Table of Contents |
---|
Note |
---|
Hint: This page refers to "Casablanca". For Dublin/El Alto goto here: SDN-R with OOM Rancher/Kubernetes Installation |
Introduction
This page discusses the process to install SDNR/SDNC into the ONAP installation at OWL (ONAP Open Wireless Laboratory) in WINLAB at Rutgers University. The ONAP installation itself OWL/WINLAB laboratory environment is described in the wiki page ONAP Open Wireless Laboratory (OWL) at Wireless Information Network Laboratory (WINLAB). This page describes how to install a development Docker image of SDNC into ONAP rather than the default image taken from the nexus3.onap.org:10001 repository.
...
Given the close deadline for the proof-of-concept, we have decided to develop our code in a github site that is outside of the ONAP gerrit (there is a description at this wiki page). The starting point for the code will be a branch of the ONAP gerrit, and we will fully conform with ONAP practices with the intention of submitting the code to the ONAP gerrit after the proof-of-concept. We have agreed to install the karaf features into CCSDK and then create a SDNC docker image from that CCSDK image. This is in accord approach accords with the policy of keeping features in CCSDK and will help us better leverage the work of the OOM group because their Helm charts install SDNC and not CCSDK. We have also agreed to use the Casablanca branch of both CCSDK and SDNC rather than the master branch because the master branch has been updated to evolve into Dublin and Casablaca will be a stable environment as we work on the proof-of-concept.
...
Code Block |
---|
<parent>$ <groupId>org.onap.ccsdk.parent</groupId>$ <artifactId>single-feature-parent</artifactId>$ <version>1.1.2-SNAPSHOT<2</version>$ <relativePath/>$ </parent>$ <parent>$ <groupId>org.onap.ccsdk.parent</groupId>$ <artifactId>feature-repo-parent</artifactId>$ <version>1.1.2-SNAPSHOT<2</version>$ <relativePath/>$ </parent>$ <parent>$ <groupId>org.onap.ccsdk.parent</groupId>$ <artifactId>odlparent-lite</artifactId>$ <version>1.1.2-SNAPSHOT<2</version>$ <relativePath/>$ </parent>$ <parent>$ <groupId>org.onap.ccsdk.parent</groupId>$ <artifactId>binding-parent</artifactId>$ <version>1.1.2-SNAPSHOT<2</version>$ <relativePath/>$ </parent>$ <groupId>org.onap.ccsdk.distribution</groupId> <artifactId>distribution-odlsli</artifactId> <version>0.3.2-SNAPSHOT<2</version> <packaging>pom</packaging> |
The Dockerfile in ccsdk/distribution/odlsli/src/main/docker that creates the CCSDK Docker images needs to be updated with the correct tag for the OpenDaylight Oxygen image.
Change:
Code Block |
---|
# Base ubuntu with added packages needed for open ecomp FROM onap/ccsdk-odl-oxygen-image:${project.version} |
...
Notice that the version number for the Casablanca branch of SDNC is 1.4.2-SNAPSHOT, which differs from the version for CCSDK: 0.3.2-SNAPSHOT. Also, it specifies a property for the tag of the CCSDK Docker image as "0.3-STAGING-latest." The file sdnc/oam/installation/sdnc/installation/sdnc/src/main/docker/Dockerfile shows:
...
Code Block |
---|
# Base ubuntu with added packages needed for open ecomp
# FROM onap/ccsdk-odlsli-image:${ccsdk.docker.version}
FROM oof-pci/ccsdk-odlsli-image:0.3.2-SNAPSHOT
... |
With that single change, one can navigate to sdnc/oam/installation/sdnc and execute the command "mvn clean install -P docker" to create the custom SDNC image. One now has these images.
...
We now have a development SDNC Docker image, and we want to install it into ONAP at OWL. We are using the OOM Rancher/Kubernetes approach to installing ONAP, and their scripts pull all of the Docker images from the nexus3.onap.org repository. To pull down our development image, we must first push it to a Docker repository, but we cannot push it to nexus3 because of access restrictions. Instead, we use a separate repository in the public Docker hub repository (please please contact me for access). The next step is to push the new image to that Docker hub. Below, we first rename the image to something meaningful to the proof-of-concept and then push it.
Code Block |
---|
% docker login --username <docker-hub-username> % docker tag onap/sdnc-image:1.4.2-SNAPSHOT <docker-hub-username>/oof-pci-sdnr:1.4.2-SNAPSHOT % docker push <docker-hub-username>/oof-pci-sdnr:1.4.2-SNAPSHOT The push refers to repository [docker.io/<docker-hub-username>/oof-pci-sdnr] 03e7ad007451: Pushed a0a1cf35dfbe: Pushed a07a5ef548f3: Pushed 00f72359482f: Pushed e8bd422087d4: Pushed e2049f74dbc7: Pushed a6be3b814740: Pushed 2aee35f4b0cf: Pushed cdfcf3c88e0c: Pushed 079c4c5e0c3b: Pushed c4645863df89: Pushed c931e6de9fae: Pushed dda32bf9f38e: Pushed a9d2e609edd2: Pushed 7f1e7f156f10: Pushed fd502652d1b6: Pushed 1be2b014d5b5: Pushed 95002f737271: Pushed daf5c98fd708: Pushed 6ddb554c87b4: Pushed 095019da6309: Pushed 6aaca5663342: Pushed 493565e7bfc4: Pushed a211906d4a22: Pushed 5d3087e4738c: Pushed 2940f1099458: Pushed f17a07942400: Pushed 93c6b053ea3a: Layer already exists ba2b9e9c0ba4: Layer already exists 2ee1b8bcd8b9: Layer already exists 8814cf621812: Layer already exists f332a5c37505: Layer already exists f1dfa8049aa6: Layer already exists 79109c0f8a0b: Layer already exists 33db8ccd260b: Layer already exists b8c891f0ffec: Layer already exists 1.4.2-SNAPSHOT: digest: sha256:381f062e441ae3ea32413f002a6cac83161d8280edcee1b85c5257889a024420 size: 7848 |
...
The instructions to create an ONAP installation using the OOM Rancher/Kubernetes approach are in the ONAP wiki site (be sure to select the Casablanca version of the instructions). Once installed, there are further instructions on deploying ONAP at this wiki page. To install the development image rather than the nexus3 image, open a terminal session with the VM containing the Rancher controller (sb4-rancher). There are instructions on how to create a ssh tunnel to sb4-rancher at this wiki page. Once logged in, we must update parameters in the values.yaml file in the Helm chart for SDNC in the OOM repository, shown here.
Code Block |
---|
% ls -F git/oom/kubernetes/sdnc
charts/ Chart.yaml Makefile requirements.lock requirements.yaml resources/ sdnc-prom/ templates/ values.yaml
|
Override file for the SDNC values.yaml file
The simplest way to override the values is to copy the entire values.yaml file into a separate file (I use ~/oof-pci/override-sndc.yaml) and modify the relevant parameters in that new file. The new values are shown below. We identify the repository with the source image name and tag, create a cluster of three ODL members, and create a redundant MySQL deployment of two instances.
...
#################################################################
# Application configuration defaults.
#################################################################
# application images
repository: nexus3.onap.org:10001
repositoryOverride: registry.hub.docker.com
pullPolicy: Always
#image: onap/sdnc-image:1.4.1
image: ft3e0tab7p92qsoceonq/oof-pci-sdnr:1.4.2-SNAPSHOT
...
mysql:
nameOverride: sdnc-db
service:
name: sdnc-dbhost
internalPort: 3306
nfsprovisionerPrefix: sdnc
sdnctlPrefix: sdnc
persistence:
mountSubPath: sdnc/mysql
enabled: true
disableNfsProvisioner: true
replicaCount: 2
geoEnabled: false
...
# default number of instances
replicaCount: 3
...
Override file for the ONAP values.yaml file
By default, the OOM Rancher/Kubernetes script installs all of the components, which we do not need for the proof-of-concept. We identify which components to install by copying the ~/git/oom/kubernetes/onap/values.yaml file into a separate "override" file (~/oof-pci/override-onap.yaml) and changing "enabled: true" to "enabled: false" for the unneeded components. Currently, these are the selected components.
...
Working with the ONAP oom and integration repositories in the "ubuntu" home directory in sb4-rancher
The sb4-rancher VM is the Rancher controller for the ONAP installation at OWL, and we keep clones of the ONAP oom and integration repositories in the ubuntu home directory. Below are commands to execute as user ubuntu in a terminal session with sb4-rancher. Please edit these commands if something is wrong or missing.
sudo -i -u ubuntu | Change to user ubuntu |
cd ~/git/oom && git status && git checkout . && git pull | Discard any changes in the oom repository and pull down the latest. I assume that we keep all of our changes in override files and other locations |
cd ~/git/integration | This repository maintains version numbers of the latest code for the ONAP components. There is information about the repository at https://gerrit.onap.org/r/gitweb?p=integration.git;a=summary. |
git checkout casablanca | We agreed to use the casablanca release for the proof-of-concept |
cd ~/git/integration/version-manifest/src/main/scripts | This folder contains scripts that update the OOM repository with the correct version numbers |
./update-oom-image-versions.sh \ ~/git/integration/version-manifest/src/main/resources/docker-manifest-release.csv \ ~/git/oom | Execute a script to update version numbers in the Helm charts in the oom/kubernetes directory. This will make changes to the values.yaml files, so “git status” in ~/git/oom will return many changes. "Release” because there is also a “staging” script. We want to use the release version numbers. |
cd ~/git/oom/kubernetes | Start following instructions at https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins |
sudo cp -r ~/oom/kubernetes/helm/plugins/ ~/.helm | Get the Helm deploy plugin developed by the OOM group |
make repo | This updates the Helm repo served by a local Helm process listening on port localhost:8879 |
make && make onap | I think this updates the local Helm repo with the latest versions in ~/git/oom/kubernetes. These commands take a while. |
After these commands, the repositories and Helm resources have been updated to the latest versions, and we can use the commands described in the next section to deploy our code into ONAP.
Preparing to install the SDNC Docker image
To install the development image rather than the nexus3 image, open a terminal session with the VM containing the Rancher controller (sb4-rancher). There are instructions on how to create a ssh tunnel to sb4-rancher at this wiki page. Once logged in, we must update parameters in the values.yaml file in the Helm chart for SDNC in the OOM repository, shown here.
Code Block |
---|
% ls -F git/oom/kubernetes/sdnc
charts/ Chart.yaml Makefile requirements.lock requirements.yaml resources/ sdnc-prom/ templates/ values.yaml
|
Override file for the SDNC values.yaml file
The simplest way to override the values is to copy the entire values.yaml file into a separate file (I use ~/oof-pci/override-sndc.yaml) and modify the relevant parameters in that new file. The new values are shown below. We identify the repository with the source image name and tag, create a cluster of three ODL members, and create a redundant MySQL deployment of two instances.
...
#################################################################
# Application configuration defaults.
#################################################################
# application images
repository: nexus3.onap.org:10001
repositoryOverride: registry.hub.docker.com
pullPolicy: Always
#image: onap/sdnc-image:1.4.1
image: ft3e0tab7p92qsoceonq/oof-pci-sdnr:1.4.2-SNAPSHOT
...
mysql:
nameOverride: sdnc-db
service:
name: sdnc-dbhost
internalPort: 3306
nfsprovisionerPrefix: sdnc
sdnctlPrefix: sdnc
persistence:
mountSubPath: sdnc/mysql
enabled: true
disableNfsProvisioner: true
replicaCount: 2
geoEnabled: false
...
# default number of instances
replicaCount: 3
...
Override file for the ONAP values.yaml file
By default, the OOM Rancher/Kubernetes script installs all of the components, which we do not need for the proof-of-concept. We identify which components to install by copying the ~/git/oom/kubernetes/onap/values.yaml file into a separate "override" file (~/oof-pci/override-onap.yaml) and changing "enabled: true" to "enabled: false" for the unneeded components. Currently, these are the selected components.
aaf | false |
aai | true |
appc | false |
clamp | false |
cli | false |
consul | false |
contrib | false |
dcaegen2 | false |
dmaap | true |
esr | false |
log | true |
sniro-emulator | true |
oof | true |
msb | false |
multicloud | false |
nbi | false |
policy | true |
pomba | false |
portal | true |
robot | true |
sdc | false |
sdnc | true |
so | true |
uui | false |
vfc | false |
vid | false |
vnfsdk | false |
Command to install ONAP with the development image
Following the guidelines at the OOM wiki page, I use this command to install ONAP with the desired configuration. The ~/oof-pci files are located into https://github.com/onap-oof-pci-poc/ccsdk repository.
Code Block |
---|
cd ~/git/oom/kubernetes
helm install sdnc/ -n demo-sdnc --namespace onap -f ~/oof-pci/override-onap.yaml -f ~/oof-pci/override-sdnc.yaml |
The parameter "demo" is used to preface each ONAP component with "demo-" so we have "demo-sdnc," for example. The "sdnc/" parameter instructs helm to use that directory to guide the deployment. The "--namespace onap" parameter causes ONAP to be deployed into the kubernetes namespace "onap." The "-f ~/oof-pci/override-onap.yaml -f ~/oof-pci/override-sdnc.yaml" parameters instruct helm to override the parameters in ~/git/oom/kubernetes/onap/values.yaml and ~/git/oom/kubernetes/sdnc/values.yaml file with the values in the files following the "-f" option. There can be a series of override files, and the last file takes precedence.
Commands to update the development image
If there is already an instance SDNC installed, it must be deleted before installing a new version. Use these commands.
Code Block |
---|
helm del demo-sdnc --purge
kubectl get persistentvolumeclaims -n onap | grep demo-sdnc | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash
kubectl get persistentvolumes -n onap | grep demo-sdnc | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash
kubectl get secrets |
Command to install ONAP with the development image
Following the guidelines at the OOM wiki page, I use this command to install ONAP with the desired configuration.
Code Block |
---|
cd ~/git/oom/kubernetes
sudo helm deploy demo ./onap --namespace onap -f ~/oof-pci/override-onap.yaml -f ~/oof-pci/override-sdnc.yaml |
The parameter "demo" is used to preface each ONAP component with "demo-" so we have "demo-sdnc," for example. The "./onap" parameter instructs helm to use that directory to guide the deployment. The "--namespace onap" parameter causes ONAP to be deployed into the kubernetes namespace "onap." The "-f ~/oof-pci/override-onap.yaml -f ~/oof-pci/override-sdnc.yaml" parameters instruct helm to override the parameters in ~/git/oom/kubernetes/onap/values.yaml and ~/git/oom/kubernetes/sdnc/values.yaml file with the values in the files following the "-f" option. There can be a series of override files, and the last file takes precedence.
Commands to update the development image
If there is already an instance SDNC installed, it must be deleted before installing a new version. I use these commands.
Code Block |
---|
helm del demo-sdnc --purge
kubectl get persistentvolumes -n onap | grep demo-sdnc | sed 's/\(^[^ ]\+\).*/kubectl delete persistentvolumes -n onap \1/'
kubectl get persistentvolumeclaims -n onap | grep demo-sdnc | sed 's/\(^[^ ]\+\).*/kubectl delete persistentvolumeclaims -n onap \1/'
kubectl get secrets -n onap | grep demo-sdnc | sed 's/\(^[^ ]\+\).*/kubectl delete secrets -n onap \1/'
kubectl get clusterrolebindings -n onap | grep demo-sdnc | sed 's/\(^[^ ]\+\).*/kubectl delete clusterrolebindings -n onap \1/' |
The first command deletes SDNC but, despite the "--purge" option, some residual resources remain. The subsequent commands discovers those resources and generates commands that can be copied and pasted into your terminal session to be executed. If you know how to pipe a string into bash so it can be executed directly, kindly update this wiki page. The "helm del..." command takes some time, so please be patient. Once SDNC has been deleted, you can install the new version using the commands in the previous section.
Accessing SDNC/SDNR
SDNC/SDNR Browser Interfaces
Now that SDNC/SDNR is deployed, how can you access it? To access the browser interfaces of SDNC/SDNR, I use this sequence of commands. First:
Code Block |
---|
% kubectl get pods -n onap -o wide | grep NODE && kubectl get pods -n onap -o wide | grep sdnc NAME -n onap | grep demo-sdnc | sed -r 's/(^[^ ]+).*/kubectl delete secrets READY STATUS -n onap \1/' | bash kubectl get clusterrolebindings -n onap RESTARTS| grep demo-sdnc AGE| sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings IP -n onap \1/' | bash |
The first command deletes SDNC but, despite the "--purge" option, some residual resources remain. The subsequent commands discover and delete those resources. The "helm del..." command takes some time, so be patient. Once SDNC has been deleted, you can install the new version using the commands in the previous section.
Accessing SDNC/SDNR
SDNC/SDNR Browser Interfaces
Now that SDNC/SDNR is deployed, how can you access it? To access the browser interfaces of SDNC/SDNR, you can use this sequence of commands. First:
Code Block |
---|
% kubectl get pods -n onap -o wide | grep NODE && kubectl get pods -n onap -o wide | grep sdnc NAME NODE demo-sdnc-controller-blueprints-694b7ff9d-gmrtd 1/1 Running 0 20h 10.42.42.8 sb4-k8s-1 demo-sdnc-controller-blueprints-db-0 1/1 Running 0 20h 10.42.100.157 sb4-k8s-1 demo-sdnc-nengdb-0 READY 1/1 STATUS Running RESTARTS AGE 0 IP 20h 10.42.101.202 sb4-k8s-3NODE demo-sdnc-networkcontroller-nameblueprints-gen-7fc56878b6-sz8ps 694b7ff9d-gmrtd 1/1 Running 0 20h 10.42.5542.2438 sb4-k8s-31 demo-sdnc-sdnccontroller-blueprints-db-0 2/21/1 Running 0 20h 10.42.105100.225157 sb4-k8s-41 demo-sdnc-sdncnengdb-10 21/21 Running 0 20h 10.42.11101.48202 sb4-k8s-13 demo-sdnc-sdnc-2-network-name-gen-7fc56878b6-sz8ps 2/21/1 Running 0 20h 10.42.955.208 243 sb4-k8s-23 demo-sdnc-sdnc-ansible-server-7ddf4c54dd-vq8770 1/1 2/2 Running 0 20h 10.42.137105.38 225 sb4-k8s-14 demo-sdnc-sdnc-db-01 2/2 Running 0 20h 10.42.11911.11248 sb4-k8s-31 demo-sdnc-sdnc-db-12 2/2 Running 0 20h 10.42.269.168208 sb4-k8s-42 demo-sdnc-sdnc-ansible-dgbuilderserver-647d9bddb87ddf4c54dd-b2gxp vq877 1/1 Running 0 20h 10.42.93137.14838 sb4-k8s-41 demo-sdnc-sdnc-dmaap-listener-f9c9fd74c-w42rqdb-0 0/1 Init:0/1 0 2/2 Running 0 20h 10.42.38119.155 112 sb4-k8s-3 demo-sdnc-sdnc-portal-6fcd6b8445-bhf48db-1 12/12 Running 0 20h 10.42.24926.112168 sb4-k8s-4 demo-sdnc-sdnc-uebdgbuilder-listener-849d6498b5-mf8pw647d9bddb8-b2gxp 01/1 Init:0/1Running 0 20h 10.42.093.101 148 sb4-k8s-34 demo-sosdnc-so-sdnc-adapterdmaap-5b7787596dlistener-bm9xnf9c9fd74c-w42rq 10/1 RunningInit:0/1 0 2d20h 10.42.17038.141155 sb4-k8s-1 % ping sb4-k8s-4 PING sb4-k8s-4 (10.31.1.79) 56(84) bytes of data. 64 bytes from sb4-k8s-4 (10.31.1.79): icmp_seq=1 ttl=64 time=0.505 ms |
We see that there are three instances of SDNC running and two instances of SDNC-DB and that they are deployed in different nodes, as expected. All of the pods have private IP addresses that are not accessible from outside the ONAP deployment, but demo-sdnc-sdnc-0 is installed in NODE sb4-k8s-4, which has IP address 10.31.1.79. We now enter this command.
Code Block |
---|
% kubectl get svc -n onap | grep NAME && kubectl get svc -n onap | grep sdnc NAME 3 demo-sdnc-sdnc-portal-6fcd6b8445-bhf48 1/1 Running 0 20h 10.42.249.112 sb4-k8s-4 demo-sdnc-sdnc-ueb-listener-849d6498b5-mf8pw TYPE 0/1 CLUSTER-IP Init:0/1 EXTERNAL-IP 0 20h PORT(S) 10.42.0.101 sb4-k8s-3 demo-so-so-sdnc-adapter-5b7787596d-bm9xn 1/1 Running 0 AGE sdnc 2d 10.42.170.141 sb4-k8s-1 % ping sb4-k8s-4 PING sb4-k8s-4 (10.31.1.79) 56(84) bytes of data. 64 bytes from sb4-k8s-4 (10.31.1.79): icmp_seq=1 ttl=64 time=0.505 ms |
We see that there are three instances of SDNC running and two instances of SDNC-DB and that they are deployed in different nodes, as expected. All of the pods have private IP addresses that are not accessible from outside the ONAP deployment, but demo-sdnc-sdnc-0 is installed in NODE sb4-k8s-4, which has IP address 10.31.1.79. If you cannot use ping to determine the IP address of the node, the command "kubectl describe node <node-name> -n <namespace>" will provide the address.
You can now enter this command.
Code Block |
---|
% kubectl get svc -n onap | grep NAME && kubectl get svc -n onap | grep sdnc NAME NodePort 10.43.141.133 <none> 8282:30202/TCP,8202:30208/TCP,8280:30246/TCP,8443:30267/TCP 20h sdnc-ansible-server ClusterIP 10.43.41.91 <none> 8000/TCP TYPE CLUSTER-IP EXTERNAL-IP PORT(S) 20h sdnc-cluster ClusterIP None <none> AGE sdnc 2550/TCP NodePort 10.43.141.133 <none> 8282:30202/TCP,8202:30208/TCP,8280:30246/TCP,8443:30267/TCP 20h sdnc-ansible-dbhostserver ClusterIP 10.43.41.91 ClusterIP <none> None <none> 8000/TCP 3306/TCP 20h sdnc-cluster 20h sdnc-dbhost-read ClusterIP None ClusterIP 10.43.100.184 <none> 33062550/TCP 20h sdnc-dgbuilderdbhost NodePort ClusterIP 10.43.16.12 None <none> <none> 3000:30203/TCP 3306/TCP 20h sdnc-dmaap-listener ClusterIP20h sdnc-dbhost-read None ClusterIP <none> 10.43.100.184 <none> <none> 3306/TCP 20h sdnc-portal dgbuilder NodePort 10.43.4016.14912 <none> 88433000:3020130203/TCP 20h sdnc-dmaap-sdnctldb01 listener ClusterIP None <none> <none> 3306/TCP 20h sdnc-sdnctldb02portal ClusterIP NodePort None 10.43.40.149 <none> 33068843:30201/TCP 20h sdnc-ueb-listenersdnctldb01 ClusterIP None <none> <none>3306/TCP 20h so-sdnc-adaptersdnctldb02 ClusterIP 10.43.141.124None <none> 80863306/TCP 2d |
SDNC is presenting a service at a NodePort that is accessible from outside the ONAP installation. PORT 8282:30202 means that port 30202 is accessible externally and maps to internal port 8282 (I'm not sure why 8282 rather than 8181; a port mapping from 8282 to 8181 may be set in a Dockerfile). Therefore, SDNC is listening at sb4-k8s-4:30202, or 10.31.1.79:30202. By creating a ssh tunnel to sb4-k8s-4 (described here), one can open a browser to localhost:30202/apidoc/explorer/index.html and see this.
SDNC/SDNR Terminal Session
There are (at least) two ways to open a terminal session with SDNC/SDNR. One way is through the command line. To learn the names of the SDNC/SDNR pods:
20h
sdnc-ueb-listener ClusterIP None <none> <none> 20h
so-sdnc-adapter ClusterIP 10.43.141.124 <none> 8086/TCP 2d |
SDNC is presenting a service at a NodePort that is accessible from outside the ONAP installation. PORT 8282:30202 means that port 30202 is accessible externally and maps to internal port 8282 (the Dockerfile that creates the SDNC image maps host port 8282 to container port 8181). Therefore, SDNC is listening at sb4-k8s-4:30202, or 10.31.1.79:30202. By creating a ssh tunnel to sb4-k8s-4 (described here), one can open a browser to localhost:30202/apidoc/explorer/index.html and see this.
SDNC/SDNR Terminal Session
There are (at least) two ways to open a terminal session with SDNC/SDNR. One way is through the command line. To learn the names of the SDNC/SDNR pods:
Code Block |
---|
% kubectl get pods -n onap | grep demo-sdnc-sdnc
demo-sdnc-sdnc-0 2/2 Running 0 20m
demo-sdnc-sdnc-1 2/2 Running 0 3m
demo-sdnc-sdnc-2 2/2 Running |
Code Block |
% kubectl get pods -n onap | grep demo-sdnc-sdnc demo-sdnc-sdnc-0 0 3m demo-sdnc-sdnc-ansible-server-7ddf4c54dd-7t5l5 2 1/21 Running 0 20m demo-sdnc-sdnc-1 db-0 2/2 Running 0 3m20m demo-sdnc-sdnc-db-1 2/2 Running 0 3m demo-sdnc-sdnc-dgbuilder-647d9bddb8-t8lsh 2/21/1 Running 0 3m20m demo-sdnc-sdnc-ansibledmaap-serverlistener-7ddf4c54ddf9c9fd74c-7t5l5vblr7 10/1 Running Init:0/1 0 20m demo-sdnc-sdnc-portal-db6fcd6b8445-0dkxfq 2/21/1 Running 0 20m demo-sdnc-sdnc-ueb-listener-db849d6498b5-1q2jhf 0/1 Init:0/1 0 2/2 Running 0 3m demo-sdnc-sdnc-dgbuilder-647d9bddb8-t8lsh 1/1 Running 0 20m demo-sdnc-sdnc-dmaap-listener-f9c9fd74c-vblr7 0/1 Init:0/1 0 20m demo-sdnc-sdnc-portal-6fcd6b8445-dkxfq 1/1 Running 0 20m demo-sdnc-sdnc-ueb-listener-849d6498b5-q2jhf 0/1 Init:0/1 0 20m |
Then, to open a session with demo-sdnc-sdnc-0, for example, enter:
Code Block |
---|
% kubectl exec -it demo-sdnc-sdnc-0 -n onap -- /bin/bash
Defaulting container name to sdnc.
Use 'kubectl describe pod/demo-sdnc-sdnc-0' to see all of the containers in this pod.
root@demo-sdnc-sdnc-0:/# |
Another approach is to use the Kubernetes GUI. Browse to the GUI, enter "sdnc" in the "Search" window and then scroll down to "Pods."
Click on "demo-sdnc-sdnc-0," for example, and then on "EXEC" in the new window with details about that pod.
This will open a new window with a terminal session to the SDNC container in that pod.
20m |
Then, to open a session with demo-sdnc-sdnc-0, for example, enter:
Code Block |
---|
% kubectl exec -it demo-sdnc-sdnc-0 -n onap -- /bin/bash
Defaulting container name to sdnc.
Use 'kubectl describe pod/demo-sdnc-sdnc-0' to see all of the containers in this pod.
root@demo-sdnc-sdnc-0:/# |
Another approach is to use the Kubernetes GUI. Browse to the GUI, enter "sdnc" in the "Search" window and then scroll down to "Pods."
Click on "demo-sdnc-sdnc-0," for example, and then on "EXEC" in the new window with details about that pod.
This will open a new window with a terminal session to the SDNC container in that pod.
DMaaP Topics
These DMaaP messages are created and working in OWL.
- DCAE_EVENT_OUTPUT
- PCI-NOTIF-TOPIC-NGHBR-LIST-CHANGE-INFO
- SDNR-CL
- SDNR-CL-RSP
Please let me know if I missed a message. The URL for the DMaaP message router is http://10.31.1.51:30227 (VM sb4-k8s-3). The DMaaP message router doesn’t inspect the contents of a message, so the messages are free-form. Here’s an example of a publish:
Code Block |
---|
POST http://10.31.1.51:30227/events/SDNR-CL
Body
{"name": "value"} |
And a subscribe:
Code Block |
---|
GET http://10.31.1.51:30227/events/SDNR-CL/group-id-1/consumer-id-1 |
You can work from your local machine by setting up a tunnel, e.g.,
Code Block |
---|
ssh -A -t <username>@console.sb10.orbit-lab.org -L 30227:localhost:30227 \
ssh -A -t <username>@node2-1 -L 30227:localhost:30227 \
ssh -A -t <username>@10.31.1.51 -L 30227:localhost:30227 |
With that tunnel, you can access the message router at localhost:30227.
Conclusion
Please feel free to edit this page to make corrections or improvements. Your assistance will be greatly appreciated.