This page mainly describes the template design steps of option1 option2 for the E2E Network Slicing use case for Istanbul release.
Template design for Option1 can be found in below link:
Template design for Option2 is as follows:
| Gliffy Diagram | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Sample Service Templates for Option 12:
//ToDo
Table of Contents
Create Service Category
Login SDC HOME page with Admin Role，create the following categories:
CST，ServiceProfile，AN SliceProfile，AN CST，ServiceProfile，AN NF Slice Profile, CN SliceProfile，TN SliceProfile，NST， TN BH NSST, TN MH NSST, TN FH NSST, TN Network Requirement，AN NF NSST，CN NSST, AN NSST.
1.
...
Create TN_Network_Req_T
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'CN_NSSTTN_Network_Req_T' as the name to indicate the meaning of the service.
- Select ‘CN NSSTTN Network Requirement’ as Category.
- Provide 'ONAP_internal' as Service Role
2. NSST should be composed of network service(NS). For NS helm artifacts, CBA package and other design time activities, please follow below link:
https://wiki.onap.org/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS
3. In Composition section, drag the elements of ‘Fiveg’(NS) from the Elements palette to the service canvas.
4. In Properties Assignment section,define Service properties.
a. Click 
c. Set property values as shown bellow.
2.Create TN_Network_Req_T
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'TN_Network_Req_T' as the name to indicate the meaning of the service.
- Select ‘TN Network Requirement’ as Category.
- Provide 'ONAP_internal' as Service Role
- Provide Description and click on create button.
2. In Properties Assignment section2. In Properties Assignment section, define the following service properties.
...
3. Distribute the service model and check the results.
...
2.Create TN_Network_Req_AR_
...
BH（Allotted Resource)
Login SDC HOME page with Designer Role and add VF.
...
- Suggest 'TN_Network_Req_AR_BH' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor Release.
...
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
...
3.CreateTN_Network_Req_AR_FH（Allotted Resource)
Login SDC HOME page with Designer Role , add new serviceand add VF.
1. In the General section, complete all required fields.
- Suggest 'TN_
...
- Network_Req_AR_FH' as the name to indicate the meaning of the service.
- Select
...
- ‘Allotted Resource’ as Category.
- Provide 'ONAP
...
- ' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Composition section，search 'TN_Network_Req_ARAllotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define the following service efine Service properties.
4. Distribute the service model and check the results.
...
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
4.Create TN_Network_Req_AR_MH（Allotted Resource)
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'TN_Network_FHReq_AR_MH' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor Release.
...
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
...
5.Create
...
CN_NSST
Login SDC HOME page with Designer Role and add VF, add new service.
1. In the General section, complete all required fields.
- Suggest '
...
- CN_
...
- NSST' as the name to indicate the meaning of the service.
- Select
...
- ‘CN NSST’ as Category.
- Provide
...
- 'ONAP_internal' as Service Role
2. NSST should be composed of network service(NS). For NS helm artifacts, CBA package and other design time activities, please follow below link:
https://wiki.onap.org/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS
3. In Composition section, drag the elements of ‘Fiveg’(NS) 2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
34. In Properties Assignment section,define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
...
Click
c. Set property values as shown bellow.
6.Create AN_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'TNAN_MH_NSST' as the name to indicate the meaning of the service.
- Select ‘TN MH AN NSST’ as Category.
- Provide 'TRANSPORT' as Service Type.Provide 'TN_MHONAP_internal' as Service Role.
2. In Composition section，search 'TNRAN_MHNF_ARNSST', drag the element from the Elements palette to the service canvas.
...
the Elements palette to the service canvas.
3.In Properties Assignment section, add anNSSCap to the service properties.
4. Distribute the service model and check the results.
7.Create TN_BH_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'TN_FHBH_NSST' as the name to indicate the meaning of the service.
- Select ‘TN FH BH NSST’ as Category.
- Provide 'TRANSPORT' as Service Type.Provide 'TN_FHONAP_internal' as Service Role.
2. In Composition section，search 'TN_FHNetwork_Req_AR_BH', drag the element from the Elements palette to the service canvas.
...
the service canvas.
3.In Properties Assignment section, define the following service properties.
4. Distribute the service model and check the results.
8.Create TN_MH_NSST
Login SDC HOME page with Designer Role, add new VFservice.In
1. In the General section, complete all required fields.
- Suggest '
...
- TN_MH_
...
- NSST' as the name to indicate the meaning of the service.
- Select ‘
...
- TN MH NSST’ as Category.
- Provide '
...
- TRANSPORT' as
...
- Service Type.
- Provide '
...
- ONAP_internal' as
...
- Service Role.
2. In Composition section，search 'ExtCP2' from Generic CategoryTN_Network_Req_AR_MH', drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_E2'.
...
to the service canvas.
9.Create TN_FH_NSST
Login SDC HOME page with Designer Role, add new VFservice.In
1. In the General section, complete all required
...
fields.
- Suggest 'TN_FH_NSST' as the name to indicate the meaning of the service.
- Select ‘TN FH NSST’ as Category.
- Provide 'TRANSPORT' as Service Type.
- Provide 'ONAP_internal' as Service Role.
2. In Composition section，search 'TN_Network_Req_AR_FH', drag the element from the Elements palette to the service canvas.
10.Create NrtRIC_resource
...
- Suggest 'CUCP_Resource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '5G RAN' as Vendor Name
- Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_NG_c'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
...
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
- Suggest 'CUUPNrtRIC_Resourceresource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '5G RAN' as Vendor Name.
- Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Release.
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename
- Rename ExtCP2 as 'EP_NG_u'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1UE2'.
...
11.
...
Create CUCP_Resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
- Suggest 'DUCUCP_Resource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '5G RAN' as Vendor Name
- Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_NG_E2c'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FHE1'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1CE2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1UF1C'.
...
12.Create
...
CUUP_
...
Resource
Login SDC HOME page with Designer Role, add new serviceVF.
...
In the General section, complete all required fields.
- Suggest '
...
- CUUP_
...
- Resource' as the name to indicate the meaning of the service.
- Select ‘
...
- Network Elements’ as Category.
- Provide
...
- '5G RAN' as Vendor Name
- Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_NG_u'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.
13.Create DU_Resource
2. In Composition section，drag the elements of ‘NrtRIC_resource’，‘CUCP_Resource’，‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
...
Login SDC HOME page with Designer Role, add new serviceVF.
...
In the General section, complete all required fields.
- Suggest
...
- 'DU_Resource' as the name to indicate the meaning of the service.
- Select ‘Network Elements’ as Category.
- Provide '5G RAN' as Vendor Name
- Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
- Rename ExtCP2 as 'EP_E2'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FH'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
- drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.
14.Create RAN_NF NSST
...
2. In Composition section，drag the elements of ‘RAN_NF_NSST’，‘TN_MH_NSST’，‘TN_FH_NSST’ from the Elements palette to the service canvas.
3.In Properties Assignment section,define Service properties.
a. Click
...
Login SDC HOME page with Designer Role and add VF, add new service.
1. In the General section, complete
...
all required fields.
- Suggest 'RAN_NF_NSST' as the name to indicate the meaning of the service.
- Select ‘AN NF NSST’ as Category.
- Provide 'RAN' as Service Type
...
- .
- Provide 'ONAP_internal' as Service Role.
2. In Composition section，search 'Allotted Resource', drag the element section，drag the elements of ‘NrtRIC_resource’，‘CUCP_Resource’，‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click 'AllottedResource 0' in the right pane. Click
b. Use the value of CN_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'
15.Create
...
CN_AR（Allotted Resource）
Login SDC HOME page with Designer Role and add VF.1. In the General section, complete all required fields.
1. In the General section, complete all required fields.
- Suggest 'CN_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of
...
CN_
...
NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
16.Create Tn_
...
BH_AR（Allotted Resource）
...
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fieldsthe General section, complete all required fields.
- Suggest 'Tn_BH_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_
...
BH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
17.Create Tn_
...
FH_AR（Allotted Resource）(New)
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.required fields.
- Suggest 'Tn_FH_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor ReleaseSelect ‘Allotted Resource’ as Category.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_
...
FH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
18.Create
...
Tn_MH_AR（Allotted Resource）(New)
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'Tn_MH_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
- Provide 'ONAP' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value
...
of TN_MH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
19.Create
...
AN_AR（Allotted Resource）
Login SDC HOME page with Designer Role , add new serviceand add VF.
1. In the General section, complete all required fields.
- Suggest '
...
- AN_AR' as the name to indicate the meaning of the service.
- Select
...
- ‘Allotted Resource’ as Category.
...
- Provide 'ONAP
...
- ' as Vendor Name.
- Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element
...
2. In Composition section，drag the elements of ‘AN_AR’，‘Tn_BH_AR’，，‘Tn_FH_AR’，，‘Tn_MH_AR’，‘CN_AR’ from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a.
...
Set property values as shown bellow.
...
Click 'AllottedResource 0' in the right pane
b. Use the value of AN_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
20.Create
...
NSTO2 Service Template
Login SDC HOME page with Designer Role and add VF, add new service.
1. In the General section, complete all required fields.
- Suggest '
...
- NSTO2' as the name to indicate the meaning of the service.
- Select
...
- ‘NST’ as Category.
- Suggest 'ONAP_internal' as Service Role
2. In Composition section，search 'Allotted Resource', drag the element section，drag the elements of ‘AN_AR’，‘Tn_BH_AR’，，‘Tn_FH_AR’，，‘Tn_MH_AR’，‘CN_AR’ from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Select 'providing_service_invariant_uuid' and 'providing_service_uuid' and click Declare Input.
...
Click
Set property values as shown bellow.
21.Create Slice_AR（Allotted Resource）
Login SDC HOME page with Designer Role , add new serviceand add VF.
1. In the General section, complete all required fields.
- Suggest '
...
- Slice_
...
- AR' as the name to indicate the meaning of the service.
- Select
...
- ‘Allotted Resource’ as Category.
2. In Composition section，search 'Slice_ARAllotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Add some properties as the picture shown bellow.
b. Select all properties and click Declare Input. c. Click 'Slice_AR AllottedResource 0' in the right pane
db. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
22.Create CN_SliceProfile Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'CN_SliceProfile' as the name to indicate the meaning of the service.
- Select ‘CN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. Properties Assignment section, define Service properties.
a. Click
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
23.Create SliceProfile_AN_NF_O2 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'SliceProfile_AN_NF_O2' as the name to indicate the meaning of the service.
- Select ‘AN NF SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
Create SliceProfile_AN_O1 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'SliceProfile_AN_O1' as the name to indicate the meaning of the service.
- Select ‘AN SliceProfile’ as Category.
2. In Composition section，drag the elements of ‘SliceProfile_AN_NF_O1’，‘TN_SliceProfile’ from the Elements palette to the service canvas.
...
' and click Declare Input.
22.Create TN_SliceProfile Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'TN_SliceProfile' as the name to indicate the meaning of the service.
- Select ‘TN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Add some properties as the picture shown bellow.
b. Select all properties and click Declare Input.
c. Click 'Slice_AR 0'in the right pane
d. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
23.Create CN_SliceProfile Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'CN_SliceProfile' as the name to indicate the meaning of the service.
- Select ‘CN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. Properties Assignment section, define Service properties.
a. Click
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
24.Create SliceProfile_AN_NF_O2 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'SliceProfile_AN_NF_O2' as the name to indicate the meaning of the service.
- Select ‘AN NF SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
25.Create ServiceProfile_O2 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
- Suggest 'ServiceProfile_O1O2' as the name to indicate the meaning of the service.
- Select ‘ServiceProfile’ as Category.
2. In Composition section，search 'Slice_AR', ’SliceProfile_CN‘，‘SliceProfile_AN_O1’，’CN_SliceProfile‘，‘SliceProfile_AN_NF_O2’,‘SliceProfile‘TN_TN’，SliceProfile’，drag the element from the Elements palette to the service canvas.
...
...
26.
...
Create CST_
...
O2 Service Template
Login SDC HOME page with Designer Role, add new service.
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
curl --user AAI:AAI -X PUT -H "X-FromAppId:AAI" -H "X-TransactionId:get_aai_subscr" -H "Accept:application/json" -H "Content-Type:application/json" -k "https://{worker-vm-ip}:30233/aai/v21/service-design-and-creation/models/model/bfd35bbf-4469-44d2-aa13-eb531b2d4e7a" -d '{
"model-invariant-id": "bfd35bbf-4469-44d2-aa13-eb531b2d4e7a",
"model-type": "Service",
"model-vers": {
"model-ver": [
{
"model-version-id": "fd4ca61e-2147-4693-ad2c-2786889b51a5",
"model-name": "NSTO1NSTO2",
"model-version": "1.0"
}
]
}
}' |
...