This long-winded page name will revert to "Running the ONAP vFirewall Demo...." when we are finished before 9 Dec - and moved out of the wiki root
Please join and post "validated" actions/config/results - but do not move or edit this page until we get a complete vFW run before Ideally the 4 Dec KubCon conference and worst case the 11 Dec ONAP Conference - thank you
Under construction - this page is a consolidation of all details in getting the vFirewall running over the next 2 weeks in prep of anyone that would like to demo it for the F2F in Dec.
ADD content ONLY when verified - with evidence (screen-cap, JSON output etc..) DO paste any questions and unverified config/actions in the comment section at the end - for the team to verify |
Daily meeting at 1200 EDT noon Nov 27 to 8 Dec 2017 - https://zoom.us/j/7939937123 see schedule at https://lists.onap.org/pipermail/onap-discuss/2017-November/006483.html
Statement of Work
Ideally we provide this page as a the draft that will go into ReadTheDocs.io - where this page gets deleted and referenced there.
There are currently 3 or more distinct pages, email threads, presentations, phone calls, meetings where all the details needed to "Step by Step" get a running vFirewall up are located.
We would like to get to the point where we were before Aug 2017 where an individual with an Openstack environment (OOM as well now) - could follow each instruction point (action - and expected/documented result/output) and end up with our current minimal sanity usecase - the vFirewall
If you have any details on configuration of getting up the vFirewall post them to the comments section and it will be tested and incorporated
Ideally any action added to this page itself - is fully tested with resulting output (text/screencap) - pasted as a reference.
JIRAs: - OOM-459Getting issue details... STATUS for OOM and - INT-106Getting issue details... STATUS for HEAT
Output
1- This set of instructions below - to go from an empty OOM host or OpenStack lab - all the way to closed loop running.
2 - A set of videos - the vFirewall from an already deployed OOM and HEAT deployment - see the reference videos from Running the ONAP Demos#ONAPDeploymentVideos see
-
INT-333Getting issue details...
STATUS
3- Secondary videos on bringing up OOM and HEAT deployments
Running the vFirewall Demo
Prerequisites
Artifact | Location | Notes |
---|---|---|
openstack yaml and env | https://nexus.onap.org/content/sites/raw/org.onap.demo/heat/ONAP/1.1.0-SNAPSHOT/ | to be verified |
vFirewall yam and env | https://nexus.onap.org/content/sites/raw/org.onap.demo/heat/vFW/1.1.0-SNAPSHOT/ deprecated https://nexus.onap.org/content/sites/raw/org.openecomp.demo/heat/vFW/1.1.0-SNAPSHOT/ | to be verified |
vFirewall Tasks
Ideally we have an automated one-click vFW deployment - in the works -
T# | Task | Action Rest URL+JSON payload | Result JSON / Text / Screencap | Artifacts Link or attach file | Env OOM HEAT or both | Verify Read | Last run | Notes |
---|---|---|---|---|---|---|---|---|
Before robot init (init_customer and distribute | ||||||||
cloud region PUT to AAI | from postman:code PUT /aai/v11/cloud-infrastructure/cloud-regions/cloud-region/Openstack/RegionOne HTTP/1.1 { | 201 created | OOM | GET /aai/v11/cloud-infrastructure/cloud-regions/cloud-region/Openstack/RegionOne HTTP/1.1 200 OK { | 20171126 | |||
1 | TBD - cloud region PUT to AAI | HEAT | TBD 201711xx | |||||
TBD Customer creation | ||||||||
TBD SDC Distribution | ||||||||
TBD VID Service creation | ||||||||
TBD VID Service Instance deployment | ||||||||
TBD VID Create VNF | ||||||||
TBD VNF preload | ||||||||
TBD VID Create VF-Module | ||||||||
TBD Robot Heatbridge | ||||||||
TBD APPC mountpoint (Robot or REST) |
Verifying the vFirewall
Questions to Resolve
20171122: Do we run the older robot preload or do we do the SDNC rest PUT manually
Older Tutorial: Creating a Service Instance from a Design Model#RunRobotdemo.shpreloadofDemoModule
20171122: Do we use the older June vFW zip (yaml + env) or must we use a new split template
investigate Brian's comment on running vFW Demo on ONAP Amsterdam Release - "If you want to do closed loop for vFW there is a new two VNF service for Amsterdam (vFWCL - it is in the demo repo) that separates the traffic generator into a second VNF/Heat stack so that Policy an associate the event on the LB with the VNF to be controlled (the traffic generator) through APPC. Contact Pam and Marco for details."
- INT-342Getting issue details... STATUS
20171122: Do we run the older robot appc mountpoint or do we do the APPC rest PUT manually
20171125: Do we need R1 components to run the vFirewall like MultiVIM
There was a question about this from several developers - specifically is MSO wrapped now - or can we run with a minimal set of VM's to run the vFW.
- INT-346Getting issue details... STATUS
20171125: Workaround for intermittent AAI-vm1 failure in HEAT
https://lists.onap.org/pipermail/onap-discuss/2017-November/006508.html
- AAI-513Getting issue details... STATUS
For now my internal DNS was not working - AAI1 did not see AAI2 - thanks Venkata - harcoded the following in aai1 /etc/hosts
10.0.1.2 aai.hbase.simpledemo.openecomp.org 10.12.5.226 aai.hbase.simpledemo.openecomp.org root@onap-aai-inst1:/opt/test-config# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 603e85af586f nexus3.onap.org:10001/onap/model-loader "/opt/app/model-lo..." About a minute ago Up About a minute testconfig_model-loader_1 9826995b7ad5 nexus3.onap.org:10001/onap/data-router "/opt/app/data-rou..." About a minute ago Up About a minute 0.0.0.0:9502->9502/tcp testconfig_datarouter_1 19dd8614b767 nexus3.onap.org:10001/onap/search-data-service "/opt/app/search-d..." About a minute ago Up About a minute 0.0.0.0:9509->9509/tcp testconfig_aai.searchservice.simpledemo.openecomp.org_1 89b93577733f nexus3.onap.org:10001/onap/sparky-be "/bin/sh -c /opt/a..." About a minute ago Up About a minute 8000/tcp, 0.0.0.0:9517->9517/tcp testconfig_sparky-be_1 c13e604e1fdc aaionap/haproxy:1.1.0 "/docker-entrypoin..." About a minute ago Up About a minute 0.0.0.0:8443->8443/tcp testconfig_aai.api.simpledemo.openecomp.org_1 00aa79860bd5 nexus3.onap.org:10001/openecomp/aai-traversal "/bin/bash /opt/ap..." 4 minutes ago Up 4 minutes 0.0.0.0:8446->8446/tcp, 8447/tcp testconfig_aai-traversal.api.simpledemo.openecomp.org_1 54747c3594fc nexus3.onap.org:10001/openecomp/aai-resources "/bin/bash /opt/ap..." 7 minutes ago Up 7 minutes 0.0.0.0:8447->8447/tcp testconfig_aai-resources.api.simpledemo.openecomp.org_1
root@onap-aai-inst1:/opt/test-config# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 603e85af586f nexus3.onap.org:10001/onap/model-loader "/opt/app/model-lo..." About a minute ago Up About a minute testconfig_model-loader_1 9826995b7ad5 nexus3.onap.org:10001/onap/data-router "/opt/app/data-rou..." About a minute ago Up About a minute 0.0.0.0:9502->9502/tcp testconfig_datarouter_1 19dd8614b767 nexus3.onap.org:10001/onap/search-data-service "/opt/app/search-d..." About a minute ago Up About a minute 0.0.0.0:9509->9509/tcp testconfig_aai.searchservice.simpledemo.openecomp.org_1 89b93577733f nexus3.onap.org:10001/onap/sparky-be "/bin/sh -c /opt/a..." About a minute ago Up About a minute 8000/tcp, 0.0.0.0:9517->9517/tcp testconfig_sparky-be_1 c13e604e1fdc aaionap/haproxy:1.1.0 "/docker-entrypoin..." About a minute ago Up About a minute 0.0.0.0:8443->8443/tcp testconfig_aai.api.simpledemo.openecomp.org_1 00aa79860bd5 nexus3.onap.org:10001/openecomp/aai-traversal "/bin/bash /opt/ap..." 4 minutes ago Up 4 minutes 0.0.0.0:8446->8446/tcp, 8447/tcp testconfig_aai-traversal.api.simpledemo.openecomp.org_1 54747c3594fc nexus3.onap.org:10001/openecomp/aai-resources "/bin/bash /opt/ap..." 7 minutes ago Up 7 minutes 0.0.0.0:8447->8447/tcp testconfig_aai-resources.api.simpledemo.openecomp.org_1 |
Still need to verify the DNS setting for the other VMs
Original/Ongoing Doc References
running vFW Demo on ONAP Amsterdam Release
Clearwater vIMS Onboarding and Instantiation
Integration Test - could not find vFW content here
ONAP master branch Stabilization
- OOM-1Getting issue details... STATUS
- INT-106Getting issue details... STATUS
- INT-284Getting issue details... STATUS
List of ONAP Implementations under Test by Environment
Please add yourself to the list so we can target EPIC work based on environment affinity
Environment | Branch | Deployer | Contacts | vFW status | Notes |
---|---|---|---|---|---|
Intel Openlab | master | HEAT | none | cloud: http://10.12.25.2/auth/login/?next=/project/instances/ servers Starting up (20171123) - not ready yet | |
Intel Openlab | master | OOM Kubernetes | none | cloud: http://10.12.25.2/auth/login/?next=/project/instances/ server: 10.12.25.117 key: openlab_oom_key (pass by mail) (non-DCAE ONAP components only) partial 16g only until quota increased or we cluster 4 | |
Intel Openlab | release-1.1.0 | OOM Kubernetes | none | cloud: http://10.12.25.2/auth/login/?next=/project/instances/ server: 10.12.25.119 key: openlab_oom_key (pass by mail) | |
Rackspace | master | OOM Kubernetes | none | (non-DCAE ONAP components only) DCAEGEN2 not tested yet for R1 Running CD jobs hourly | |
Amazon AWS EC2 | master | OOM Kubernetes | none | (non-DCAE ONAP components only) - spot node terminated | |
Amazon AWS ECS | OOM Kubernetes | pending test | n/a | (non-DCAE ONAP components only) - node terminated | |
Google GCE | master | OOM Kubernetes | (non-DCAE ONAP components only) - node closed | ||
Google GCE CaaS | OOM Kubernetes | pending test | n/a | (non-DCAE ONAP components only) | |
Rackspace | HEAT | not supported yet | n/a | ||
Alibaba VM | OOM Kubernetes | none | not tested yet |
Continuous Deployment References
Tech | Servers | Details |
---|---|---|
HEAT | ||
Kubernetes | Jobs (AWS) Analytics (AWS) CD servers (Rackspace) cd2.onap.info | OOM R2 Master (Beijing) http://jenkins.onap.info/job/oom-cd-release-110-branch/ OOM R1 (Amsterdam) |
Recordings
put all daily and ongoing vFW formal run videos here - in the leadup to the 2 conferences.
Recording details | Recording embedded (currently limited to 30 min for the 100mb limit) or link | |
---|---|---|
ONAP installation of OOM from clean VM to Healthcheck | ||
OOM vFirewall SDC distribution to VF-Module creation | pending | |
ONAP installation of HEAT from empty OPENSTACK to Healthcheck | ||
HEAT vFirewall SDC distribution to VF-Module creation | pending |
Generated JIRAs
- OOM-461Getting issue details... STATUS
- AAI-513Getting issue details... STATUS
- INT-346Getting issue details... STATUS
Access and Deployment Configuration
Openlab VNC and CLI
The following is missing some sections and a bit out of date (v2 deprecated in favor of v3) -Integration Testing Schedule, 10-09-2017
Get an openlab account - Integration / Developer Lab Access | |
Install openVPN - Using Lab POD-ONAP-01 Environment For OSX both Viscosity and TunnelBlick work fine | |
Login to Openstack | |
Install openstack command line tools | Tutorial: Configuring and Starting Up the Base ONAP Stack#InstallPythonvirtualenvTools(optional,butrecommended) |
get your v3 rc file | |
verify your openstack cli access (or just use the jumpbox) | obrienbiometrics:aws michaelobrien$ source logging-openrc.sh obrienbiometrics:aws michaelobrien$ openstack server list +--------------------------------------+---------+--------+-------------------------------+------------+ | ID | Name | Status | Networks | Image Name | +--------------------------------------+---------+--------+-------------------------------+------------+ | 1ed28213-62dd-4ef6-bdde-6307e0b42c8c | jenkins | ACTIVE | admin-private-mgmt=10.10.2.34 | | +--------------------------------------+---------+--------+-------------------------------+------------+ |
get 15 elastic IP's | You may need to release unused IPs from other tenants - as we have 4 pools of 50 |
fill in your env parameters | public_net_id: 971040b2-7059-49dc-b220-4fab50cb2ad4 public_net_name: external ubuntu_1404_image: ubuntu-14-04-cloud-amd64 ubuntu_1604_image: ubuntu-16-04-cloud-amd64 flavor_small: m1.small flavor_medium: m1.medium flavor_large: m1.large flavor_xlarge: m1.large flavor_xxlarge: m1.xlarge vm_base_name: onap key_name: onap_key pub_key: ssh-rsa AAAAobrienbiometrics nexus_repo: https://nexus.onap.org/content/sites/raw nexus_docker_repo: nexus3.onap.org:10001 nexus_username: docker nexus_password: docker dmaap_topic: AUTO artifacts_version: 1.1.0-SNAPSHOT openstack_tenant_id: a85a07a5f34d4yyyyyyy openstack_tenant_name: Logyyyyyyy openstack_username: michaelyyyyyy openstack_api_key: Wyyyyyyy openstack_auth_method: password openstack_region: RegionOne horizon_url: http://10.12.25.2:5000/v3 keystone_url: http://10.12.25.2:5000 dns_list: PUT THE ADDRESS OF THE EXTERNAL DNS HERE (e.g. a comma-separated list of IP addresses in your /etc/resolv.conf in UNIX-based Operating Systems) external_dns: PUT THE FIRST ADDRESS OF THE EXTERNAL DNS LIST HERE dns_forwarder: PUT THE IP OF DNS FORWARDER FOR ONAP DEPLOYMENT'S OWN DNS SERVER dnsaas_config_enabled: PUT WHETHER TO USE PROXYED DESIGNATE dnsaas_region: PUT THE DESIGNATE PROVIDING OPENSTACK'S REGION HERE dnsaas_keystone_url: PUT THE DESIGNATE PROVIDING OPENSTACK'S KEYSTONE URL HERE dnsaas_tenant_name: PUT THE TENANT NAME IN THE DESIGNATE PROVIDING OPENSTACK HERE (FOR R1 USE THE SAME AS openstack_tenant_name) dnsaas_username: PUT THE DESIGNATE PROVIDING OPENSTACK'S USERNAME HERE dnsaas_password: PUT THE DESIGNATE PROVIDING OPENSTACK'S PASSWORD HERE dcae_keystone_url: PUT THE MULTIVIM PROVIDED KEYSTONE API URL HERE dcae_centos_7_image: PUT THE CENTOS7 VM IMAGE NAME HERE FOR DCAE LAUNCHED CENTOS7 VM dcae_domain: PUT THE NAME OF DOMAIN THAT DCAE VMS REGISTER UNDER dcae_public_key: PUT THE PUBLIC KEY OF A KEYPAIR HERE TO BE USED BETWEEN DCAE LAUNCHED VMS dcae_private_key: PUT THE SECRET KEY OF A KEYPAIR HERE TO BE USED BETWEEN DCAE LAUNCHED VMS |
Run the HEAT stack | obrienbiometrics:openlab michaelobrien$ openstack stack create -t onap_openstack.yaml -e onap_openstack.env ONAP1125_6 | id | 9b026354-c071-4e31-8611-11fef2f408f5 | | stack_name | ONAP1125_6 | | description | Heat template to install ONAP components | | creation_time | 2017-11-26T02:16:57Z | | updated_time | 2017-11-26T02:16:57Z | | stack_status | CREATE_IN_PROGRESS | | stack_status_reason | Stack CREATE started | obrienbiometrics:openlab michaelobrien$ openstack stack list | 9b026354-c071-4e31-8611-11fef2f408f5 | ONAP1125_6 | CREATE_IN_PROGRESS | 2017-11-26T02:16:57Z | 2017-11-26T02:16:57Z |
Wait for deployment | DCEA and several mutli-service VM's down obrienbiometrics:openlab michaelobrien$ openstack server list | db5388c0-9fa5-4359-ad21-689dd0ce8955 | onap-multi-service | ERROR | | ubuntu-16-04-cloud-amd64 | | d712dce1-d39d-4c6e-8d21-d9da9aa40ea1 | onap-dcae-bootstrap | ACTIVE | oam_onap_awsf=10.0.4.1, 10.12.5.197 | ubuntu-16-04-cloud-amd64 | | 4724fa8e-e10b-46cb-a81d-e7a9a7df041e | onap-aai-inst1 | ACTIVE | oam_onap_awsf=10.0.1.1, 10.12.5.118 | ubuntu-14-04-cloud-amd64 | | bc4ef1f3-422d-4e66-a21b-8c5a3d206938 | onap-portal | ACTIVE | oam_onap_awsf=10.0.9.1, 10.12.5.241 | ubuntu-14-04-cloud-amd64 | | 0f9edb8e-a379-4ab1-a6b1-c24763b69ecd | onap-policy | ACTIVE | oam_onap_awsf=10.0.6.1, 10.12.5.17 | ubuntu-14-04-cloud-amd64 | | bd1f29e3-e05e-4570-9f41-94af83aec7d6 | onap-aai-inst2 | ACTIVE | oam_onap_awsf=10.0.1.2, 10.12.5.252 | ubuntu-14-04-cloud-amd64 | | 57e90b08-d69e-4770-a298-97f64387e60d | onap-dns-server | ACTIVE | oam_onap_awsf=10.0.100.1, 10.12.5.237 | ubuntu-14-04-cloud-amd64 | | e9dd8800-0f77-4658-90b0-db98f4689485 | onap-message-router | ACTIVE | oam_onap_awsf=10.0.11.1, 10.12.5.234 | ubuntu-14-04-cloud-amd64 | | af6120d8-419a-45f9-ae32-b077b9ace407 | onap-sdnc | ACTIVE | oam_onap_awsf=10.0.7.1, 10.12.5.226 | ubuntu-14-04-cloud-amd64 | | b6daf774-dc6a-4c9b-aaa3-ca8fc5734ac3 | onap-clamp | ACTIVE | oam_onap_awsf=10.0.12.1, 10.12.5.128 | ubuntu-16-04-cloud-amd64 | | 31524fcb-d1b2-427b-b0bf-29e8fc65fded | onap-sdc | ACTIVE | oam_onap_awsf=10.0.3.1, 10.12.5.92 | ubuntu-16-04-cloud-amd64 | | 31f8c1e7-a7e7-417d-a9df-cc5d65d7777c | onap-vid | ACTIVE | oam_onap_awsf=10.0.8.1, 10.12.5.218 | ubuntu-14-04-cloud-amd64 | | 482befc8-2a6a-4da7-8e05-8f8b294f80d2 | onap-robot | ACTIVE | oam_onap_awsf=10.0.10.1, 10.12.6.21 | ubuntu-16-04-cloud-amd64 | | 8ea76387-aadf-46da-8257-5e9c2f80fa48 | onap-appc | ACTIVE | oam_onap_awsf=10.0.2.1, 10.12.5.222 | ubuntu-14-04-cloud-amd64 | | 43b90061-885f-454b-8830-9da3338fca56 | onap-so | ACTIVE | oam_onap_awsf=10.0.5.1, 10.12.5.230 | ubuntu-16-04-cloud-amd64 | |
check robot health Core components are PASS so lets continue with the vFW | root@onap-robot:/opt# ./ete.sh health Starting Xvfb on display :88 with res 1280x1024x24 Executing robot tests at log level TRACE ============================================================================== OpenECOMP ETE ============================================================================== OpenECOMP ETE.Robot ============================================================================== OpenECOMP ETE.Robot.Testsuites ============================================================================== OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp components are... ============================================================================== Basic DCAE Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a10ae90>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249d247d0>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc2481a1050>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.4.1', port=8080): Max retries exceeded with url: /healthcheck (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24819ac90>: Failed to establish a new connection: [Errno 111] Connection refused',)) ------------------------------------------------------------------------------ Basic SDNGC Health Check | PASS | ------------------------------------------------------------------------------ Basic A&AI Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x7fc24a256d50>: Failed to establish a new connection: [Errno 111] Connection refused',)': /aai/util/echo?action=long [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x7fc24a256d10>: Failed to establish a new connection: [Errno 111] Connection refused',)': /aai/util/echo?action=long [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x7fc24a23b690>: Failed to establish a new connection: [Errno 111] Connection refused',)': /aai/util/echo?action=long | FAIL | ConnectionError: HTTPSConnectionPool(host='10.0.1.1', port=8443): Max retries exceeded with url: /aai/util/echo?action=long (Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x7fc24a172710>: Failed to establish a new connection: [Errno 111] Connection refused',)) ------------------------------------------------------------------------------ Basic Policy Health Check | PASS | ------------------------------------------------------------------------------ Basic MSO Health Check | PASS | ------------------------------------------------------------------------------ Basic ASDC Health Check | PASS | ------------------------------------------------------------------------------ Basic APPC Health Check | PASS | ------------------------------------------------------------------------------ Basic Portal Health Check | PASS | ------------------------------------------------------------------------------ Basic Message Router Health Check | PASS | ------------------------------------------------------------------------------ Basic VID Health Check | PASS | ------------------------------------------------------------------------------ Basic Microservice Bus Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a01e8d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /iui/microservices/default.html [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a01e550>: Failed to establish a new connection: [Errno 113] No route to host',)': /iui/microservices/default.html [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a026110>: Failed to establish a new connection: [Errno 113] No route to host',)': /iui/microservices/default.html | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /iui/microservices/default.html (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a026350>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ Basic CLAMP Health Check | PASS | ------------------------------------------------------------------------------ catalog API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1903d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/catalog/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a2af550>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/catalog/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a15d490>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/catalog/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/catalog/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a10abd0>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ emsdriver API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a070310>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/emsdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a070b10>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/emsdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1d1b10>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/emsdriver/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/emsdriver/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1d10d0>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ gvnfmdriver API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a24b410>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/gvnfmdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a24b910>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/gvnfmdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a24b6d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/gvnfmdriver/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/gvnfmdriver/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a24b390>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ huaweivnfmdriver API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1df850>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/huaweivnfmdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a24bb90>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/huaweivnfmdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1f01d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/huaweivnfmdriver/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/huaweivnfmdriver/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1d10d0>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ multicloud API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a190f90>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud/v0/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1dfa10>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud/v0/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1df0d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud/v0/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/multicloud/v0/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1df290>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ multicloud-ocata API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1b11d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-ocata/v0/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1a8090>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-ocata/v0/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1a8b50>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-ocata/v0/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/multicloud-ocata/v0/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1a8b90>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ multicloud-titanium_cloud API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1ba750>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-titanium_cloud/v0/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1a8fd0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-titanium_cloud/v0/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1a8810>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-titanium_cloud/v0/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/multicloud-titanium_cloud/v0/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1b1910>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ multicloud-vio API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a24b410>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-vio/v0/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1ba210>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-vio/v0/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1baa90>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/multicloud-vio/v0/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/multicloud-vio/v0/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1baf10>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ nokiavnfmdriver API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a209c90>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/nokiavnfmdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1c2fd0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/nokiavnfmdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1c2b90>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/nokiavnfmdriver/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/nokiavnfmdriver/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1c2c50>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ nslcm API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a3048d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/nslcm/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a2bff50>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/nslcm/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1c2050>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/nslcm/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/nslcm/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a2bfad0>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ resmgr API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1df850>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/resmgr/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1b1510>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/resmgr/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a1a8310>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/resmgr/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/resmgr/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a2f0790>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ usecaseui-gui API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0d3d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /iui/usecase-ui/ [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0d590>: Failed to establish a new connection: [Errno 113] No route to host',)': /iui/usecase-ui/ [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0d750>: Failed to establish a new connection: [Errno 113] No route to host',)': /iui/usecase-ui/ | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /iui/usecase-ui/ (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0d8d0>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ vnflcm API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cc8590>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnflcm/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0d490>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnflcm/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0da50>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnflcm/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/vnflcm/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a2f0a50>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ vnfmgr API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a209a50>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnfmgr/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cc8350>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnfmgr/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cc8510>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnfmgr/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/vnfmgr/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cc8790>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ vnfres API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ccd390>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnfres/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ccd550>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnfres/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ccd710>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/vnfres/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/vnfres/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ccd890>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ workflow API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc24a2bfad0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/workflow/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ccdf10>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/workflow/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cc8cd0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/workflow/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/workflow/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cc8990>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ ztesdncdriver API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0d410>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/ztesdncdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc249c0d510>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/ztesdncdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cdc450>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/ztesdncdriver/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/ztesdncdriver/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247cdc650>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ ztevmanagerdriver API Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ce6210>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/ztevmanagerdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ce63d0>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/ztevmanagerdriver/v1/swagger.json [ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ce6590>: Failed to establish a new connection: [Errno 113] No route to host',)': /api/ztevmanagerdriver/v1/swagger.json | FAIL | ConnectionError: HTTPConnectionPool(host='10.0.14.1', port=80): Max retries exceeded with url: /api/ztevmanagerdriver/v1/swagger.json (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc247ce6710>: Failed to establish a new connection: [Errno 113] No route to host',)) ------------------------------------------------------------------------------ OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp compo... | FAIL | 30 critical tests, 9 passed, 21 failed 30 tests total, 9 passed, 21 failed ============================================================================== OpenECOMP ETE.Robot.Testsuites | FAIL | 30 critical tests, 9 passed, 21 failed 30 tests total, 9 passed, 21 failed ============================================================================== OpenECOMP ETE.Robot | FAIL | 30 critical tests, 9 passed, 21 failed 30 tests total, 9 passed, 21 failed ============================================================================== OpenECOMP ETE | FAIL | 30 critical tests, 9 passed, 21 failed 30 tests total, 9 passed, 21 failed |
Test Deployments
20171125:2100: HEAT
Ran out of ram on
Ran out of ram for onap-multi-service | No valid host was found. There are not enough hosts available. compute-08: (RamFilter) Insufficient usable RAM: req:16384, avail:3297.0 MB, compute-09: (RamFilter) Insufficient usable RAM: req:16384, avail:13537.0 MB, compute-06: (RamFilter) Insufficient robot vm docker containers down root@onap-robot:/opt# ./robot_vm_init.sh Already up-to-date. Already up-to-date. Login Succeeded 1.1-STAGING-latest: Pulling from openecomp/testsuite Digest: sha256:5f48706ba91a4bb805bff39e67bb52b26011d59f690e53dfa1d803745939c76a Status: Image is up to date for nexus3.onap.org:10001/openecomp/testsuite:1.1-STAGING-latest Error response from daemon: No such container: openecompete_container fix: wait for them CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 77c6eba8c641 nexus3.onap.org:10001/onap/sniroemulator:latest "/docker-entrypoin..." 30 seconds ago Up 29 seconds 8080-8081/tcp, 0.0.0.0:8080->9999/tcp sniroemulator 903964fc8fe1 nexus3.onap.org:10001/openecomp/testsuite:1.1-STAGING-latest "lighttpd -D -f /e..." 30 seconds ago Up 29 seconds 0.0.0.0:88->88/tcp openecompete_container |
Wait for deployment |