
1. In the General section, complete all required fields.
- Suggest 'TN_
...
- Network_Req_AR_MH' as the name to indicate the meaning of the service.
- Select
...
- ‘Allotted Resource’ as Category.
- Provide 'ONAP
...
- ' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Composition section,search 'TN_Network_Req_ARAllotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define the following service efine Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
4. Distribute the service model and check the results.
5.Create
...
CN_NSST
Login SDC HOME page with Designer Role and add VF, add new service.
1. In the General section, complete all required fields.
- Suggest '
...
- CN_
...
- NSST' as the name to indicate the meaning of the service.
- Select
...
- ‘CN NSST’ as Category.
- Provide 'ONAP_internal' as
...
- Service Role
2. NSST should be composed of network service(NS). For NS helm artifacts, CBA package and other design time activities, please follow below link:
https://wiki.onap.org/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS
3. In Composition section, drag the elements of ‘Fiveg’(NS) 2. In Composition section,search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
34. In Properties Assignment section,define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
6.Create TN_MH_AR(Allotted Resource)
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'TN_MH_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Composition section,search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
...
Click
c. Set property values as shown bellow.
6.Create TN_BH_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'TN_MHBH_NSST' as the name to indicate the meaning of the service.
- Select ‘TN MH BH NSST’ as Category.
- Provide 'TRANSPORT' as Service Type.Provide 'TN_MHONAP_internal' as Service Role.
2. In Composition section,search 'TN_Network_MHReq_AR', drag the element from the Elements palette to the service canvas.
...
3.In Properties Assignment section, define the following service properties.
4. Distribute the service model and check the results.
7.Create TN_
...
MH_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'TN_FHMH_NSST' as the name to indicate the meaning of the service.
- Select ‘TN FH MH NSST’ as Category.
- Provide 'TRANSPORT' as Service Type.
- Provide 'TN_FHMH' as Service Role.
2. In Composition section,search 'TN_FHMH_AR', drag the element from the Elements palette to the service canvas.
...
8.Create
...
TN_FH_
...
NSST
Login SDC HOME page with Designer Role, add new VFservice.In
1. In the General section, complete all required fields.
- Suggest '
...
- TN_FH_
...
- NSST' as the name to indicate the meaning of the service.
- Select ‘
...
- TN FH NSST’ as Category.
- Provide '
...
- TRANSPORT' as
...
- Service Type.
- Provide '
...
- TN_FH' as
...
- Service Role.
2. In Composition section,search 'ExtCP2' from Generic CategoryTN_FH_AR', drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_E2'.
...
9.Create NrtRIC_resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
- Suggest 'CUCPNrtRIC_Resourceresource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '5G RAN' as Vendor Name.
- Provide '1' as Vendor Release.
...
2. In Composition section,search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
...
'ExtCP2'
...
from Generic Category
...
, drag the element from the Elements palette to the service canvas.
- Rename another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1CE2'.
...
10.
...
Create CUCP_Resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
- Suggest 'CUUPCUCP_Resource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '5G RAN' as Vendor Name
- Provide '1' as Vendor Release
2. In Composition section,search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_NG_uc'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1UF1C'.
...
11.
...
Create CUUP_Resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
- Suggest 'DUCUUP_Resource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '5G RAN' as Vendor Name
- Provide '1' as Vendor Release
2. In Composition section,search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_E2NG_u'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FHE1'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1CE2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.
...
12.
...
Create DU_Resource
Login SDC HOME page with Designer Role, add new serviceVF.
...
In the General section, complete all required fields.
- Suggest 'DU_Resource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '
...
- 5G RAN' as Vendor Name
- Provide '1' as Vendor Release
2. In Composition section,search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_E2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FH'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.
13.Create RAN_NF NSST
...
2. In Composition section,drag the elements of ‘NrtRIC_resource’,‘CUCP_Resource’,‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
...
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'TESTRANTOPNSSTRAN_NF_NSST' as the name to indicate the meaning of the service.
- Select ‘AN NF NSST’ as Category.
- Provide Provide 'RAN' as Service Type.
- Provide
'AN_NF''ONAP_internal' as Service Role.
2. In Composition section,drag the elements of ‘RAN‘NrtRIC_NFresource’,‘CUCP_NSST’,‘TN_MH_NSST’,‘TN_FH_NSST’ Resource’,‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
...
a. Click 'AllottedResource 0' in the right pane
b. Use the value of RAN_NSST RAN_NF_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
...
2. In Composition section,drag the elements of ‘AN_AR’,‘Tn_BH_AR’,,‘Tn_FH_AR’,,‘Tn_MH_AR’,‘CN_AR’ from the Elements palette to the service canvas.
...
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
Create SliceProfile_AN_O1 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'SliceProfile_AN_O1' as the name to indicate the meaning of the service.
- Select ‘AN SliceProfile’ as Category.
_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results2. In Composition section,drag the elements of ‘SliceProfile_AN_NF_O1’,‘TN_SliceProfile’ from the Elements palette to the service canvas.
24.Create ServiceProfile_O2 Service Template
...
2. In Composition section,search 'Slice_AR', ’SliceProfile_CN‘,‘SliceProfile_AN_O1’,‘SliceProfile_AN_NF_O2’,‘SliceProfile_TN’,drag the element from the Elements palette to the service canvas.
...
Code Block | ||||
---|---|---|---|---|
| ||||
curl --user AAI:AAI -X PUT -H "X-FromAppId:AAI" -H "X-TransactionId:get_aai_subscr" -H "Accept:application/json" -H "Content-Type:application/json" -k "https://{worker-vm-ip}:30233/aai/v21/service-design-and-creation/models/model/bfd35bbf-4469-44d2-aa13-eb531b2d4e7a" -d '{ "model-invariant-id": "bfd35bbf-4469-44d2-aa13-eb531b2d4e7a", "model-type": "Service", "model-vers": { "model-ver": [ { "model-version-id": "fd4ca61e-2147-4693-ad2c-2786889b51a5", "model-name": "NSTO1NSTO2", "model-version": "1.0" } ] } }' |
...